InFocus LP425z

InFocus LP425z DLP Projector User Manual

Model: LP425z

1. ആമുഖം

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your InFocus LP425z DLP Projector. Please read this manual thoroughly before using the projector to ensure proper operation and to maximize its lifespan.

2 സുരക്ഷാ വിവരങ്ങൾ

Observe all warnings and instructions marked on the projector and in this manual. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltagഇ അല്ലെങ്കിൽ മറ്റ് അപകടങ്ങൾ. എല്ലാ സേവനങ്ങളും യോഗ്യതയുള്ള സേവന ഉദ്യോഗസ്ഥർക്ക് റഫർ ചെയ്യുക.

  • വെന്റിലേഷൻ തുറക്കൽ തടയരുത്.
  • അസ്ഥിരമായ വണ്ടിയിലോ സ്റ്റാൻഡിലോ മേശയിലോ പ്രൊജക്ടർ സ്ഥാപിക്കരുത്.
  • l ചെയ്യുമ്പോൾ പ്രൊജക്ടർ ലെൻസിലേക്ക് നേരിട്ട് നോക്കരുത്amp ഓണാണ്.
  • വൃത്തിയാക്കുന്നതിന് മുമ്പ് പവർ കോർഡ് വിച്ഛേദിക്കുക.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

ഫ്രണ്ട് view of the InFocus LP425z projector

ചിത്രം 1: ഫ്രണ്ട് view of the InFocus LP425z projector, showing the lens and front ventilation grille.

The InFocus LP425z is a portable DLP projector designed for various applications, including home cinema and presentations. It features 900 ANSI lumens brightness and a 400:1 contrast ratio, delivering clear images with an 800x600 native resolution.

4. സജ്ജീകരണം

4.1 അൺപാക്കിംഗ്

പ്രൊജക്ടറും എല്ലാ അനുബന്ധ ഉപകരണങ്ങളും പാക്കേജിംഗിൽ നിന്ന് ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക. എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്ന് ഉറപ്പാക്കുക:

  • InFocus LP425z Projector
  • പവർ കോർഡ്
  • റിമോട്ട് കൺട്രോൾ (ഉൾപ്പെടുത്തിയാൽ)
  • VGA Cable (if included)

4.2 പ്ലേസ്മെൻ്റ്

Position the projector on a stable, flat surface. Ensure adequate ventilation around the unit. The projector can display images from 28.9 to 227.3 inches diagonally, with a throw distance ranging from 5.0 to 30.0 feet. Adjust the projector's distance from the screen to achieve the desired image size.

4.3 ഉപകരണങ്ങൾ ബന്ധിപ്പിക്കുന്നു

The LP425z offers various input options for connecting to your source devices.

പിൻഭാഗം view of the InFocus LP425z projector showing input ports

ചിത്രം 2: Rear panel of the InFocus LP425z, displaying various input ports including composite video and VGA.

  • വീഡിയോ ഇൻപുട്ട്: Connect a video source (e.g., DVD player, VCR) to the composite video (RCA) inputs.
  • Computer Input: Connect a computer to the VGA input port.
  • ഓഡിയോ ഇൻപുട്ട്: Connect audio cables to the corresponding audio input jacks if your source device provides separate audio.

4.4 പവർ കണക്ഷൻ

വശം view of the InFocus LP425z projector showing the power input

ചിത്രം 3: Side panel of the InFocus LP425z, showing the power input socket and main power switch.

Connect the power cord to the projector's power input socket and then plug the other end into a grounded electrical outlet. Ensure the main power switch (located near the power input) is in the 'Off' (O) position before connecting.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 പവർ ഓൺ/ഓഫ്

  1. എല്ലാ കേബിളുകളും സുരക്ഷിതമായി ബന്ധിപ്പിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  2. Flip the main power switch (Figure 3) to the 'On' (I) position.
  3. അമർത്തുക ശക്തി button on the projector's control panel or remote control. The power indicator light will illuminate.
  4. പവർ ഓഫ് ചെയ്യാൻ, അമർത്തുക ശക്തി button again. The projector will enter a cool-down cycle before fully shutting down. Do not unplug the projector during the cool-down cycle.

5.2 നിയന്ത്രണ പാനൽ ഉപയോഗിക്കുന്നു

മുകളിൽ view of the InFocus LP425z projector showing the control panel

ചിത്രം 4: Top panel of the InFocus LP425z, featuring the control buttons for navigation, volume, and power.

The control panel on top of the projector (Figure 4) allows you to manage various settings:

  • പവർ ബട്ടൺ: പ്രൊജക്ടർ ഓണാക്കുകയോ ഓഫാക്കുകയോ ചെയ്യുന്നു.
  • മെനു ബട്ടൺ: ഓൺ-സ്ക്രീൻ ഡിസ്പ്ലേ (OSD) മെനു ആക്‌സസ് ചെയ്യുന്നു.
  • നാവിഗേഷൻ ബട്ടണുകൾ (മുകളിലേക്ക്/താഴേക്ക്/ഇടത്/വലത്): മെനു ഓപ്ഷനുകളിലൂടെ നാവിഗേറ്റ് ചെയ്യാനും ക്രമീകരണങ്ങൾ ക്രമീകരിക്കാനും ഉപയോഗിക്കുന്നു.
  • ബട്ടൺ തിരഞ്ഞെടുക്കുക/നൽകുക: Confirms selections in the OSD menu.
  • വോളിയം +/-: ഓഡിയോ ഔട്ട്പുട്ട് ലെവൽ ക്രമീകരിക്കുന്നു.
  • ഉറവിടം/ഇൻപുട്ട് ബട്ടൺ: ലഭ്യമായ ഇൻപുട്ട് ഉറവിടങ്ങളിലൂടെ സൈക്കിൾ ചെയ്യുന്നു.

