1. ആമുഖം
The Steinel IS 130-2 Infrared Motion Detector is designed for reliable and targeted surveillance of areas around your home or property. This versatile sensor is suitable for both indoor and outdoor applications, providing enhanced security and convenience by automatically switching lights or other connected devices.
Key features include a 130° detection angle, a maximum range of 12 meters, and a robust IP54 rating for weather resistance. It supports a maximum switching power of 600W (up to 250W for LED lighting).
Image 1: Steinel IS 130-2 Motion Detector in white, mounted on a wall.
2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ
Please read these safety instructions carefully before installation and operation. Failure to observe these instructions may result in electric shock, fire, or other hazards.
- യോഗ്യതയുള്ള ഇലക്ട്രീഷ്യൻ: Installation must be carried out by a qualified electrician in accordance with national wiring regulations and installation conditions.
- വൈദ്യുതി വിച്ഛേദിക്കൽ: Always disconnect the power supply to the circuit before commencing any installation, maintenance, or repair work.
- വാല്യംtagഇ പരിശോധിക്കുക: വിതരണം വോളിയം ഉറപ്പാക്കുകtage matches the specifications of the device (220-240V, 50/60Hz).
- തുറക്കരുത്: Do not open or modify the device. There are no user-serviceable parts inside.
- ശരിയായ ഗ്രൗണ്ടിംഗ്: Ensure proper grounding is established during installation.
- പരിസ്ഥിതി വ്യവസ്ഥകൾ: Do not install the device in areas with excessive vibration, extreme temperatures, or corrosive atmospheres.
3. പാക്കേജ് ഉള്ളടക്കം
എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ദയവായി പരിശോധിക്കുക:
- 1x Steinel IS 130-2 Infrared Motion Detector
- മൗണ്ടിംഗ് സ്ക്രൂകളും മതിൽ പ്ലഗുകളും
- Detection zone covers (for masking specific areas)
- ഇൻസ്ട്രക്ഷൻ മാനുവൽ
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps for proper installation of your Steinel IS 130-2 Motion Detector:
- മൗണ്ടിംഗ് ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Select a suitable wall location. The ideal mounting height for optimal detection is approximately 2 meters. Avoid mounting near heat sources or objects that might cause false triggers (e.g., moving branches, direct sunlight).
- പവർ വിച്ഛേദിക്കുക: Before drilling or wiring, ensure the main power supply to the installation area is switched off at the circuit breaker.
- ഡ്രില്ലിംഗ് പോയിന്റുകൾ അടയാളപ്പെടുത്തുക: Use the mounting plate of the detector to mark the drilling points on the wall.
- തുളകൾ: Drill holes at the marked points (typically Ø 6mm) and insert the supplied wall plugs.
Image 2: Diagram illustrating the drilling process for mounting the motion detector.
- വയറിംഗ്: Open the clear connection compartment. Connect the power cables (Live, Neutral, Switched Live) according to the wiring diagram provided inside the device. The power cable can be surface-mounted or concealed within the wall.
- Mount the Detector: Secure the detector to the wall using the supplied screws. Ensure it is firmly attached.
- പവർ പുന ore സ്ഥാപിക്കുക: Once installation is complete and all connections are secure, restore power to the circuit.
5. പ്രവർത്തന നിർദ്ദേശങ്ങളും ക്രമീകരണങ്ങളും
The Steinel IS 130-2 offers flexible adjustment options to suit your specific needs. The adjustment controls are located under the sensor head.
5.1. Detection Area and Range
The detector features a 130° detection angle and a maximum range of 12 meters. The multi-lens system can be swiveled 50° horizontally and 90° vertically to precisely adapt the detection zone.
Image 3: Illustration of the 130° detection area and 12m range of the IS 130-2.
To limit the detection zone and prevent unwanted triggers (e.g., from public pathways or neighboring properties), use the supplied detection zone covers. These can be placed over specific segments of the lens.
5.2. Time Setting (Delay Time)
The delay time determines how long the connected light or device remains switched on after the last detected movement. This can be continuously adjusted from 8 seconds to 35 minutes using the rotary knob marked with a clock symbol.
