Moen TS214
Moen Waterhill Two-Handle High Arc Roman Tub Faucet
Model: TS214 | Brand: Moen
ആമുഖം
This manual provides detailed instructions for the installation, operation, and maintenance of your Moen Waterhill Two-Handle High Arc Roman Tub Faucet. The intricate charm of the Waterhill series is designed to add character and enrich your home's aesthetic. Please read this manual thoroughly before beginning installation or operation to ensure proper function and longevity of your product.
പ്രധാന സവിശേഷതകൾ
- Chrome ഫിനിഷ്: Creates a bright, highly reflective, cool grey metallic look.
- രണ്ട് കൈകളുള്ള ലിവർ ഡിസൈൻ: For ease of use and precise control of water temperature and flow.
- Rotating Spout: Features a locking mechanism for versatile positioning.
- M-PACT പൊതു വാൽവ് സിസ്റ്റം: Designed for easy future upgrades without replacing plumbing.
സുരക്ഷാ വിവരങ്ങൾ
Always turn off the main water supply before installing or servicing the faucet. Wear appropriate personal protective equipment, such as safety glasses, during installation. If you are unsure about any part of the installation process, consult a qualified plumber.
പാക്കേജ് ഉള്ളടക്കം
ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക.
- Moen Waterhill Two-Handle High Arc Roman Tub Faucet (TS214)
- മൌണ്ടിംഗ് ഹാർഡ്വെയർ
- ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ
Note: Moen valves (Valve No. 4992 or 4993) are NOT included and are required for operation. These must be purchased separately.
ഇൻസ്റ്റലേഷൻ ഗൈഡ്
1. പ്രീ-ഇൻസ്റ്റലേഷൻ
- Ensure main water supply is turned off.
- Clear the installation area.
- Gather all necessary tools: adjustable wrench, plumber's putty, silicone sealant, screwdriver, tape measure.
- Confirm you have the required Moen valve (4992 or 4993) for your specific setup.
2. Faucet Assembly and Mounting
- Install the Moen M-PACT valve body (sold separately) according to its specific instructions.
- Apply a thin bead of plumber's putty or silicone sealant around the base of the faucet spout and handles.
- Insert the faucet spout and handle assemblies through the mounting holes on the tub deck.
- From underneath the tub deck, secure the faucet and handles using the provided mounting nuts and washers. Tighten firmly but do not overtighten.
3. Water Supply Connections
- Connect the hot and cold water supply lines to the corresponding inlets on the valve body. Use an adjustable wrench to tighten connections, ensuring no leaks.
- ജലവിതരണം ഓണാക്കുന്നതിന് മുമ്പ് എല്ലാ കണക്ഷനുകളും സുരക്ഷിതമാണെന്ന് ഉറപ്പാക്കുക.
4. അവസാന ഘട്ടങ്ങൾ
- Turn on the main water supply slowly and check for any leaks.
- Remove the aerator from the spout and flush the faucet for a few minutes to clear any debris from the lines. Reinstall the aerator.
- Test the hot and cold water flow and temperature control.

Figure 1: Moen Waterhill Two-Handle High Arc Roman Tub Faucet (TS214) in Chrome finish, showing the spout and two lever handles.
ഓപ്പറേഷൻ
The Moen Waterhill faucet features two lever handles for independent control of hot and cold water. Turn the left handle counter-clockwise for hot water and the right handle counter-clockwise for cold water. Adjust both handles to achieve the desired water temperature and flow. The high arc spout can be rotated for convenience and locked into position.
പരിചരണവും പരിപാലനവും
To maintain the beautiful chrome finish of your Moen faucet, clean it regularly with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish and void your warranty. For stubborn water spots, a mild soap and water solution can be used, followed by rinsing and drying.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| താഴ്ന്ന ജലപ്രവാഹം | അടഞ്ഞുപോയ എയറേറ്റർ; ഭാഗികമായി അടഞ്ഞ ഷട്ട്-ഓഫ് വാൽവ്; വിതരണ ലൈനുകളിൽ അവശിഷ്ടങ്ങൾ. | Remove and clean aerator; ensure shut-off valves are fully open; flush supply lines. |
| സ്പൗട്ടിൽ നിന്ന് ചോർച്ച | പഴകിയ കാട്രിഡ്ജ്; കാട്രിഡ്ജിലെ അവശിഷ്ടങ്ങൾ. | Replace cartridge (refer to Moen's website for replacement parts and instructions); clean cartridge. |
| ഫ്യൂസറ്റിന്റെ അടിഭാഗത്ത് ചോർച്ച | Improperly sealed base; loose mounting nuts. | Reapply plumber's putty/silicone sealant; tighten mounting nuts. |
സ്പെസിഫിക്കേഷനുകൾ
- മോഡൽ നമ്പർ: TS214
- ബ്രാൻഡ്: മോയിൻ
- പൂർത്തിയാക്കുക: Chrome
- മെറ്റീരിയൽ: ലോഹം
- ഹാൻഡിലുകളുടെ എണ്ണം: 2
- ഹാൻഡിൽ തരം: ലിവർ
- മൗണ്ടിംഗ് തരം: ഡെക്ക് മ .ണ്ട്
- ഇൻസ്റ്റലേഷൻ തരം: സെന്റർസെറ്റ്
- സ്പൗട്ട് റീച്ച്: 8.86 ഇഞ്ച്
- ഇനത്തിൻ്റെ ഭാരം: 9.31 പൗണ്ട്
- ഉൽപ്പന്ന അളവുകൾ: 8.88 x 15.88 x 7.69 ഇഞ്ച്
- UPC: 026508170267
വാറൻ്റിയും പിന്തുണയും
This Moen product is backed by a പരിമിതമായ ആജീവനാന്ത വാറൻ്റി. For detailed warranty information, product registration, replacement parts, or technical assistance, please visit the official Moen website or contact Moen customer service. Keep your proof of purchase for warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.