SAMSON SA-SPHONE
Samson S-phone Four Channel Headphone Ampജീവപര്യന്തം
മോഡൽ: SA-SPHONE
ഉപയോക്തൃ മാനുവൽ
1. ആമുഖം
The Samson S-phone is a professional four-channel headphone amplifier designed to provide high-quality audio distribution for multiple listeners. Each channel features independent controls, including volume, two-band equalization, and a stereo auxiliary input, allowing for customized mixes. This manual provides detailed instructions for the proper setup, operation, and maintenance of your S-phone ampജീവൻ.
2 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ
ഈ ഉപകരണം പ്രവർത്തിപ്പിക്കുന്നതിന് മുമ്പ് ദയവായി എല്ലാ സുരക്ഷാ നിർദ്ദേശങ്ങളും വായിച്ച് മനസ്സിലാക്കുക.
- ഊർജ്ജ സ്രോതസ്സ്: Connect the unit only to the specified power supply. Ensure the voltage യൂണിറ്റിന്റെ ആവശ്യകതകളുമായി പൊരുത്തപ്പെടുന്നു.
- വെൻ്റിലേഷൻ: വെന്റിലേഷൻ ദ്വാരങ്ങളൊന്നും തടയരുത്. അമിതമായി ചൂടാകുന്നത് തടയാൻ യൂണിറ്റിന് ചുറ്റും മതിയായ വായുസഞ്ചാരം ഉറപ്പാക്കുക.
- ജലവും ഈർപ്പവും: Do not expose this unit to rain or moisture. Do not place objects filled with liquids on the unit.
- സേവനം: ഈ യൂണിറ്റ് സ്വയം സർവീസ് ചെയ്യാൻ ശ്രമിക്കരുത്. എല്ലാ സർവീസിംഗും യോഗ്യതയുള്ള സർവീസ് ഉദ്യോഗസ്ഥരെ ഏൽപ്പിക്കുക.
- വൃത്തിയാക്കൽ: ഉണങ്ങിയ തുണി ഉപയോഗിച്ച് മാത്രം വൃത്തിയാക്കുക. ലിക്വിഡ് ക്ലീനർ അല്ലെങ്കിൽ എയറോസോൾ ക്ലീനർ ഉപയോഗിക്കരുത്.
- ശ്രവണ സംരക്ഷണം: Prolonged exposure to high volume levels can cause permanent hearing damage. Use headphones at moderate volume levels.
3. സജ്ജീകരണവും കണക്ഷനുകളും
Follow these steps to properly set up your Samson S-phone ampജീവപര്യന്തം:
- അൺപാക്ക് ചെയ്യുന്നു: Carefully unpack the S-phone and inspect it for any signs of damage. Retain the packaging material for future transport or storage.
- പ്ലേസ്മെൻ്റ്: Place the S-phone on a stable, flat surface or mount it in a standard 19-inch equipment rack. Ensure proper ventilation.
- Main Audio Input: Connect your main stereo audio source (e.g., mixer, audio interface) to the പ്രധാന ഇൻപുട്ടുകൾ (L/R) on the rear panel using balanced TRS or unbalanced TS cables.
- സഹായ ഇൻപുട്ടുകൾ: For individual channel mixes, connect auxiliary audio sources to the ഓക്സ് ഇൻ jacks on the front panel for each channel, or the corresponding ഓക്സ് ഇൻ jacks on the rear panel.
- ഹെഡ്ഫോൺ ഔട്ട്പുട്ടുകൾ: ഇതിലേക്ക് ഹെഡ്ഫോണുകൾ ബന്ധിപ്പിക്കുക ഫോണുകൾ outputs. Each channel has one front-panel output and two rear-panel outputs, allowing up to three headphones per channel.
- ലിങ്ക് ഔട്ട്പുട്ട്: If connecting multiple S-phone units, use the U ട്ട്പുട്ട് ലിങ്ക് ചെയ്യുക on the rear panel to send the main stereo signal to another S-phone's main input.
- പവർ കണക്ഷൻ: Connect the supplied AC power cable to the എസി ഇൻ receptacle on the rear panel and then to a suitable power outlet.

ചിത്രം: Front panel of the Samson S-phone, illustrating the layout of master and individual channel controls, including volume, EQ, and headphone jacks.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The S-phone offers comprehensive control over each headphone mix.
4.1. Master Section Controls
- മാസ്റ്റർ വോളിയം: Adjusts the overall output level of the main stereo input to all channels.
- MASTER LEVEL METERS: 8-segment LED meters display the master stereo input level. Aim for levels that illuminate the green LEDs, avoiding the red "CLIP" LED.
- മോണോ/സ്റ്റീരിയോ സ്വിച്ച്: Toggles the main input between stereo and mono operation. In mono, the left and right signals are summed.
4.2. Individual Channel Controls (Channels 1-4)
- CHANNEL LEVEL METERS: 8-segment LED meters display the output level for each individual channel.
- വ്യാപ്തം: Controls the output level for the headphones connected to that specific channel.
- ബാസ്: Adjusts the low-frequency content of the channel's output.
- ട്രെബിൾ: Adjusts the high-frequency content of the channel's output.
