ആമുഖം
This manual provides essential information for the safe and effective use, maintenance, and care of your Knipex 83 10 010 90 Degree Pipe Wrench. Please read these instructions thoroughly before operating the tool to ensure proper function and longevity.
ഉൽപ്പന്നം കഴിഞ്ഞുview ഫീച്ചറുകളും
The Knipex 83 10 010 is a robust pipe wrench designed for gripping and turning pipes and fittings. It features a Swedish pattern with 90-degree angled jaws, allowing for efficient work in various positions. The jaws are equipped with offset teeth in opposite directions to provide a secure grip, and the teeth are induction hardened for enhanced durability and wear resistance.
- Swedish Pattern: Optimized design for strong grip.
- 90 Degree Angled Jaws: Facilitates access and leverage in confined spaces.
- Offset Teeth: Ensures a firm, non-slip hold on workpieces.
- Induction Hardened Teeth: Provides long-lasting sharpness and resistance to wear.
- നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Made from Chrome Vanadium Steel for reliability.
ചിത്രം: മുകളിൽ view of the Knipex 83 10 010 pipe wrench, showcasing its overall design and red finish.
ചിത്രം: ആംഗിൾഡ് view of the Knipex 83 10 010 pipe wrench, highlighting the jaw structure.
സജ്ജമാക്കുക
The Knipex 83 10 010 pipe wrench is a hand-operated tool that requires no complex setup. Before first use, and periodically thereafter, inspect the tool for any signs of damage, wear, or loose components. Ensure the jaws move freely and the adjustment mechanism operates smoothly. Clean any manufacturing residues or protective coatings if present.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Follow these steps for safe and effective operation of your pipe wrench:
- സുരക്ഷ ആദ്യം: Always wear appropriate personal protective equipment, including safety glasses and gloves, when using hand tools.
- ശരിയായ വലുപ്പം തിരഞ്ഞെടുക്കുക: Ensure the pipe wrench is appropriately sized for the workpiece. The Knipex 83 10 010 has a maximum jaw capacity of 42 mm.
- Adjust Jaws: Rotate the adjustment nut to open or close the jaws. Position the jaws around the pipe or fitting, ensuring a snug fit. The 90-degree angled jaws are designed to provide maximum contact.
- സുരക്ഷിതമായ പിടി: Apply pressure to the handle to engage the offset teeth firmly onto the workpiece. The teeth are designed to grip in opposite directions for a secure hold.
- ബലം പ്രയോഗിക്കുക: Apply steady, controlled force in the desired direction (tightening or loosening). Avoid excessive force that could damage the workpiece or the tool.
- ആവശ്യമെങ്കിൽ സ്ഥാനമാറ്റം: If the wrench slips or the grip is lost, reposition the jaws and re-engage.
Image: Close-up demonstrating the wrench jaws securely gripping a round pipe.
Image: Detail of the adjustment nut, used to set the jaw opening for different pipe sizes.
Image: The wrench jaws gripping a square workpiece, illustrating versatility.
Image: The wrench jaws gripping a hexagonal workpiece, demonstrating adaptability to various shapes.
മെയിൻ്റനൻസ്
Proper maintenance ensures the longevity and performance of your Knipex pipe wrench:
- വൃത്തിയാക്കൽ: After each use, clean the wrench to remove dirt, grease, and debris. A stiff brush and a clean cloth are usually sufficient.
- ലൂബ്രിക്കേഷൻ: Periodically apply a light coat of machine oil to the pivot points and adjustment mechanism to ensure smooth operation and prevent rust.
- സംഭരണം: Store the wrench in a dry environment to prevent corrosion. Keep it away from corrosive chemicals.
- പരിശോധന: Regularly inspect the jaws for wear or damage. Worn teeth can reduce grip effectiveness. If significant wear is observed, consider replacing the tool.
ട്രബിൾഷൂട്ടിംഗ്
Most issues with a pipe wrench are related to improper use or wear. Here are common scenarios and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| വർക്ക്പീസിൽ റെഞ്ച് തെന്നി വീഴുന്നു | Jaws not properly adjusted; Worn teeth; Workpiece is oily/greasy | Ensure jaws are snug; Inspect teeth for wear; Clean workpiece surface |
| Adjustment mechanism is stiff | Lack of lubrication; Dirt/debris in threads | Clean and lubricate the adjustment nut and threads |
| തുരുമ്പ് രൂപീകരണം | Exposure to moisture; Improper storage | Clean rust with a wire brush, apply rust preventative oil, store in a dry place |
സ്പെസിഫിക്കേഷനുകൾ
| സ്പെസിഫിക്കേഷൻ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | 83 10 010 |
| ബ്രാൻഡ് | നൈപെക്സ് |
| മെറ്റീരിയൽ | ക്രോം വനേഡിയം സ്റ്റീൽ |
| ഇനത്തിൻ്റെ ദൈർഘ്യം | 310 മി.മീ |
| ഇനത്തിൻ്റെ ഭാരം | 1.32 പൗണ്ട് (ഏകദേശം 0.6 കിലോഗ്രാം) |
| Jaw Capacity (Spannweite) | 42 മി.മീ |
| തല ശൈലി | Wrench, 90° Angled Jaws |
| ഫിനിഷ് തരം | പൊടി പൂശി |
| ഓപ്പറേഷൻ മോഡ് | കൈകൊണ്ട് പ്രവർത്തിപ്പിക്കുന്നത് |
| കഷണങ്ങളുടെ എണ്ണം | 1 |
| അളക്കൽ സംവിധാനം | മെട്രിക് |
വാറൻ്റിയും പിന്തുണയും
Knipex tools are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the official Knipex website or contact your authorized Knipex dealer. Keep your purchase receipt as proof of purchase.
For technical support or inquiries, please visit the KNIPEX Store on Amazon or consult the contact information provided with your product packaging.