AUNA 10001807

Auna W1-F-10000 Car Ampലൈഫ്ഫയർ യൂസർ മാന്വൽ

മോഡൽ: 10001807

1. ആമുഖം

Thank you for choosing the Auna W1-F-10000 6-channel car ampലൈഫയർ. ഈ ശക്തമായ amplifier is designed to deliver high-quality audio performance for your vehicle's sound system. Featuring MOSFET technology and Super Bass Boost, it provides a maximum power output of 10,000 watts, ensuring a rich and dynamic audio experience. This manual provides detailed instructions for proper installation, operation, and maintenance to ensure optimal performance and longevity of your ampജീവൻ.

2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ

Please read all safety instructions carefully before installing and operating the amplifier. Failure to follow these instructions may result in injury or damage to the unit or vehicle.

  • Always disconnect the vehicle's battery negative terminal before starting any installation work.
  • ശരിയായ ഗ്രൗണ്ടിംഗ് ഉറപ്പാക്കുക amplifier to the vehicle's chassis.
  • Use appropriate gauge wiring for power, ground, and speaker connections as specified in this manual.
  • മൌണ്ട് ചെയ്യരുത് ampനേരിട്ടുള്ള സൂര്യപ്രകാശം, അമിതമായ ചൂട്, ഈർപ്പം അല്ലെങ്കിൽ പൊടി എന്നിവയ്ക്ക് വിധേയമാകുന്ന പ്രദേശങ്ങളിൽ ലൈഫയർ.
  • മൂർച്ചയുള്ള അരികുകളിൽ നിന്നും ചലിക്കുന്ന ഭാഗങ്ങളിൽ നിന്നും എല്ലാ വയറിംഗും സംരക്ഷിക്കുക.
  • ഒരിക്കലും പ്രവർത്തിപ്പിക്കരുത് amplifier with damaged wiring.
  • Seek professional assistance if you are unsure about any installation or wiring procedures.

3. ഉൽപ്പന്ന സവിശേഷതകൾ

  • 6-channel bridgeable car ampജീവപര്യന്തം
  • പരമാവധി പവർ ഔട്ട്പുട്ട്: 10,000 വാട്ട്സ്
  • MOSFET technology for stable power delivery
  • Adjustable High-Pass Filter (HPF) and Low-Pass Filter (LPF)
  • Super Bass Boost function for enhanced low-frequency response
  • Overload, overheat, and short-circuit protection
  • Robust chassis design for durability
മുകളിൽ view of Auna W1-F-10000 amplifier showing internal circuitry and 10000 Watts branding.

ചിത്രം 3.1: മുകളിൽ view of the Auna W1-F-10000 ampലിഫയർ, ഷോക്asing its internal components through a transparent panel. The image highlights the intricate circuitry, large capacitors, and toroidal transformers, along with the "10000 WATTS" power rating visible on the circuit board. This view emphasizes the amplifier's robust internal design.

4. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ ഉണ്ടോ എന്ന് പരിശോധിക്കുക:

  • Auna W1-F-10000 Car Ampജീവപര്യന്തം
  • മൗണ്ടിംഗ് സ്ക്രൂകൾ
  • ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
  • (Optional: Remote Bass Control Knob, if included with your model)

5. നിയന്ത്രണങ്ങളും കണക്ഷനുകളും

Familiarize yourself with the various inputs, outputs, and controls on your ampഇൻസ്റ്റാളേഷന് മുമ്പ് ലൈഫയർ.

5.1. Rear Panel - Power and Speaker Terminals

പിൻഭാഗം view of Auna W1-F-10000 amplifier showing power, ground, remote, and speaker terminals.

ചിത്രം 5.1: പിൻ പാനൽ amplifier, displaying the power input terminals (+BATT, REM, GND), fuse holders, and six speaker output terminals (CH1-CH6). The speaker terminals are clearly labeled for both positive and negative connections, with bridging options indicated for channels 1-2 and 5-6.

  1. +BATT (Power Input): Connect to the positive terminal of the vehicle's battery via an inline fuse.
  2. REM (റിമോട്ട് ടേൺ-ഓൺ): Connect to the remote output of your head unit.
  3. GND (Ground Input): വാഹനത്തിന്റെ ചേസിസിലെ ഒരു കട്ടിയുള്ള, പെയിന്റ് ചെയ്യാത്ത ലോഹ പോയിന്റുമായി ബന്ധിപ്പിക്കുക.
  4. ഫ്യൂസ്: Integrated fuse holders for protection.
  5. SPEAKER OUT (CH1-CH6): Terminals for connecting speakers. Supports bridged mode for higher power output to subwoofers.

5.2. Rear Panel - Audio Inputs and Controls

പിൻഭാഗം view of Auna W1-F-10000 amplifier showing audio input jacks and control knobs for gain, crossover, and bass boost.