5.3 ഫോക്കസും സൂമും ക്രമീകരിക്കൽ

The InFocus LP425z features manual focus and zoom controls. These are typically rings located around the projector lens (Figure 1).

  • ഫോക്കസ്: Rotate the focus ring until the image appears sharp and clear on the screen.
  • സൂം: Rotate the zoom ring to adjust the size of the projected image without moving the projector. The zoom ratio is 1.30:1.

6. പരിപാലനം

6.1 എൽamp മാറ്റിസ്ഥാപിക്കൽ

The projector uses a 270W Metal Halide lamp with an estimated life of 1000 hours. When the lamp life is nearing its end, a warning message may appear, or the image brightness may significantly decrease. Refer to the label on the bottom of the projector for specific lamp replacement instructions (Figure 5).

താഴെ view of the InFocus LP425z projector showing product label and lamp പ്രവേശനം

ചിത്രം 5: Bottom panel of the InFocus LP425z, showing the product label with model information and lamp access instructions.

Warning: To replace the lamp, ensure the projector is unplugged and has cooled down completely. High pressure lamp can explode if handled improperly. Refer to qualified service personnel if unsure.

6.2 വൃത്തിയാക്കൽ

  • പ്രൊജക്ടർ സിasing: മൃദുവായ, ലിന്റ് രഹിത തുണി ഉപയോഗിക്കുകampened with a mild, non-abrasive cleaner. Do not use harsh chemicals.
  • ലെൻസ്: Use a lens cleaning cloth and lens cleaning solution specifically designed for optical surfaces. Avoid touching the lens with your fingers.
  • വെന്റിലേഷൻ ഓപ്പണിംഗുകൾ: Periodically check and clean the ventilation openings to prevent dust buildup, which can lead to overheating. Use a soft brush or compressed air.

7. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with your InFocus LP425z projector.

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
സ്ക്രീനിൽ ചിത്രമൊന്നുമില്ല
  • പവർ കോർഡ് ബന്ധിപ്പിച്ചിട്ടില്ല
  • പ്രൊജക്ടർ ഓൺ ചെയ്തിട്ടില്ല
  • തെറ്റായ ഇൻപുട്ട് ഉറവിടം തിരഞ്ഞെടുത്തു
  • Source device not sending signal
  • വൈദ്യുതി കണക്ഷനുകൾ പരിശോധിക്കുക.
  • പവർ ബട്ടൺ അമർത്തുക.
  • Press the Source button to cycle inputs.
  • Ensure source device is on and outputting video.
Dim or faded image
  • Lamp ജീവിതാവസാനത്തോട് അടുക്കുന്നു
  • ഇക്കോ മോഡ് പ്രവർത്തനക്ഷമമാക്കി
  • ലെൻസ് വൃത്തികെട്ടതാണ്
  • എൽ മാറ്റിസ്ഥാപിക്കുന്നത് പരിഗണിക്കുകamp.
  • Check OSD menu for brightness settings.
  • പ്രൊജക്ടർ ലെൻസ് വൃത്തിയാക്കുക.
ഫോക്കസ് ചെയ്യാത്ത ചിത്രം
  • ഫോക്കസ് റിംഗ് ക്രമീകരിച്ചിട്ടില്ല
  • Adjust the manual focus ring on the lens.

If the problem persists after attempting these solutions, please contact InFocus customer support or a qualified service technician.

8 സ്പെസിഫിക്കേഷനുകൾ

മോഡൽLP425z
ഡിസ്പ്ലേ തരം0.9" DLP (1)
നേറ്റീവ് റെസല്യൂഷൻ800x600 (SVGA)
പരമാവധി മിഴിവ്1024x768
തെളിച്ചം900 ആൻസി ലുമെൻസ്
കോൺട്രാസ്റ്റ് റേഷ്യോ400:1
വീക്ഷണാനുപാതം4:3
പ്രകാശ സ്രോതസ്സ്270W Metal Halide Lamp
Lamp ജീവിതം1000 മണിക്കൂർ
ലെൻസ്Manual Focus, Manual Zoom (1.30:1)
ദൂരം എറിയുക5.0 - 30.0 അടി
ചിത്രത്തിൻ്റെ വലുപ്പം28.9 - 227.3 inches (diagonal)
കണക്റ്റിവിറ്റിComponent Video, Computer (VGA)
സ്പീക്കറുകൾ2.5 W Mono
വൈദ്യുതി ഉപഭോഗംപരമാവധി 400W
വാല്യംtage100വി - 240വി
അളവുകൾ (HxWxD)3.9 x 9.0 x 12.0 ഇഞ്ച്
ഭാരം7.4 പൗണ്ട്

9. വാറൻ്റിയും പിന്തുണയും

9.1 വാറൻ്റി വിവരങ്ങൾ

The InFocus LP425z projector comes with a 2 വർഷത്തെ വാറൻ്റി വാങ്ങിയ തീയതി മുതൽ. സാധാരണ ഉപയോഗത്തിലുള്ള മെറ്റീരിയലുകളിലെയും ജോലികളിലെയും വൈകല്യങ്ങൾ ഈ വാറന്റി ഉൾക്കൊള്ളുന്നു. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.

9.2 ഉപഭോക്തൃ പിന്തുണ

For technical assistance, service, or warranty inquiries, please contact InFocus customer support. Visit the official InFocus webഏറ്റവും പുതിയ കോൺടാക്റ്റ് വിവരങ്ങൾക്കും പിന്തുണാ ഉറവിടങ്ങൾക്കുമുള്ള സൈറ്റ്.

Manufacturer: In Focus

© 2023 InFocus. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.