1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The Johnson Controls TE-6100-2 Series Nickel Temperature Sensing Element is designed for a wide variety of temperature sensing applications. This unit features a nickel sensor element, providing specific resistance ranges suitable for various control systems. It is often used in HVAC systems as an accessory for thermostats.
പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:
- Nickel Sensor Element: Provides specific resistance ranges for diverse applications.
- Conduit Box Design: Facilitates secure and protected wiring connections.
- Averaging Capability: Designed for 8-foot averaging temperature sensing.
Figure 1: Johnson Controls TE-6100-2 Nickel Temperature Sensing Element. This image shows the metallic conduit box with an attached label indicating "TE-6100-2 AVERAGING TEMP. SENSOR 1000 OHM-8 FOOT" and several copper wires extending from the top, coiled for an 8-foot averaging length.
2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Proper installation is crucial for accurate temperature sensing. This device is intended for use by qualified personnel.
2.1 സുരക്ഷാ മുൻകരുതലുകൾ
- Disconnect all power to the system before installation to prevent electrical shock or equipment damage.
- പ്രാദേശികവും ദേശീയവുമായ എല്ലാ ഇലക്ട്രിക്കൽ കോഡുകളും പിന്തുടരുക.
- Ensure proper grounding of the conduit box if required by local codes.
2.2 മൗണ്ടിംഗ്
The TE-6100-2 can be mounted using various optional mounting assemblies, such as brackets or wall plates, depending on the application requirements. Secure the conduit box firmly to a stable surface in the desired sensing location.
2.3 വയറിംഗ്
Connect the sensor wires to the appropriate terminals on your control system or thermostat. Refer to the wiring diagram provided with your specific control system for correct connections. The nickel sensor element provides a 1000 ohm resistance at a reference temperature (typically 70°F or 21°C).
- എല്ലാ കണക്ഷനുകളും സുരക്ഷിതവും ഇൻസുലേറ്റ് ചെയ്തതുമാണെന്ന് ഉറപ്പാക്കുക.
- Avoid routing sensor wires near sources of electromagnetic interference.
3. ഓപ്പറേഷൻ
The TE-6100-2 functions by changing its electrical resistance in response to temperature variations. This resistance change is then interpreted by a compatible control system (e.g., a thermostat or building management system) to regulate heating, ventilation, or air conditioning.
- The sensor provides an 8-foot averaging temperature measurement, meaning it senses the average temperature along its 8-foot length.
- The 1000 ohm nickel element offers specific resistance characteristics that must be matched with the input requirements of the connected controller.
Once installed and wired correctly, the sensor continuously provides temperature data to the connected control system without requiring user interaction.
4. പരിപാലനം
The Johnson Controls TE-6100-2 is designed for reliable, long-term operation with minimal maintenance. Regular inspection can help ensure optimal performance.
- ആനുകാലിക പരിശോധന: Annually inspect the sensor and its wiring for any signs of physical damage, corrosion, or loose connections.
- വൃത്തിയാക്കൽ: If the conduit box or sensor wires accumulate dust or debris, gently clean them with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- പരിസ്ഥിതി വ്യവസ്ഥകൾ: Ensure the sensor remains within its specified operating environmental conditions to prevent premature failure.
5. പ്രശ്നപരിഹാരം
If the temperature sensing system is not functioning as expected, consider the following troubleshooting steps:
- വായന ഇല്ല അല്ലെങ്കിൽ തെറ്റായ വായന:
- Verify that power is supplied to the control system.
- എല്ലാ വയറിംഗ് കണക്ഷനുകളുടെയും ഇറുകിയതും ശരിയായ പോളാരിറ്റിയും പരിശോധിക്കുക.
- Inspect the sensor wires for any breaks or damage.
- Ensure the sensor type (nickel 1000 ohm) is correctly configured in the connected control system.
- ഇടയ്ക്കിടെയുള്ള വായനകൾ:
- അയഞ്ഞ വയറിംഗ് കണക്ഷനുകൾ പരിശോധിക്കുക.
- Investigate potential sources of electromagnetic interference near the sensor wiring.
- സെൻസർ കേടുപാടുകൾ: If the sensor or its wires are physically damaged, replacement may be necessary.
If issues persist after performing these checks, consult a qualified HVAC technician or contact Johnson Controls technical support.
6 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡൽ നമ്പർ | TE-6100-2 |
| സെൻസർ തരം | Nickel Temperature Sensing Element |
| പ്രതിരോധം | 1000 ohms (+/-1%) |
| Averaging Length | 8 അടി |
| ഉൽപ്പന്ന അളവുകൾ | 11.5 x 9 x 3 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 1.15 പൗണ്ട് |
| നിർമ്മാതാവ് | Johnson Controls Inc |
7. വാറൻ്റി വിവരങ്ങൾ
Specific warranty details for the Johnson Controls TE-6100-2 are typically provided at the point of purchase or can be found in the official product documentation from Johnson Controls. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Johnson Controls webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി ബന്ധപ്പെടുക.
8. ഉപഭോക്തൃ പിന്തുണ
For technical assistance, product inquiries, or support, please contact Johnson Controls directly. Their official website usually provides contact information for customer service and technical support departments.
- Visit the official Johnson Controls website for the latest support resources.
- Have your product model number (TE-6100-2) and any relevant system information ready when contacting support.
