Elkay LK35B

Elkay LK35B 3-1/2" Drain Fitting Instruction Manual

Model: LK35B

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your Elkay LK35B 3-1/2" Drain Fitting. This drain fitting is designed for kitchen sinks and features a durable Type 304 stainless steel body, a strainer basket, and a tailpiece, ensuring long-lasting performance and resistance to corrosion.

2 സുരക്ഷാ വിവരങ്ങൾ

  • ഇൻസ്റ്റാളേഷൻ സമയത്ത് എല്ലായ്പ്പോഴും സുരക്ഷാ ഗ്ലാസുകൾ, കയ്യുറകൾ പോലുള്ള ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (പിപിഇ) ധരിക്കുക.
  • Ensure the water supply to the sink is turned off before beginning installation to prevent leaks.
  • Handle all components carefully to avoid injury or damage to the product.
  • ഏതെങ്കിലും ഘട്ടത്തെക്കുറിച്ച് നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ, യോഗ്യതയുള്ള ഒരു പ്ലംബറെ സമീപിക്കുക.
  • ചെറിയ ഭാഗങ്ങൾ കുട്ടികളിൽ നിന്ന് അകറ്റി നിർത്തുക.

3. പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്ന് ഉറപ്പാക്കുക:

  • 3-1/2" Drain Fitting (Type 304 Stainless Steel Body)
  • സ്‌ട്രെയ്‌നർ ബാസ്‌ക്കറ്റ്
  • ടെയിൽപീസ്
  • മൗണ്ടിംഗ് ഹാർഡ്‌വെയർ (ഗാസ്കറ്റുകൾ, നട്ടുകൾ, വാഷറുകൾ)

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to properly install your Elkay LK35B drain fitting. Basic plumbing tools such as a wrench, plumber's putty, and a screwdriver may be required.

4.1 തയ്യാറാക്കൽ

  1. സിങ്കിലേക്കുള്ള ജലവിതരണം ഓഫാക്കുക.
  2. If replacing an old drain, remove it and clean the sink drain opening thoroughly.
  3. Apply a thin bead of plumber's putty around the underside of the drain fitting's flange.

4.2 ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ

  1. Insert the drain fitting flange into the sink drain opening from the top. Press firmly to create a seal with the plumber's putty.
  2. From underneath the sink, slide the rubber gasket, then the friction washer, and finally the locknut onto the drain fitting's threaded body.
  3. Tighten the locknut by hand, then use a wrench to secure it firmly. Do not overtighten, as this can damage the sink or fitting.
  4. Attach the tailpiece to the bottom of the drain fitting using the provided slip nut and washer. Ensure a tight seal.
  5. Connect the tailpiece to your existing P-trap assembly.
  6. Wipe away any excess plumber's putty from around the drain opening.
Elkay LK35B 3-1/2 inch Drain Fitting components

Figure 1: Elkay LK35B 3-1/2 inch Drain Fitting with its components, including the stainless steel body, strainer basket, and tailpiece, ready for installation.

4.3 പോസ്റ്റ്-ഇൻസ്റ്റലേഷൻ പരിശോധന

  1. Turn on the water supply and fill the sink with water.
  2. Remove the strainer basket and open the drain.
  3. Carefully inspect all connections under the sink for any leaks. Tighten connections as needed.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Elkay LK35B drain fitting is designed for simple operation:

  • സ്‌ട്രൈനർ ബാസ്‌ക്കറ്റ്: Place the strainer basket into the drain opening to catch food particles and debris, preventing clogs in your plumbing.
  • ഡ്രെയിനിംഗ്: To drain water from the sink, simply lift the strainer basket.
  • Stopping Water: The strainer basket can also be pressed down to create a seal, allowing the sink to hold water. Ensure the basket is clean for an effective seal.

6. പരിപാലനം

Regular cleaning and maintenance will ensure the longevity and optimal performance of your drain fitting.

  • പ്രതിദിന ശുചീകരണം: Remove the strainer basket and empty any collected debris. Rinse the basket and the drain opening with warm water.
  • ആഴത്തിലുള്ള വൃത്തിയാക്കൽ: For a more thorough clean, use a mild dish soap and a soft cloth or sponge. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can scratch the stainless steel finish.
  • കറ തടയൽ: Wipe down the drain fitting after use to prevent water spots and mineral buildup, especially in hard water areas.
  • നാശ പ്രതിരോധം: The Type 304 stainless steel is highly resistant to corrosion. However, prolonged exposure to strong acids or bleach should be avoided.

7. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Leakage around the drain flangeImproperly applied plumber's putty or loose locknut.Ensure plumber's putty is evenly applied. Tighten the locknut underneath the sink. If leakage persists, remove, reapply putty, and reinstall.
Leakage at tailpiece connectionLoose slip nut or worn washer.Tighten the slip nut. Replace the washer if it appears worn or damaged.
പതുക്കെ വെള്ളം ഒഴുകിപ്പോകൽStrainer basket clogged with debris or P-trap blockage.Remove and clean the strainer basket. Check the P-trap for blockages and clear if necessary.
Strainer basket does not seal properlyDebris under the basket or worn rubber seal on the basket.Clean the underside of the strainer basket and the drain opening. Replace the strainer basket if the seal is damaged.

8 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
മോഡൽ നമ്പർLK35B
ഡ്രെയിൻ വലിപ്പം3-1/2 ഇഞ്ച്
മെറ്റീരിയൽടൈപ്പ് 304 സ്റ്റെയിൻലെസ്സ് സ്റ്റീൽ
ഘടകങ്ങൾBody, Strainer Basket, Tailpiece
ഇനത്തിൻ്റെ ഭാരം1.04 പൗണ്ട്
ഉൽപ്പന്ന അളവുകൾ4.4 x 4.4 x 7.3 ഇഞ്ച്
പൂർത്തിയാക്കുകസ്റ്റെയിൻലെസ്സ് സ്റ്റീൽ

9. വാറണ്ടിയും പിന്തുണയും

Elkay products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Elkay website. For technical support or assistance, please contact Elkay customer service through their official channels.

Elkay Customer Service: www.elkay.com/us/en/support.html

© 2023 Elkay. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.