- ഓക്സ് ഇൻ: (Front Panel) 1/4-inch input for connecting an auxiliary audio source to be mixed with the main signal for that channel.
- ബാലൻസ്: This control has two functions depending on the ST/2CH switch setting:
- എപ്പോൾ ST/2CH ആയി സജ്ജീകരിച്ചിരിക്കുന്നു ST (Stereo): The BALANCE control adjusts the left-to-right balance of the stereo signal.
- എപ്പോൾ ST/2CH ആയി സജ്ജീകരിച്ചിരിക്കുന്നു 2CH (Two Channel/More Me): The BALANCE control adjusts the mix ratio between the main stereo input and the auxiliary input for that channel. Turning it left favors the main input, turning it right favors the auxiliary input. This is often referred to as the "More Me" function, allowing a performer to hear more of their own instrument or vocal.
- ST/2CH Switch: Selects the mode for the BALANCE control, as described above.
- PHONES Outputs: (Front and Rear Panels) Connect headphones to these 1/4-inch stereo outputs.
5. പരിപാലനം
Proper care will ensure the longevity and optimal performance of your S-phone ampജീവൻ.
- വൃത്തിയാക്കൽ: യൂണിറ്റിന്റെ പുറംഭാഗം വൃത്തിയാക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക. അബ്രസിവ് ക്ലീനറുകൾ, ലായകങ്ങൾ അല്ലെങ്കിൽ മെഴുക് എന്നിവ ഒഴിവാക്കുക.
- സംഭരണം: When not in use for extended periods, store the unit in a cool, dry place, preferably in its original packaging.
- വെൻ്റിലേഷൻ: Regularly check that the ventilation openings are clear of dust and debris.
- കേബിൾ കണക്ഷനുകൾ: Ensure all cables are securely connected and free from damage. Avoid excessive strain on input/output jacks.
6. പ്രശ്നപരിഹാരം
If you encounter issues with your S-phone, refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ശക്തിയില്ല | പവർ കേബിൾ വിച്ഛേദിച്ചു; പവർ ഔട്ട്ലെറ്റ് തകരാറിലായി; യൂണിറ്റ് ഫ്യൂസ് പൊട്ടി. | Check power cable connection; Try a different outlet; Contact qualified service personnel for fuse replacement. |
| ഹെഡ്ഫോണുകളിൽ നിന്ന് ശബ്ദമില്ല | Headphones not connected properly; Channel volume turned down; Master volume turned down; Input source not sending signal; Incorrect BALANCE/ST/2CH setting. | Ensure headphones are fully plugged in; Increase channel and master volumes; Verify input source is active; Adjust BALANCE/ST/2CH settings. |
| വികലമായ ശബ്ദം | Input signal too hot (clipping); Channel volume too high; Faulty headphones or cable. | Reduce input signal level; Lower channel volume; Test with different headphones/cables. Observe LED meters to avoid clipping. |
| Hum or hiss | Ground loop; Poor cable shielding; Nearby electrical interference. | Ensure all equipment is on the same electrical circuit; Use high-quality shielded cables; Move unit away from power transformers or other electronic devices. |
| One side of stereo signal missing | Mono/Stereo switch set to Mono; Faulty input cable; BALANCE control set to one extreme. | Set Master MONO/STEREO switch to STEREO; Check input cables; Adjust BALANCE control to center. |
7 സ്പെസിഫിക്കേഷനുകൾ
Key technical specifications for the Samson S-phone Four Channel Headphone Ampജീവപര്യന്തം:
- ചാനലുകൾ: 4 independent stereo channels
- ഇൻപുട്ടുകൾ: 2 x Main Stereo Inputs (1/4" TRS balanced), 4 x Auxiliary Inputs (1/4" TRS unbalanced)
- ഔട്ട്പുട്ടുകൾ: 12 x Headphone Outputs (1/4" TRS stereo - 3 per channel), 1 x Stereo Link Output (1/4" TRS balanced)
- Controls per Channel: Volume, Bass, Treble, Balance (Main/Aux or L/R), ST/2CH switch
- മാസ്റ്റർ നിയന്ത്രണങ്ങൾ: Master Volume, Mono/Stereo switch
- മീറ്ററിംഗ്: 8-segment LED meters for Master and each Channel
- അളവുകൾ: ഏകദേശം 23.5 x 11 x 4.25 ഇഞ്ച് (59.7 x 27.9 x 10.8 സെ.മീ)
- ഭാരം: ഏകദേശം 7.34 പൗണ്ട് (3.33 കി.ഗ്രാം)
- ശക്തി: എസി (നിർദ്ദിഷ്ട വോളിയംtagഇ പ്രദേശം അനുസരിച്ച് വ്യത്യാസപ്പെടുന്നു)
8. വാറൻ്റിയും പിന്തുണയും
Samson Technologies provides a limited warranty for its products. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Samson webസൈറ്റ്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.
For technical support, service, or replacement parts, please contact Samson customer service. You can find contact information on the official Samson webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ പ്രാദേശിക വിതരണക്കാരൻ വഴി.
ഓൺലൈൻ ഉറവിടങ്ങൾ: For additional information, FAQs, and product registration, visit the official Samson webസൈറ്റ്: www.samsontech.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.