ആമുഖം
Thank you for choosing the wolfcraft 60mm Pointed Spring Clamps. These precision clamps are designed for a variety of tasks, particularly those requiring delicate handling and access to confined spaces. Their robust construction and thoughtful design ensure reliable performance for both home and craft projects.
This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your new clamps. Please read it thoroughly before first use and keep it for future reference.
സുരക്ഷാ വിവരങ്ങൾ
Always observe the following safety precautions when using the wolfcraft 60mm Pointed Spring Clamps:
- ഉപയോഗിക്കുന്നതിന് മുമ്പ് പരിശോധിക്കുക: Cl ഉറപ്പാക്കുകamps are free from damage before each use. Do not use damaged clamps.
- Secure grip: എല്ലായ്പ്പോഴും cl ഉറപ്പാക്കുകamp has a firm grip on the workpiece. Avoid over-extending the jaws beyond their intended capacity.
- ഉപരിതല സംരക്ഷണം: While the jaws are designed to be soft, always test on a scrap piece or use additional padding if clamping delicate or finished surfaces.
- ചൂട് ഒഴിവാക്കുക: cl തുറന്നുകാട്ടരുത്amps to excessive heat, such as from soldering irons, as this may damage the plastic material and jaw pads.
- വ്യക്തമായി സൂക്ഷിക്കുക: Keep fingers and other body parts clear of the clampനുള്ളുന്നത് തടയാൻ ഇങ്ങ് ഏരിയ.
- സംഭരണം: സ്റ്റോർ clamps in a dry, clean place, out of reach of children.
സജ്ജമാക്കുക
The wolfcraft 60mm Pointed Spring Clamps are ready for immediate use out of the packaging. No assembly is required.
- cl നീക്കം ചെയ്യുകamps from their packaging.
- Inspect each clamp for any visible damage or defects.
- Familiarize yourself with the clamping mechanism by gently squeezing the handles to open the jaws and releasing to close them.
Figure 1: The wolfcraft 60mm Pointed Spring Clamps as they appear out of the package.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
ഈ clamps are designed for precision work and general clamping needs. Follow these steps for optimal use:
- cl തിരിച്ചറിയുകampപ്രദേശം: Determine the specific point on your workpiece where clamping pressure is needed. The narrow design of these clamps allows access to tight or intricate areas.
- Open the jaws: Squeeze the handles firmly to open the clamping jaws. The maximum clamping width is 60mm.
- cl സ്ഥാനംamp: Place the open jaws around the workpiece. Ensure the soft precision clamping jaws make full contact with the surfaces to be held. The grooved surface on the jaws provides an enhanced grip.
- സമ്മർദ്ദം ചെലുത്തുക: Slowly release the handles. The spring mechanism will apply consistent pressure, holding the workpiece securely. The soft jaws are designed to apply pressure without damaging the surface.
- ആവശ്യമെങ്കിൽ ക്രമീകരിക്കുക: If the workpiece shifts or the grip is not sufficient, remove the clamp and reposition it. The brushed surface of the handle ensures a non-slip grip during operation.
Figure 2: Using the clamp for precision work, such as holding a model car door.
Figure 3: The narrow design allows for clamping small components on circuit boards.
ചിത്രം 4: വശം view illustrating the narrow design and soft jaw tips.
മെയിൻ്റനൻസ്
Proper maintenance ensures the longevity and optimal performance of your clamps:
- വൃത്തിയാക്കൽ: After each use, wipe the clamps with a clean, dry cloth to remove any dust, glue, or debris. For stubborn residue, a slightly damp തുണി ഉപയോഗിക്കാം, തുടർന്ന് നന്നായി ഉണക്കാം.
- ലൂബ്രിക്കേഷൻ: The pivot point of the clamp is designed for smooth operation and generally does not require lubrication. If movement becomes stiff, a small amount of dry lubricant (e.g., silicone spray) can be applied, ensuring it does not get onto the clampതാടിയെല്ലുകൾ.
- സംഭരണം: സ്റ്റോർ clamps in a clean, dry environment away from direct sunlight and extreme temperatures. Keeping them organized will prevent damage and make them easier to find for future projects.
Figure 5: The textured handle provides a secure, non-slip grip.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Clamp സുരക്ഷിതമായി പിടിക്കുന്നില്ല | Workpiece too thick; jaws not making full contact; jaws are dirty. | Ensure workpiece is within 60mm capacity. Reposition clamp for full jaw contact. Clean jaws thoroughly. |
| Surface damage on workpiece | Excessive pressure on delicate surface; jaws are dirty or damaged. | Use additional padding (e.g., cloth, rubber) between jaws and workpiece. Clean jaws. Inspect for damage; replace if necessary. |
| Clamp feels stiff or sticky | Accumulation of dirt/debris at pivot point. | Clean the pivot area. Apply a small amount of dry lubricant if needed. |
സ്പെസിഫിക്കേഷനുകൾ
- മോഡൽ നമ്പർ: 3431000
- ബ്രാൻഡ്: ചെന്നായ
- മെറ്റീരിയൽ: പ്ലാസ്റ്റിക്
- Clamping Width: 60 മിമി (ഏകദേശം 2.36 ഇഞ്ച്)
- ഇനത്തിൻ്റെ ഭാരം: Approximately 0.32 ounces (per clamp)
- കഷണങ്ങളുടെ എണ്ണം: 2 (ഓരോ പാക്കേജിനും)
- ഫീച്ചറുകൾ: Soft precision clamping jaws, narrow design, grooved surface, brushed non-slip handle.
Figure 6: Close-up of the soft, grooved clampതാടിയെല്ലുകൾ.
വാറൻ്റിയും പിന്തുണയും
wolfcraft products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official wolfcraft website. If you encounter any issues or require technical assistance, please contact wolfcraft customer support through their official channels.
കൂടുതൽ വിവരങ്ങൾക്ക്, ഉദ്യോഗസ്ഥനെ സന്ദർശിക്കുക ചെന്നായ webസൈറ്റ്.