ആമുഖം
This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your Bounty Hunter LONE Metal Detector. Please read this manual thoroughly before using the device to ensure optimal performance and safety.
Image: The Bounty Hunter LONE Metal Detector, featuring its main unit, adjustable shaft, and 8-inch search coil.
സുരക്ഷാ വിവരങ്ങൾ
- Do not use the metal detector near airports or other sensitive areas where electromagnetic interference could cause issues.
- Keep the device away from power lines to avoid electrical hazards and interference.
- Dispose of used batteries according to local regulations to protect the environment.
- Always exercise caution when digging to avoid underground utilities or hazardous objects.
സജ്ജമാക്കുക
1. അസംബ്ലി
- Attach the search coil to the lower stem using the provided bolt and wing nut. Ensure it is securely fastened but not overtightened.
- Insert the lower stem into the middle stem, adjusting the length to a comfortable operating position.
- Slide the upper stem (with the control housing) onto the middle stem. Secure with the locking collar.
- Wrap the search coil cable around the stem, leaving enough slack for coil movement, and plug the connector into the control housing.
2. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ
- Locate the battery compartment on the control housing.
- കമ്പാർട്ട്മെന്റ് കവർ തുറക്കുക.
- Insert one 9-volt alkaline battery, observing the correct polarity (+/-).
- ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
1. പവർ ഓൺ/ഓഫ്
Press and hold the POWER button to turn the detector on or off. The LCD display will illuminate.
2 ഓപ്പറേറ്റിംഗ് മോഡുകൾ
The Bounty Hunter LONE offers three distinct operating modes:
- ഓൾ-മെറ്റൽ മോഡ്: Detects all types of metal without discrimination. This mode offers the greatest depth detection.
- വിവേചന രീതി: Allows the user to eliminate unwanted metals (e.g., iron trash) from detection. Use the touch pad selection to adjust discrimination levels.
- Auto-Notch Mode: Automatically filters out common trash items while still detecting valuable targets.
3. സംവേദനക്ഷമത നിയന്ത്രണം
Adjust the sensitivity using the dedicated control. Higher sensitivity increases detection depth but may also increase false signals in mineralized ground or areas with electromagnetic interference. Start with a moderate setting and adjust as needed.
4. 3-Tone Audio Discrimination
The detector provides three distinct audio tones to help identify target types:
- താഴ്ന്ന ടോൺ: Typically indicates ferrous metals (iron, steel).
- മീഡിയം ടോൺ: Often indicates small gold items, nickel, or pull tabs.
- ഉയർന്ന ടോൺ: Usually indicates silver, copper, and larger brass items.
5. Search Coil Usage
Sweep the 8-inch waterproof search coil slowly and steadily from side to side, keeping it parallel to the ground and approximately 1-2 inches above the surface. Overlap each sweep by about half the coil's diameter.
6. ഹെഡ്ഫോൺ ജാക്ക്
A 0.25-inch headphone jack is provided for private listening and to better hear subtle target signals, especially in noisy environments.
മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: Wipe down the control housing and stem with a damp cloth after each use. The search coil is waterproof and can be rinsed with fresh water. Do not use abrasive cleaners or solvents.
- സംഭരണം: Store the detector in a cool, dry place when not in use. Remove the 9-volt battery if storing for extended periods to prevent leakage.
- കേബിൾ കെയർ: Avoid sharp bends or kinks in the search coil cable.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| No power or erratic operation | Dead or improperly installed battery. Loose cable connection. | Replace the 9-volt battery, ensuring correct polarity. Check all cable connections for tightness. |
| Constant false signals or chattering | High sensitivity setting. Electromagnetic interference (EMI). Mineralized ground. | Reduce the sensitivity setting. Move away from power lines, cell phones, or other electronic devices. Try adjusting the ground balance if available (note: LONE model may not have manual ground balance, rely on auto-notch/discrimination). |
| മോശം കണ്ടെത്തൽ ആഴം | Low sensitivity setting. Incorrect sweep speed. Discrimination set too high. | Increase sensitivity gradually. Sweep the coil slower and more steadily. Ensure the detector is in All-Metal mode for maximum depth, or adjust discrimination levels. |
| No audio response | Headphones not plugged in correctly or faulty. Volume too low. | Check headphone connection. Ensure volume is at an audible level. Test with different headphones if possible. |
സ്പെസിഫിക്കേഷനുകൾ
- മോഡൽ: ഒറ്റയ്ക്ക്
- ബ്രാൻഡ്: ബൗണ്ടി ഹണ്ടർ
- പ്രവർത്തന ആവൃത്തി: 7.69 KHz
- തിരച്ചിൽ കോയിൽ: 8-inch interchangeable, waterproof
- Detection Depth (Coin-sized objects): 8 ഇഞ്ച് വരെ
- Detection Depth (Larger objects): 3 അടി വരെ
- പ്രവർത്തന രീതികൾ: All-Metal, Discrimination, Auto-Notch
- ഓഡിയോ ടോണുകൾ: 3-Tone Audio Discrimination
- ഡിസ്പ്ലേ: എൽസിഡി
- ഊർജ്ജ സ്രോതസ്സ്: One 9-volt battery (not included)
- ഹെഡ്ഫോൺ ജാക്ക്: 0.25-ഇഞ്ച്
- ക്രമീകരിക്കാവുന്ന ദൈർഘ്യം: അതെ
- ഇനത്തിൻ്റെ ഭാരം: 4.2 പൗണ്ട്
- അന്താരാഷ്ട്ര സംരക്ഷണ റേറ്റിംഗ്: IP54
- UPC: 089723713169
- നിർമ്മാതാവ്: FIRST TEXAS PRODUCTS
വാറൻ്റി
The Bounty Hunter LONE Metal Detector comes with a 5-വർഷ പരിമിത വാറൻ്റി. Please refer to the warranty card included with your product for specific terms, conditions, and registration information. This warranty typically covers defects in materials and workmanship under normal use.
പിന്തുണ
For technical assistance, replacement parts, or further information regarding your Bounty Hunter LONE Metal Detector, please contact the manufacturer, FIRST TEXAS PRODUCTS.
- നിർമ്മാതാവ്: FIRST TEXAS PRODUCTS
- Refer to the product packaging or the official Bounty Hunter website for current contact details and support resources.