MIPRO D5741

MIPRO MB-70 Replacement Rechargeable 12V Battery User Manual

ആമുഖം

This manual provides comprehensive instructions for the safe and effective use, installation, and maintenance of your MIPRO MB-70 Replacement Rechargeable 12V Battery. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

Always observe the following safety precautions to prevent injury or damage to the battery and connected equipment:

  • ചെയ്യരുത് ഷോർട്ട് സർക്യൂട്ട് ബാറ്ററി ടെർമിനലുകൾ.
  • ചെയ്യരുത് expose the battery to extreme temperatures, direct sunlight, or fire.
  • ചെയ്യരുത് ബാറ്ററി വെള്ളത്തിലോ മറ്റ് ദ്രാവകങ്ങളിലോ മുക്കുക.
  • ചെയ്യരുത് attempt to open, disassemble, or modify the battery.
  • ബാറ്ററി കുട്ടികൾക്കും വളർത്തുമൃഗങ്ങൾക്കും ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
  • തീർന്നുപോയ ബാറ്ററികൾ പ്രാദേശിക ചട്ടങ്ങൾക്കനുസരിച്ച് നീക്കം ചെയ്യുക.
  • Use only chargers specified for 12V lead-acid batteries.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The MIPRO MB-70 is a high-quality, rechargeable 12V lead-acid battery designed as a replacement for compatible MIPRO audio equipment and other devices requiring a 12V power source. It provides reliable and consistent power for extended operation.

MIPRO MB-70 Replacement Rechargeable 12V Battery

Image 1: The MIPRO MB-70 Replacement Rechargeable 12V Battery. This image shows the compact, rectangular form factor of the battery, typically black or dark gray, with visible terminals for connection.

ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ

Follow these steps to safely install the MIPRO MB-70 battery into your compatible device:

  1. ഉപകരണം ഓഫാക്കുക: Ensure the device requiring the battery replacement is completely powered off and disconnected from any power sources.
  2. ബാറ്ററി കമ്പാർട്ട്മെന്റ് കണ്ടെത്തുക: Identify and open the battery compartment on your device. Refer to your device's manual for specific instructions.
  3. പഴയ ബാറ്ററി നീക്കം ചെയ്യുക: Carefully disconnect the old battery, noting the polarity (positive and negative terminals). Remove the old battery from the compartment.
  4. പുതിയ ബാറ്ററി ഇടുക: Insert the MIPRO MB-70 battery into the compartment, ensuring the terminals align correctly with the device's connectors. Connect the positive (+) terminal first, then the negative (-) terminal.
  5. സുരക്ഷിത കമ്പാർട്ട്മെന്റ്: ബാറ്ററി കമ്പാർട്ട്മെന്റ് അടച്ച് സുരക്ഷിതമാക്കുക.
  6. പ്രാരംഭ ചാർജ്: It is recommended to fully charge the battery before its first use. Refer to the "Charging the Battery" section.

ബാറ്ററി ചാർജ് ചെയ്യുന്നു

To ensure optimal performance and battery life, follow these charging guidelines:

  • Use a compatible 12V lead-acid battery charger. Using an incorrect charger can damage the battery or pose a safety risk.
  • Connect the charger to the battery terminals, ensuring correct polarity (positive to positive, negative to negative).
  • അനുയോജ്യമായ പവർ ഔട്ട്‌ലെറ്റിലേക്ക് ചാർജർ പ്ലഗ് ചെയ്യുക.
  • Allow the battery to charge until the charger indicates a full charge (refer to your charger's instructions).
  • Avoid overcharging, as this can reduce battery life. Disconnect the charger once the battery is fully charged.
  • നന്നായി വായുസഞ്ചാരമുള്ള സ്ഥലത്ത് ബാറ്ററി ചാർജ് ചെയ്യുക.

Battery Maintenance and Storage

Proper maintenance and storage will extend the life of your MIPRO MB-70 battery:

  • പതിവ് ചാർജിംഗ്: If the battery is not used for extended periods, recharge it every 3-6 months to prevent deep discharge, which can permanently damage lead-acid batteries.
  • ക്ലീൻ ടെർമിനലുകൾ: Keep the battery terminals clean and free of corrosion. Use a dry cloth to wipe them if necessary.
  • സംഭരണ ​​വ്യവസ്ഥകൾ: Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures. The ideal storage temperature is between 20°C and 25°C (68°F and 77°F).
  • ആഴത്തിലുള്ള ഡിസ്ചാർജ് ഒഴിവാക്കുക: Do not allow the battery to completely discharge. Recharge it as soon as possible after use.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ബാറ്ററി ചാർജ് ചെയ്യുന്നില്ലCharger not connected properly; Faulty charger; Deeply discharged battery; Damaged battery.Check charger connections; Try a different charger; Allow extended charging time for deeply discharged batteries (if applicable); Replace battery if damaged.
പൂർണ്ണമായി ചാർജ് ചെയ്തതിനുശേഷം കുറഞ്ഞ പ്രവർത്തന സമയംBattery capacity degradation; Incomplete charge; High power consumption by device.Ensure full charge cycle; Consider battery replacement if capacity is significantly reduced; Check device for abnormal power draw.
ബാറ്ററി ടെർമിനലുകൾ തുരുമ്പെടുത്തുExposure to moisture or improper storage.Clean terminals with a dry cloth or a soft brush. Ensure proper storage conditions.

ഇവിടെ പട്ടികപ്പെടുത്തിയിട്ടില്ലാത്ത പ്രശ്നങ്ങൾ നേരിടുന്നുണ്ടെങ്കിലോ പരിഹാരങ്ങൾ പ്രശ്നം പരിഹരിക്കുന്നില്ലെങ്കിലോ, ദയവായി ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

സ്പെസിഫിക്കേഷനുകൾ

ബ്രാൻഡ്മിപ്രോ
മോഡൽ നമ്പർD5741 (MB-70)
വാല്യംtage12 വോൾട്ട്
ബാറ്ററി സെൽ കോമ്പോസിഷൻലെഡ് ആസിഡ്
ബാറ്ററി ശേഷി4.5 Amp മണിക്കൂറുകൾ
ഇനത്തിൻ്റെ ഭാരം3 പൗണ്ട് (ഏകദേശം 1.36 കിലോഗ്രാം)
യു.പി.സി806593457418
ആദ്യം ലഭ്യമായ തീയതിനവംബർ 14, 2012

വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the documentation provided with your original MIPRO product or visit the official MIPRO webവാറന്റി ക്ലെയിമുകൾക്കുള്ള വാങ്ങലിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

For further assistance, you may contact the seller directly via the platform where the purchase was made.

ഉൽപ്പന്ന വീഡിയോകൾ

ഇപ്പോൾ എംബെഡ് ചെയ്യുന്നതിനായി ഔദ്യോഗിക ഉൽപ്പന്ന വീഡിയോകളൊന്നും ലഭ്യമല്ല.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.