Audiovox APS95BT2 2-Button Code Learning Transmitter User Manual

ആമുഖം

This manual provides comprehensive instructions for the Audiovox APS95BT2 2-Button Code Learning Transmitter. This device is designed as a replacement remote for compatible Prestige/Audiovox alarm systems, offering reliable control over your vehicle's security features. It is a 2-button transmitter capable of operating on a maximum of 3 RF channels.

Image: The Audiovox APS95BT2 2-Button Code Learning Transmitter, a compact black remote with two buttons and a small LED indicator, attached to a keyring with a car key.

സജ്ജീകരണവും പ്രോഗ്രാമിംഗും

The APS95BT2 transmitter requires programming to synchronize with your vehicle's alarm system. Programming instructions are included with the product. For optimal results, it is recommended to consult your specific vehicle alarm system's manual for detailed programming steps, as procedures can vary.

General Programming Steps (Consult your system's manual for specifics):

1. Locate the programming button or switch on your vehicle's alarm control module. This is often found under the dashboard or near the fuse box.
2. Turn the vehicle's ignition key to the ON position.
3. Press and release the programming button/switch a specific number of times as indicated by your alarm system's manual (e.g., 3 times). The system may respond with a chirp or LED flash.
4. Within a few seconds, press any button on the new APS95BT2 transmitter. The system should respond with a chirp, confirming successful programming.
5. If programming multiple transmitters, repeat step 4 for each additional transmitter.
6. Turn the ignition key to the OFF position to exit programming mode.

കുറിപ്പ്: If you are programming multiple transmitters, ensure all existing and new transmitters are programmed during the same session. Programming a new transmitter without re-programming existing ones may cause the older transmitters to lose their programming.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The APS95BT2 transmitter features two primary buttons for controlling your vehicle's alarm system.

• Button 1 (Lock/Arm): Typically used to arm the alarm system and lock the vehicle's doors. Pressing this button will usually result in a single chirp from the alarm system and a flash of the vehicle's parking lights.
• Button 2 (Unlock/Disarm): Typically used to disarm the alarm system and unlock the vehicle's doors. Pressing this button will usually result in two chirps from the alarm system and a flash of the vehicle's parking lights.

Specific functions may vary slightly depending on the configuration of your Prestige/Audiovox alarm system. Refer to your alarm system's manual for a complete list of functions and their corresponding button presses.

മെയിൻ്റനൻസ്

ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ:

The APS95BT2 transmitter includes a remote battery. When the transmitter's range decreases significantly or the LED indicator (if present) fails to light up, it may be time to replace the battery. The battery type is typically a standard coin cell battery (e.g., CR2032), but it is advisable to check the existing battery upon opening the casing.

1. Carefully open the transmitter casing, usually by prying it apart at a seam with a small flat-head screwdriver or a specialized tool.
2. നിലവിലുള്ള ബാറ്ററി നീക്കം ചെയ്യുന്നതിനുമുമ്പ് അതിന്റെ ഓറിയന്റേഷൻ ശ്രദ്ധിക്കുക.
3. ശരിയായ പോളാരിറ്റി ഉപയോഗിച്ച് പുതിയ ബാറ്ററി ചേർക്കുക.
4. Snap the transmitter casing സുരക്ഷിതമായി തിരികെ ഒരുമിച്ച് ചേർക്കുക.

പ്രാദേശിക നിയന്ത്രണങ്ങൾ അനുസരിച്ച് പഴയ ബാറ്ററികൾ ഉത്തരവാദിത്തത്തോടെ നീക്കം ചെയ്യുക.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

• മോഡൽ: APS95BT2
• ബ്രാൻഡ്: ഓഡിയോവോക്സ്
• ട്രാൻസ്മിറ്റർ തരം: 2-Button Code Learning Transmitter
• FCC ഐഡി: ELVAT5C
• RF ചാനലുകൾ: Maximum 3 RF Channel Capable
• അളവുകൾ: ഏകദേശം 1.25 x 3.88 x 3.88 ഇഞ്ച്
• ഭാരം: ഏകദേശം 0.8 ഔൺസ്
• ഊർജ്ജ സ്രോതസ്സ്: Remote battery (included)
• അനുയോജ്യമായ ഉപകരണങ്ങൾ: Prestige/Audiovox car alarm systems

വാറൻ്റി വിവരങ്ങൾ

The Audiovox APS95BT2 transmitter comes with a 60 മാസ പരിമിത വാറൻ്റി. This warranty typically covers defects in materials and workmanship under normal use. For specific terms, conditions, and claim procedures, please refer to the warranty documentation provided with your purchase or contact Audiovox customer support.

പിന്തുണയും കോൺടാക്‌റ്റും

For further assistance, technical support, or inquiries regarding your Audiovox APS95BT2 transmitter, please contact Audiovox customer service or visit their official website. Ensure you have your product model number (APS95BT2) and any relevant purchase information ready when seeking support.

Official Audiovox Webസൈറ്റ്: www.audiovox.com