1. ആമുഖം
വാങ്ങിയതിന് നന്ദി.asing the Hello Kitty KT2064 AM/FM Projection Alarm Clock Radio. This device combines a digital alarm clock with an AM/FM radio and a unique projection feature, allowing you to display the time on your ceiling or wall. Please read this manual carefully to ensure proper operation and to fully utilize all features of your new alarm clock radio.
ചിത്രം 1.1: മുൻഭാഗം view of the Hello Kitty KT2064 Projection Alarm Clock Radio, showing the digital display and the Hello Kitty design.
2. സവിശേഷതകൾ
- പ്രൊജക്ഷൻ സവിശേഷത: Projects the time onto your ceiling or wall with adjustable focus and up to 120-degree pivot angle.
- Dual Alarm Options: Wake up to either a buzzer alarm or your favorite radio station.
- AM/FM റേഡിയോ: Integrated radio tuner for listening to broadcast stations.
- സ്നൂസ് പ്രവർത്തനം: Allows for an additional 9 minutes of sleep before the alarm sounds again.
- Sleep to Radio: Set a timer (up to 2 hours) for the radio to play before automatically turning off.
- ബാറ്ററി ബാക്കപ്പ്: വൈദ്യുതി വിതരണ സമയത്ത് സമയവും അലാറം ക്രമീകരണങ്ങളും നിലനിർത്തുന്നു.tages (requires 3 CR2025 button cell batteries, not included).
- LED Time Display: Clear red LED display for current time.
3. പാക്കേജ് ഉള്ളടക്കം
പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ ഉണ്ടോ എന്ന് പരിശോധിക്കുക:
- Hello Kitty KT2064 Projection Alarm Clock Radio Unit
- എസി പവർ അഡാപ്റ്റർ
- ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
Note: 3 CR2025 button cell batteries for backup are not included and must be purchased separately.
4. സജ്ജീകരണം
4.1 പവർ കണക്ഷൻ
- Unpack the alarm clock radio and its accessories.
- Connect the AC power adapter to the DC input jack located on the back of the unit.
- Plug the other end of the AC power adapter into a standard wall outlet. The unit will power on, and the LED display will light up.
4.2 Installing Backup Batteries
Installing backup batteries ensures that your time and alarm settings are retained during a power outage.
- യൂണിറ്റിന്റെ താഴെയോ പിൻഭാഗത്തോ ബാറ്ററി കമ്പാർട്ട്മെന്റ് കണ്ടെത്തുക.
- ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ തുറക്കുക.
- Insert 3 CR2025 button cell batteries, observing the correct polarity (+ and - markings).
- ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.
ചിത്രം 4.2: പിൻഭാഗം view of the alarm clock radio, showing control buttons and potential location for battery compartment.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
5.1 സമയം ക്രമീകരിക്കുന്നു
- അമർത്തിപ്പിടിക്കുക ടൈം സെറ്റ് button (or similar button, refer to unit markings) for approximately 3 seconds until the hour digits begin to flash.
- ഉപയോഗിക്കുക മണിക്കൂർ or + / - മണിക്കൂർ ക്രമീകരിക്കാൻ ബട്ടണുകൾ. AM/PM സൂചകം ശ്രദ്ധിക്കുക.
- അമർത്തുക ടൈം സെറ്റ് വീണ്ടും ബട്ടൺ അമർത്തുക. മിനിറ്റുകണക്കുകൾ മിന്നിമറയും.
- ഉപയോഗിക്കുക മിനിറ്റ് or + / - മിനിറ്റ് ക്രമീകരിക്കാൻ ബട്ടണുകൾ.
- അമർത്തുക ടൈം സെറ്റ് സ്ഥിരീകരിക്കാനും സമയ ക്രമീകരണ മോഡിൽ നിന്ന് പുറത്തുകടക്കാനും ഒരിക്കൽ കൂടി ബട്ടൺ അമർത്തുക.
5.2 Setting the Alarm (Alarm 1 and Alarm 2)
ഈ യൂണിറ്റ് രണ്ട് സ്വതന്ത്ര അലാറങ്ങളെ പിന്തുണയ്ക്കുന്നു.
