HERTZ DS-303
HERTZ Dieci Series DS-303 12-inch Subwoofer Instruction Manual
മോഡൽ: DS-303
ആമുഖം
Thank you for choosing the HERTZ Dieci Series DS-303 Subwoofer. This manual provides essential information for the proper installation, operation, and maintenance of your subwoofer. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.
The HERTZ Dieci Series DS-303 is a 12-inch (300mm) car audio subwoofer designed for high efficiency and exceptional power handling. It features a polypropylene membrane and butyl rubber surround for high excursion with minimal distortion. An efficient cooling system ensures optimal heat dissipation. This subwoofer is suitable for use in compact sealed or reflex enclosures.
സുരക്ഷാ വിവരങ്ങൾ
ഇനിപ്പറയുന്ന സുരക്ഷാ മുൻകരുതലുകൾ എപ്പോഴും നിരീക്ഷിക്കുക:
- Disconnect the vehicle's battery negative terminal before starting any installation work to prevent electrical shorts.
- വൈബ്രേഷനിൽ നിന്നോ മൂർച്ചയുള്ള അരികുകളിൽ നിന്നോ കേടുപാടുകൾ സംഭവിക്കുന്നത് തടയാൻ എല്ലാ വയറിംഗും ശരിയായി ഇൻസുലേറ്റ് ചെയ്തിട്ടുണ്ടെന്നും സുരക്ഷിതമാണെന്നും ഉറപ്പാക്കുക.
- ഡ്രൈവറുടെ വരികൾക്ക് തടസ്സമാകുന്ന സ്ഥലങ്ങളിൽ സബ് വൂഫർ സ്ഥാപിക്കരുത്. view അല്ലെങ്കിൽ വാഹന സുരക്ഷാ സംവിധാനങ്ങളിൽ (ഉദാ: എയർബാഗുകൾ) ഇടപെടുക.
- സബ് വൂഫറിന്റെ പവർ ആവശ്യകതകൾ കൈകാര്യം ചെയ്യുന്നതിന് പവർ, സ്പീക്കർ കണക്ഷനുകൾക്ക് ഉചിതമായ ഗേജ് വയറിംഗ് ഉപയോഗിക്കുക.
- Avoid exposing the subwoofer to excessive moisture or direct sunlight.
- ഇൻസ്റ്റലേഷൻ പ്രക്രിയയുടെ ഏതെങ്കിലും ഭാഗത്തെക്കുറിച്ച് നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ ഒരു പ്രൊഫഷണൽ ഇൻസ്റ്റാളറെ സമീപിക്കുക.
ബോക്സിൽ എന്താണുള്ളത്
പായ്ക്ക് അൺപാക്ക് ചെയ്യുമ്പോൾ, എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- HERTZ Dieci Series DS-303 Subwoofer
- നിർദ്ദേശ മാനുവൽ (ഈ പ്രമാണം)
- Mounting Screws (if included by manufacturer)
Note: Additional accessories such as speaker wire, amplifier, and enclosure are sold separately.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Proper installation is crucial for optimal performance. This section outlines general guidelines. Specific enclosure design and wiring diagrams may vary based on your vehicle and ampലൈഫയർ സജ്ജീകരണം.
1. എൻക്ലോഷർ തിരഞ്ഞെടുപ്പും തയ്യാറാക്കലും
The DS-303 subwoofer is designed for use in compact sealed or reflex (vented) enclosures. Refer to the subwoofer's specifications for recommended enclosure volumes.

ചിത്രം: പിൻഭാഗം view of the HERTZ Dieci Series DS-303 Subwoofer, displaying the magnet structure and wiring terminals.
- Ensure the enclosure is robust and free from air leaks.
- Cut a circular opening in the enclosure baffle that matches the subwoofer's mounting diameter.
- Pre-drill pilot holes for the mounting screws to prevent damage to the enclosure or subwoofer frame.
2. വയറിംഗ് കണക്ഷനുകൾ
The DS-303 features a 4-Ohm Single Voice Coil (SVC). Connect the subwoofer to a compatible ampജീവിത outputട്ട്പുട്ട്.