ചിത്രം 5.2: പിൻ പാനൽ amplifier, showing the RCA audio input jacks (AUDIO IN CH1-CH6) and various control knobs. These include Gain controls for each channel pair, High-Pass Filter (HPF) and Low-Pass Filter (LPF) frequency adjustments, and a Super Bass X-OVER control. Indicator lights for Power and Protection are also visible.

  1. POWER/PROTECTION Indicators: LEDs indicating ampജീവിത പദവി.
  2. HPF (ഹൈ-പാസ് ഫിൽട്ടർ): Adjusts the cutoff frequency for high-pass filtering.
  3. ഗെയിൻ: എന്നതിന്റെ ഇൻപുട്ട് സെൻസിറ്റിവിറ്റി ക്രമീകരിക്കുന്നു amplifier to match the output of your head unit.
  4. എൽപിഎഫ് (ലോ-പാസ് ഫിൽട്ടർ): Adjusts the cutoff frequency for low-pass filtering.
  5. ഓഡിയോ ഇൻ (ആർസിഎ): RCA input jacks for connecting to your head unit's pre-outs.
  6. SUPER BASS X-OVER: Control for the Super Bass Boost function.

6. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Proper installation is crucial for optimal performance and safety. It is recommended to have this ampഒരു യോഗ്യതയുള്ള പ്രൊഫഷണലാണ് ലൈഫയർ ഇൻസ്റ്റാൾ ചെയ്തത്.

6.1. മൗണ്ടിംഗ് ലൊക്കേഷൻ

ഇനിപ്പറയുന്ന തരത്തിലുള്ള ഒരു മൗണ്ടിംഗ് സ്ഥലം തിരഞ്ഞെടുക്കുക:

  • അമിതമായി ചൂടാകുന്നത് തടയാൻ നന്നായി വായുസഞ്ചാരമുള്ളത്.
  • Protected from moisture and direct sunlight.
  • Securely fastened to a solid surface.
  • Away from vehicle's electronic control units (ECUs) to prevent interference.

6.2. Wiring Diagram (General)

Below is a general wiring guide. Always refer to your head unit's manual for specific connections.

  1. Power Wire (+BATT): Run a heavy gauge power cable (e.g., 4 AWG or 0 AWG depending on total system power) directly from the positive terminal of the vehicle's battery. Install an inline fuse holder within 18 inches (45 cm) of the battery.
  2. ഗ്രൗണ്ട് വയർ (GND): Use a heavy gauge wire of the same size as the power wire. Connect it to a clean, unpainted metal surface on the vehicle's chassis. Ensure a good electrical connection.
  3. റിമോട്ട് ടേൺ-ഓൺ വയർ (REM): ഒരു ചെറിയ ഗേജ് വയർ (ഉദാ. 18 AWG) ബന്ധിപ്പിക്കുക. ampനിങ്ങളുടെ ഹെഡ് യൂണിറ്റിന്റെ റിമോട്ട് ഔട്ട്‌പുട്ടിലേക്ക് ലിഫയറിന്റെ REM ടെർമിനൽ. ഈ വയർ തിരിയുന്നു ampനിങ്ങളുടെ ഹെഡ് യൂണിറ്റിനൊപ്പം ലിഫയർ ഓണും ഓഫും ആക്കുക.
  4. RCA Audio Cables: Connect RCA cables from your head unit's pre-out jacks to the amplifier's AUDIO IN jacks.
  5. സ്പീക്കർ വയറുകൾ: ഇതിലേക്ക് നിങ്ങളുടെ സ്പീക്കറുകൾ ബന്ധിപ്പിക്കുക amplifier's SPEAKER OUT terminals. Ensure correct polarity (+ to + and - to -). For bridged operation, refer to the specific bridging instructions for channels 1-2 and 5-6.

കുറിപ്പ്: For detailed wiring configurations (e.g., 2-channel, 4-channel, 6-channel, or bridged setups), consult a professional installer or specific car audio resources.

7. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

ഇൻസ്റ്റാൾ ചെയ്തുകഴിഞ്ഞാൽ, നിങ്ങളുടെ പ്രവർത്തനത്തിന് ഈ ഘട്ടങ്ങൾ പാലിക്കുക ampജീവപര്യന്തം:

  1. പ്രാരംഭ പവർ ഓൺ: After all connections are secure, reconnect the vehicle's battery. Turn on your head unit. The amplifier's POWER indicator should illuminate. If the PROTECTION indicator lights up, refer to the Troubleshooting section.
  2. ക്രമീകരണം നേടുക:
    • എല്ലാം സജ്ജമാക്കുക amplifier gain controls to minimum.
    • നിങ്ങളുടെ ഹെഡ് യൂണിറ്റിന്റെ വോളിയം പരമാവധിയുടെ 75% ആയി സജ്ജീകരിക്കുക.
    • പതുക്കെ വർദ്ധിപ്പിക്കുക amplifier's gain control until you hear distortion, then back off slightly until the sound is clear.
  3. Crossover Settings (HPF/LPF):
    • HPF (ഹൈ-പാസ് ഫിൽട്ടർ): Use for full-range speakers or tweeters to block low frequencies. Adjust to prevent distortion at high volumes.
    • എൽപിഎഫ് (ലോ-പാസ് ഫിൽട്ടർ): Use for subwoofers to block high frequencies. Adjust to blend smoothly with your main speakers.
  4. Super Bass Boost: Adjust this control to enhance low-frequency output. Use sparingly to avoid distortion and potential speaker damage.