- അമർത്തിപ്പിടിക്കുക AL1 സെറ്റ് ബട്ടൺ (അലാറം 1-ന്) അല്ലെങ്കിൽ AL2 സെറ്റ് button (for Alarm 2) for approximately 3 seconds until the hour digits of the alarm time begin to flash.
- ഉപയോഗിക്കുക മണിക്കൂർ or + / - അലാറം സമയം ക്രമീകരിക്കാനുള്ള ബട്ടണുകൾ.
- ബന്ധപ്പെട്ടത് അമർത്തുക AL സെറ്റ് വീണ്ടും ബട്ടൺ അമർത്തുക. മിനിറ്റുകണക്കുകൾ മിന്നിമറയും.
- ഉപയോഗിക്കുക മിനിറ്റ് or + / - അലാറം മിനിറ്റ് ക്രമീകരിക്കാനുള്ള ബട്ടണുകൾ.
- അമർത്തുക AL സെറ്റ് അലാറം ഉറവിടം തിരഞ്ഞെടുക്കാൻ വീണ്ടും ബട്ടൺ അമർത്തുക: ബസർ or റേഡിയോ. ഉപയോഗിക്കുക + / - buttons to toggle.
- അമർത്തുക AL സെറ്റ് അലാറം ക്രമീകരണ മോഡ് സ്ഥിരീകരിക്കാനും പുറത്തുകടക്കാനും ഒരിക്കൽ കൂടി ബട്ടൺ അമർത്തുക.
- ഒരു അലാറം സജീവമാക്കാനോ നിർജ്ജീവമാക്കാനോ, അമർത്തുക AL1 ഓൺ/ഓഫ് or AL2 ഓൺ/ഓഫ് button (or similar) repeatedly until the alarm indicator appears/disappears on the display.
5.3 Using the Radio
- അമർത്തുക റേഡിയോ ഓൺ/ഓഫ് റേഡിയോ ഓണാക്കാനുള്ള ബട്ടൺ.
- അമർത്തുക AM/FM AM, FM ബാൻഡുകൾക്കിടയിൽ മാറാൻ ബട്ടൺ.
- ഉപയോഗിക്കുക ട്യൂൺ+ ഒപ്പം ട്യൂൺ- ആവശ്യമുള്ള സ്റ്റേഷനിലേക്ക് സ്വമേധയാ ട്യൂൺ ചെയ്യാനുള്ള ബട്ടണുകൾ.
- For automatic scanning, press and hold ട്യൂൺ+ or ട്യൂൺ- for a few seconds until the radio finds the next clear station.
- ഉപയോഗിച്ച് വോളിയം ക്രമീകരിക്കുക വോളിയം + ഒപ്പം വോളിയം - ബട്ടണുകൾ.
- റേഡിയോ ഓഫ് ചെയ്യാൻ, അമർത്തുക റേഡിയോ ഓൺ/ഓഫ് വീണ്ടും ബട്ടൺ.
5.4 പ്രൊജക്ഷൻ സവിശേഷത
- Locate the projector lens on top of the unit.
- അമർത്തുക പ്രൊജക്ടർ ഓൺ/ഓഫ് button to activate the time projection.
- Adjust the angle of the projector head (up to 120 degrees) to direct the time display onto your ceiling or wall.
- തിരിക്കുക ഫോക്കസ് ring around the projector lens to achieve a clear image.
- To turn off the projection, press the പ്രൊജക്ടർ ഓൺ/ഓഫ് വീണ്ടും ബട്ടൺ.
Image 5.4: The alarm clock radio actively projecting the time and Hello Kitty logo onto a surface.
5.5 സ്നൂസ് ഫംഗ്ഷൻ
അലാറം മുഴങ്ങുമ്പോൾ, വലിയ ബട്ടൺ അമർത്തുക സ്നൂസ് ചെയ്യുക button (usually located on top of the unit). The alarm will pause for approximately 9 minutes and then sound again.
5.6 Sleep to Radio Function
This feature allows you to fall asleep to the radio, which will automatically turn off after a set period.
- Turn on the radio and tune to your desired station.
- അമർത്തുക ഉറങ്ങുക button repeatedly to cycle through the available sleep timer durations (e.g., 120, 90, 60, 30, 15 minutes, or OFF). The selected duration will appear on the display.
