AAON ASM08077 240V Motor Speed Controller

സ്പെസിഫിക്കേഷനുകൾ
- Logic Power Source: 18-30 VAC @ 3VA
- Motor Power Source: 204-254 വി.ആർ.സി.
- പവർ എസി ഫ്രീക്വൻസി: 59-61 Hz
- മോട്ടോർ നിലവിലെ റേറ്റിംഗ്: 4 എ
- മോട്ടോർ അനുയോജ്യത: പെർമനന്റ് സ്പ്ലിറ്റ് കപ്പാസിറ്റർ അല്ലെങ്കിൽ ഷേഡഡ് പോൾ
- Full Speed Startup Time: 15 സെക്കൻഡ്
- Analog Control Range: 1000-3400 ആർപിഎം
- പവർ കണക്ഷനുകൾ: 1/4 quick-connect tabs
- Analog Input Connections: ടെർമിനൽ ബ്ലോക്ക്, 14 ജിഎ മാക്സ്
- Tach Sensor Connections: 3-pin 0.1 MTA Connector
- UL Classification: UL 60730-1, Automatic Electrical Controls
ഉൽപ്പന്ന ഉപയോഗ നിർദ്ദേശങ്ങൾ
ഇൻസ്റ്റലേഷൻ
- മൗണ്ടിംഗ്: The Motor Speed Controller comes with a factory-mounted aluminum base plate to regulate temperature and assist in heat dissipation.
നിയന്ത്രണ സവിശേഷതകൾ
- The Motor Speed Controller is designed to control the speed of PSC or shaded-pole fan motors in combustion air blowers. It utilizes Hall effect tachometer sensors for precise speed control based on dip switch settings.
സ്പീഡ് മോഡുകൾ
- The controller offers two speed modes – low and high speed, which are controlled by 24 VAC control power inputs.
ഇലക്ട്രിക്കൽ, എൻവയോൺമെൻ്റൽ സ്പെസിഫിക്കേഷനുകൾ
- The controller requires a Logic Power Source of 18-30 VAC @ 3VA and a Motor Power Source of 204-254 VAC. It is compatible with motors operating at a frequency of 59-61 Hz and a current rating of 4 A.
Analog Control Range
- The analog control range of the Motor Speed Controller is between 1000-3400 RPM, providing flexibility in motor speed adjustments.
ആമുഖം
ഇഷ്ടാനുസൃതമാക്കാവുന്ന നിയന്ത്രണ പരിഹാരങ്ങൾ ഉപയോഗിച്ച് നിയന്ത്രണത്തിൽ തുടരുക. നിങ്ങളുടെ HVAC സിസ്റ്റങ്ങളുടെ പ്രവർത്തനം ഒപ്റ്റിമൽ ആയി നിയന്ത്രിക്കുന്നതിനും നിരീക്ഷിക്കുന്നതിനുമായി AAON വൈവിധ്യമാർന്ന നിയന്ത്രണ പരിഹാരങ്ങൾ വാഗ്ദാനം ചെയ്യുന്നു.
ഫിസിക്കൽ
Control the speed of PSC or shaded-pole fan motors
- ജ്വലന എയർ ബ്ലോവറുകളിലെ ആൾട്ടർനേറ്റിംഗ് കറന്റ് (എസി) ഇൻഡക്ഷൻ മോട്ടോറുകളുടെ വേഗത നിയന്ത്രിക്കുന്നതിനാണ് മോട്ടോർ സ്പീഡ് കൺട്രോളർ രൂപകൽപ്പന ചെയ്തിരിക്കുന്നത്.
- ബ്ലോവർ വേഗത നിയന്ത്രണം സുഗമമാക്കുന്നതിന് ഹാൾ ഇഫക്റ്റ് ടാക്കോമീറ്റർ സെൻസറുകൾ ഉൾപ്പെടുത്തിയ ബ്ലോവർ മോട്ടോറുകൾക്കൊപ്പം മോട്ടോർ സ്പീഡ് കൺട്രോളർ ഉപയോഗിക്കുന്നു.
- The Motor Speed Controller controls speed based on the dip switch settings. The controller provides two speed modes: low and high speed.
- The two modes are controlled by 24 VAC control power inputs.
ഇലക്ട്രിക്കൽ ആൻഡ് എൻവയോൺമെന്റൽ
| ലോജിക് പവർ സോഴ്സ് | 18-30 VAC @ 3VA |
| മോട്ടോർ പവർ സ്രോതസ്സ് | 204-254 വി.ആർ.സി. |
| പവർ എസി ഫ്രീക്വൻസി | 59-61 Hz |
| മോട്ടോർ കറന്റ് റേറ്റിംഗ് | 4 എ |
| മോട്ടോർ അനുയോജ്യത | പെർമനന്റ് സ്പ്ലിറ്റ് കപ്പാസിറ്റർ അല്ലെങ്കിൽ ഷേഡഡ് പോൾ |
| പൂർണ്ണ വേഗതയുള്ള ആരംഭ സമയം | 15 സെക്കൻഡ് |
| പവർ കണക്ഷനുകൾ | 1/4” ക്വിക്ക്-കണക്റ്റ് ടാബുകൾ |
| അനലോഗ് ഇൻപുട്ട് കണക്ഷനുകൾ | ടെർമിനൽ ബ്ലോക്ക്, 14 ജിഎ മാക്സ് |
| സെൻസർ കണക്ഷനുകൾ ടാക്ക് ചെയ്യുക | 3-പിൻ 0.1” MTA കണക്റ്റർ |
| Analog Control Range | 1000-3400 ആർപിഎം |
| സംഭരണ താപനില | -40°C മുതൽ 85°C വരെ |
| പ്രവർത്തന താപനില | -40°C മുതൽ 70°C വരെ |
| UL വർഗ്ഗീകരണം | UL 60730-1, Automatic Electrical Controls |
അളവുകൾ

കുറിപ്പ്: എല്ലാ അളവുകളും ഇഞ്ചിലാണ്.
ഇൻസ്റ്റലേഷൻ
മൗണ്ടിംഗ്
- The Motor Speed Controller has a factory-mounted aluminum base plate. The metal base plate helps the controller regulate temperature and facilitate proper heat dissipation.
കസ്റ്റമർ സർവീസ്
ഉൽപ്പന്നത്തെക്കുറിച്ചുള്ള കൂടുതൽ വിവരങ്ങൾക്ക് കോഡ് സ്കാൻ ചെയ്യുക.
- MOTOR_SPEED_CONTROLLER_240V_INSTL_20251104
- സാങ്കേതിക സഹായത്തിന് AAON പിന്തുണയുമായി ബന്ധപ്പെടുക. www.aaon.com/കോൺടാക്റ്റ്

പതിവായി ചോദിക്കുന്ന ചോദ്യങ്ങൾ
How can I adjust the speed modes on the Motor Speed Controller?
The speed modes (low and high speed) are controlled by adjusting the dip switch settings and providing the appropriate 24 VAC control power inputs.
What type of motors is the Motor Speed Controller compatible with?
The controller is compatible with Permanent Split Capacitor or Shaded Pole motors used in combustion air blowers.
പ്രമാണങ്ങൾ / വിഭവങ്ങൾ
![]() |
AAON ASM08077 240V Motor Speed Controller [pdf] ഉടമയുടെ മാനുവൽ ASM08077, ASM08077 240V Motor Speed Controller, 240V Motor Speed Controller, Motor Speed Controller, Speed Controller |