8. പരിപാലനം

പതിവ് അറ്റകുറ്റപ്പണികൾ നിങ്ങളുടെ ഉപകരണത്തിന്റെ ദീർഘായുസ്സും പ്രകടനവും ഉറപ്പാക്കുന്നു ampജീവൻ.

  • വൃത്തിയാക്കൽ: തുടയ്ക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക ampലിഫയറിന്റെ പുറംഭാഗം. കഠിനമായ രാസവസ്തുക്കളോ അബ്രസീവ് ക്ലീനറുകളോ ഉപയോഗിക്കരുത്.
  • വെൻ്റിലേഷൻ: എന്ന് ഉറപ്പാക്കുക amplifier's cooling fins are free from dust and debris. Periodically check for obstructions around the ampജീവൻ.
  • കണക്ഷനുകൾ: എല്ലാ വയറിംഗ് കണക്ഷനുകളുടെയും ഇറുകിയതും നാശവും ഇടയ്ക്കിടെ പരിശോധിക്കുക. അയഞ്ഞ കണക്ഷനുകൾ മോശം പ്രകടനത്തിനോ കേടുപാടുകൾക്കോ ​​കാരണമാകും.
  • ഫ്യൂസുകൾ: If a fuse blows, replace it only with a fuse of the same type and rating. Never use a higher rated fuse.

9. പ്രശ്‌നപരിഹാരം

നിങ്ങളുടെ ഉപകരണത്തിൽ പ്രശ്നങ്ങൾ അനുഭവപ്പെടുകയാണെങ്കിൽ amplifier, refer to the table below before contacting support.

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
വൈദ്യുതിയില്ല / Ampലൈഫയർ ഓണാക്കുന്നില്ലBlown fuse; Loose power/ground/remote connection; Faulty head unit remote output.Check and replace fuses; Verify all power, ground, and remote wire connections are secure and properly terminated; Test head unit remote output.
Protection LED is onShort circuit in speaker wiring; Overheating; Low voltage; ആന്തരിക തകരാറ്.Check speaker wires for shorts to chassis or between positive/negative; Ensure proper ventilation; Check battery voltage; If problem persists, seek professional service.
സൗണ്ട് ഔട്ട്പുട്ട് ഇല്ലNo input signal; Incorrect gain setting; Muted head unit; Faulty RCA cables; Speaker wires disconnected.Verify head unit is on and playing audio; Adjust gain; Check head unit volume/mute; Test RCA cables; Reconnect speaker wires.
വികലമായ ശബ്ദംഗെയിൻ സെറ്റ് വളരെ കൂടുതലാണ്; തെറ്റായ ക്രോസ്ഓവർ ക്രമീകരണങ്ങൾ; സ്പീക്കർ ഇം‌പെഡൻസ് പൊരുത്തക്കേട്; കേടായ സ്പീക്കറുകൾ.Reduce gain; Adjust HPF/LPF settings; Verify speaker impedance matches amplifier's capabilities; Inspect speakers for damage.

10 സ്പെസിഫിക്കേഷനുകൾ

Technical specifications for the Auna W1-F-10000 Car Ampജീവൻ.

ഫീച്ചർസ്പെസിഫിക്കേഷൻ
മോഡൽ നമ്പർ10001807
ചാനലുകൾ6
പരമാവധി പവർ ഔട്ട്പുട്ട്10,000 വാട്ട്സ്
സാങ്കേതികവിദ്യമോസ്ഫെറ്റ്
ഫിൽട്ടറുകൾAdjustable High-Pass Filter (HPF), Low-Pass Filter (LPF)
ബാസ് ബൂസ്റ്റ്Super Bass Boost
സംരക്ഷണ സവിശേഷതകൾOverload, Overheat, Short-circuit
നിറംകറുപ്പ്

11. വാറൻ്റിയും പിന്തുണയും

Auna products are designed for reliability and performance. For warranty information and technical support, please refer to the official Auna webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ പ്രാദേശിക ഡീലറെ ബന്ധപ്പെടുക.

For further assistance, you may visit the official Auna store: Auna Official Store

© 2024 AUNA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.