- The radio will play for the chosen duration and then automatically turn off.
6. പരിപാലനം
- വൃത്തിയാക്കൽ: മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിച്ച് യൂണിറ്റ് തുടയ്ക്കുക. അബ്രാസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
- വാട്ടർ എക്സ്പോഷർ: യൂണിറ്റ് വെള്ളത്തിൽ നിന്നോ അമിതമായ ഈർപ്പത്തിൽ നിന്നോ അകറ്റി നിർത്തുക.
- താപനില: Avoid exposing the unit to extreme temperatures or direct sunlight.
- ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: Replace backup batteries annually or when the low battery indicator appears to ensure continuous functionality during power outages.
7. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| യൂണിറ്റ് പവർ ഓണാക്കുന്നില്ല. | പവർ അഡാപ്റ്റർ ബന്ധിപ്പിച്ചിട്ടില്ല അല്ലെങ്കിൽ ഔട്ട്ലെറ്റ് തകരാറിലാണ്. | Ensure the power adapter is securely plugged into the unit and a working wall outlet. Test the outlet with another device. |
| Time/alarm settings are lost after power outage. | ബാക്കപ്പ് ബാറ്ററികൾ തീർന്നിരിക്കുന്നു അല്ലെങ്കിൽ ഇൻസ്റ്റാൾ ചെയ്തിട്ടില്ല. | Install new CR2025 button cell batteries or replace existing ones. |
| പ്രൊജക്ഷൻ മങ്ങിയതാണ്. | ഫോക്കസ് ശരിയായി ക്രമീകരിച്ചിട്ടില്ല. | തിരിക്കുക ഫോക്കസ് ring around the projector lens until the image is clear. |
| റേഡിയോ സ്വീകരണം മോശമാണ്. | ആന്റിന നീട്ടിയിട്ടില്ല അല്ലെങ്കിൽ ഇടപെടുന്നില്ല. | Extend the FM wire antenna fully. For AM, try repositioning the unit. Avoid placing near electronic devices that may cause interference. |
| അലാറം മുഴങ്ങുന്നില്ല. | അലാറം സജീവമാക്കിയിട്ടില്ല അല്ലെങ്കിൽ തെറ്റായി സജ്ജീകരിച്ചിട്ടില്ല. | Ensure the alarm is set and activated (alarm indicator visible). Check alarm volume if set to radio. |
8 സ്പെസിഫിക്കേഷനുകൾ
| ബ്രാൻഡ് | ഹലോ കിറ്റി |
| മോഡൽ നമ്പർ | KT2064P |
| ഡിസ്പ്ലേ തരം | ഡിജിറ്റൽ LED |
| പവർ ഉറവിടം | എസി പവർ അഡാപ്റ്റർ |
| ബാക്കപ്പ് ബാറ്ററി | 3 x CR2025 Button Cell (not included) |
| റേഡിയോ ആവൃത്തി | AM/FM (FM up to 108 MHz) |
| ഉൽപ്പന്ന അളവുകൾ (L x W x H) | 14.5 x 11.9 x 17.3 സെ.മീ (ഏകദേശം 5.7 x 4.7 x 6.8 ഇഞ്ച്) |
| ഉൽപ്പന്ന ഭാരം | 885 ഗ്രാം (ഏകദേശം 1.95 പൗണ്ട്) |
| പ്രൊജക്ഷൻ ആംഗിൾ | 120 ഡിഗ്രി വരെ |
| സ്നൂസ് ദൈർഘ്യം | 9 മിനിറ്റ് |
| സ്ലീപ്പ് ടൈമർ | 2 മണിക്കൂർ വരെ |
Image 8.1: Dimensions of the Hello Kitty KT2064 Projection Alarm Clock Radio.
9. വാറൻ്റിയും പിന്തുണയും
This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided at the time of purchase or contact your retailer. If you encounter any issues not covered in the troubleshooting section, please contact customer support for assistance.
For support inquiries, please visit the official Hello Kitty product support webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ പ്രാദേശിക വിതരണക്കാരനെ ബന്ധപ്പെടുക.
