NEIKO 40282

Neiko 40282 Super-Bright 28-LED Aluminum Flashlight User Manual

മോഡൽ: 40282

ആമുഖം

Thank you for choosing the Neiko 40282 Super-Bright 28-LED Aluminum Flashlight. This compact and durable flashlight is designed to provide reliable illumination for various tasks. Featuring 28 high-efficiency LED lights, an anodized aluminum body, and water and shock resistance, it is built for longevity and performance. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your flashlight.

Neiko 40282 Super-Bright 28-LED Aluminum Flashlight, Gunmetal Silver

ചിത്രം 1: Neiko 40282 Super-Bright 28-LED Aluminum Flashlight. This image shows the overall design of the flashlight, highlighting its gunmetal silver finish and compact size.

സജ്ജമാക്കുക

ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

Your Neiko 40282 flashlight requires three (3) AAA batteries, which are included with the product. Follow these steps to install or replace the batteries:

  1. Unscrew the Tail Cap: Hold the flashlight body firmly and twist the tail cap counter-clockwise until it detaches.
  2. ബാറ്ററികൾ ചേർക്കുക: Locate the battery holder inside the flashlight. Insert three AAA batteries into the holder, ensuring that the positive (+) and negative (-) terminals align correctly with the markings on the holder.
  3. Reattach Tail Cap: Carefully slide the battery holder back into the flashlight body. Align the tail cap with the body and twist it clockwise until it is securely tightened. Do not overtighten.
Flashlight with tail cap removed, showing battery compartment

ചിത്രം 2: Illustrative image of the flashlight's tail cap and battery compartment. This image represents where the tail cap is located and how it can be removed to access the battery holder for installation or replacement.

Holster Attachment

A poly canvas belt holster pouch is included for convenient carrying. Simply slide your flashlight into the pouch and attach the pouch to your belt or gear using its loop.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

ഓൺ/ഓഫ് ചെയ്യുന്നു

To operate the flashlight, use the push-button switch located on the tail cap:

  • ഓണാക്കാൻ: Press the tail cap switch firmly until it clicks. The 28 LED lights will illuminate.
  • ഓഫാക്കാൻ: Press the tail cap switch firmly again until it clicks. The lights will turn off.
Close-up of flashlight tail cap switch

ചിത്രം 3: ക്ലോസ് അപ്പ് view of the flashlight's tail cap, indicating the location of the power switch. This image helps users identify the switch for turning the flashlight on and off.

പൊതുവായ ഉപയോഗം

The Neiko 40282 flashlight is suitable for a wide range of applications, including household use, outdoor activities, emergency situations, and professional tasks where bright, reliable light is needed.

മെയിൻ്റനൻസ്

വൃത്തിയാക്കൽ

To clean your flashlight, wipe the exterior with a soft, damp തുണി. അബ്രാസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്, കാരണം ഇവ ഫിനിഷിനോ ആന്തരിക ഘടകങ്ങൾക്കോ ​​കേടുവരുത്തും.

ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

When the light output begins to dim, it is an indication that the batteries need to be replaced. Refer to the "Battery Installation" section for instructions on how to replace the AAA batteries.

സംഭരണം

For prolonged periods of non-use (e.g., more than one month), it is recommended to remove the batteries from the flashlight to prevent potential leakage and damage to the device.

വെള്ളം, ഷോക്ക് പ്രതിരോധം

The flashlight features a water-resistant design, meaning it can withstand splashes and light rain. It is not designed for submersion in water. Its aluminum construction also provides shock resistance against minor impacts.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your Neiko 40282 flashlight, please refer to the following common problems and solutions:

  • Flashlight Does Not Turn On:
    • Ensure the batteries are installed correctly with the correct polarity (+/-).
    • Check if the batteries are depleted and replace them with fresh AAA batteries.
    • Verify that the tail cap is securely tightened. A loose tail cap can prevent electrical contact.
  • Light Flickers or Dims Intermittently:
    • This often indicates low battery power. Replace all three AAA batteries with new ones.
    • Ensure the battery holder and contacts are clean and free of debris.
    • Confirm the tail cap is fully tightened to ensure consistent electrical connection.

ഈ ഘട്ടങ്ങൾ പ്രശ്നം പരിഹരിക്കുന്നില്ലെങ്കിൽ, കൂടുതൽ സഹായത്തിനായി ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

സ്പെസിഫിക്കേഷനുകൾ

മോഡൽ നമ്പർ40282
പ്രകാശ സ്രോതസ്സ്28 എൽ.ഇ.ഡി
പവർ ഉറവിടം3 x AAA ബാറ്ററികൾ (ഉൾപ്പെട്ടിരിക്കുന്നു)
മെറ്റീരിയൽആനോഡൈസ്ഡ് അലുമിനിയം
അളവുകൾ (L x W x H)4 x 1 x 1 ഇഞ്ച്
ഇനത്തിൻ്റെ ഭാരം7.2 ഔൺസ്
ബാറ്ററി ലൈഫ്ഏകദേശം 5 മണിക്കൂർ (തുടർച്ചയായ ഉപയോഗം)
LED ആയുസ്സ്100,000 മണിക്കൂർ വരെ
പ്രത്യേക സവിശേഷതകൾDurable, Water Resistant, Shock Resistant

വാറൻ്റിയും പിന്തുണയും

For information regarding the product warranty, please refer to the documentation provided at the time of purchase or contact your retailer. NEIKO stands behind its products, and for any support inquiries, please visit the official NEIKO webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുക.

നിർമ്മാതാവ്: Grace Marketing- HI

ബ്രാൻഡ്: NEIKO

© 2024 NEIKO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.