5.3. Twilight Setting (Light Threshold)
The twilight setting determines the ambient light level at which the detector becomes active. This can be continuously adjusted from 2 to 2000 lux using the rotary knob marked with a sun/moon symbol. At a lower lux setting, the detector will only activate in darker conditions. At a higher lux setting, it will activate even in brighter conditions.
ചിത്രം 4: ക്ലോസ്-അപ്പ് view of the time and twilight adjustment knobs located on the sensor head.
6. പരിപാലനം
The Steinel IS 130-2 Motion Detector requires minimal maintenance to ensure optimal performance.
- വൃത്തിയാക്കൽ: Regularly clean the sensor lens with a soft, dry cloth to remove dust, dirt, or cobwebs. Do not use abrasive cleaners or solvents, as these can damage the lens surface.
- പരിശോധന: Periodically check the device for any signs of damage or loose connections.
- ഉപയോക്തൃ-സേവനയോഗ്യമായ ഭാഗങ്ങൾ ഇല്ല: The internal components of the detector are not user-serviceable. If the device malfunctions, contact customer support.
7. പ്രശ്നപരിഹാരം
If your Steinel IS 130-2 Motion Detector is not functioning as expected, refer to the following common issues and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Light does not switch on. | No power supply; Bulb faulty; Twilight setting too high (daylight); Time setting too short; No movement detected. | Check power connection and circuit breaker; Replace bulb; Adjust twilight setting to a lower lux value; Increase time setting; Ensure movement occurs within the detection zone. |
| Light switches on too often. | Detection range too wide; Sensitivity too high; Movement outside desired area (e.g., pets, traffic, wind-blown objects). | Reduce detection range; Adjust sensor head angle; Use detection zone covers to mask unwanted areas; Lower sensitivity if adjustable. |
| വെളിച്ചം തുടർച്ചയായി തുടരുന്നു. | Continuous movement in detection zone; Time setting too long; Device malfunction. | Ensure no constant movement; Reduce time setting; If problem persists, contact customer support. |
| Poor detection. | Sensor lens dirty; Obstruction in detection path; Incorrect mounting height; Temperature difference between ambient and moving object is too small. | Clean sensor lens; Remove obstructions; Verify mounting height (ideal 2m); Consider environmental factors. |
8 സാങ്കേതിക സവിശേഷതകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡൽ നമ്പർ | IS130-2 |
| അളവുകൾ (L x W x H) | 13 x 7.8 x 8.4 സെ.മീ |
| ഭാരം | 160 ഗ്രാം |
| കണ്ടെത്തൽ ആംഗിൾ | 130° |
| പരമാവധി. പരിധി | 12 മീറ്റർ |
| ശുപാർശ ചെയ്യുന്ന മൗണ്ടിംഗ് ഉയരം | 2 മീറ്റർ |
| പരമാവധി. സ്വിച്ചിംഗ് പവർ | 600 W (max. 250 W LED) |
| സമയ ക്രമീകരണം | 8 seconds - 35 minutes (continuously adjustable) |
| Twilight Setting | 2 - 2000 lux (continuously adjustable) |
| IP റേറ്റിംഗ് | IP54 (സ്പ്ലാഷ് പ്രൂഫ്) |
| പവർ ഉറവിടം | AC (220-240V, 50/60Hz) |
| പ്രവർത്തന താപനില | 50 ഡിഗ്രി സെൽഷ്യസ് വരെ |
| അപേക്ഷ | അകത്തും പുറത്തും |
Image 5: Product image of the Steinel IS 130-2 with an overview of its technical specifications.
9. വാറൻ്റി
Steinel provides a manufacturer's warranty for this product. The specific warranty period is 3 വർഷം from the date of purchase. Spare parts are available for a period of 1 വർഷം.
For detailed warranty conditions and to register your product, please visit the official Steinel warranty page: www.steinel.de/garantie
ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.
10. ഉപഭോക്തൃ പിന്തുണ
If you encounter any issues that cannot be resolved using the troubleshooting guide, or if you require further assistance, please contact your retailer or Steinel customer service.
പിന്തുണയുമായി ബന്ധപ്പെടുമ്പോൾ, ദയവായി ഇനിപ്പറയുന്ന വിവരങ്ങൾ തയ്യാറാക്കി വയ്ക്കുക:
- Product Model: IS 130-2
- വാങ്ങിയ തീയതി
- പ്രശ്നത്തിന്റെ വിശദമായ വിവരണം