ചിത്രം: മുൻഭാഗം view of the HERTZ Dieci Series DS-303 Subwoofer, highlighting the polypropylene cone.
- സബ് വൂഫറിന്റെ പോസിറ്റീവ് (+) ടെർമിനൽ പോസിറ്റീവ് (+) ടെർമിനലുമായി ബന്ധിപ്പിക്കുക ampലിഫയറിന്റെ സബ് വൂഫർ ഔട്ട്പുട്ട്.
- സബ് വൂഫറിന്റെ നെഗറ്റീവ് (-) ടെർമിനൽ നെഗറ്റീവ് (-) ടെർമിനലുമായി ബന്ധിപ്പിക്കുക ampലിഫയറിന്റെ സബ് വൂഫർ ഔട്ട്പുട്ട്.
- എല്ലാ കണക്ഷനുകളും സുരക്ഷിതമാണെന്നും ഷോർട്ട് സർക്യൂട്ടുകൾ ഇല്ലാത്തതാണെന്നും ഉറപ്പാക്കുക.
- Use appropriate gauge speaker wire for the power handling of the subwoofer and the distance to the ampജീവൻ.
3. സബ് വൂഫർ ഘടിപ്പിക്കൽ

ചിത്രം: ആംഗിൾഡ് view of the HERTZ Dieci Series DS-303 Subwoofer, showing the robust frame and mounting holes.
- Carefully place the subwoofer into the prepared opening in the enclosure.
- Align the mounting holes on the subwoofer frame with the pre-drilled holes in the enclosure.
- Secure the subwoofer using the provided mounting screws. Tighten screws evenly in a crisscross pattern to ensure a tight, even seal. Do not overtighten.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once installed, follow these steps to operate your HERTZ DS-303 Subwoofer:
- പ്രാരംഭ പവർ-അപ്പ്: After all connections are made and verified, reconnect the vehicle's battery. Turn on your car audio system.
- Ampലൈഫയർ ക്രമീകരണങ്ങൾ: നിങ്ങളുടെ ഗെയിൻ, ക്രോസ്ഓവർ ഫ്രീക്വൻസി, ഫേസ് ക്രമീകരണങ്ങൾ എന്നിവ ക്രമീകരിക്കുക amplifier according to your system's requirements and personal preference. Start with low gain and gradually increase.
- ബ്രേക്ക്-ഇൻ കാലയളവ്: Allow a break-in period of approximately 10-20 hours of normal listening at moderate volumes. This allows the subwoofer's suspension components to loosen and achieve optimal performance.
- വോളിയം നിയന്ത്രണം: Avoid operating the subwoofer at excessively high volumes for extended periods, as this can lead to overheating and damage. If you hear distortion, reduce the volume immediately.
മെയിൻ്റനൻസ്
The HERTZ DS-303 Subwoofer requires minimal maintenance to ensure long-lasting performance:
- വൃത്തിയാക്കൽ: കോൺ വൃത്തിയാക്കുന്നതിനും വൃത്തിയാക്കുന്നതിനും മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക. കഠിനമായ രാസവസ്തുക്കളോ അബ്രാസീവ് ക്ലീനറുകളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
- പരിശോധന: കോൺ, ചുറ്റുപാട് അല്ലെങ്കിൽ പൊടി തൊപ്പി എന്നിവയ്ക്ക് കേടുപാടുകൾ സംഭവിച്ചിട്ടുണ്ടോ എന്ന് ഇടയ്ക്കിടെ സബ് വൂഫർ പരിശോധിക്കുക. വയറിംഗ് കണക്ഷനുകളുടെ ഇറുകിയതാണോ അതോ നാശനമാണോ എന്ന് പരിശോധിക്കുക.
- പരിസ്ഥിതി സംരക്ഷണം: Keep the subwoofer free from dust, debris, and extreme temperatures.
ട്രബിൾഷൂട്ടിംഗ്
നിങ്ങളുടെ സബ് വൂഫറിൽ പ്രശ്നങ്ങൾ അനുഭവപ്പെടുകയാണെങ്കിൽ, ഇനിപ്പറയുന്ന പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും പരിശോധിക്കുക:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| സബ് വൂഫറിൽ നിന്ന് ശബ്ദമില്ല |
|
|
| വികലമായ അല്ലെങ്കിൽ വ്യക്തമല്ലാത്ത ബാസ് |
|
|
| Subwoofer gets hot |
|
|
If the problem persists after trying these solutions, contact HERTZ customer support or a qualified car audio technician.
സാങ്കേതിക സവിശേഷതകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡൽ | ഡിഎസ്-ക്സനുമ്ക്സ |
| വലിപ്പം | 300 എംഎം (12 ഇഞ്ച്) |
| പവർ ഹാൻഡ്ലിംഗ് (പീക്ക്) | 1000 W |
| Power Handling (Continuous RMS) | 250 W |
| പ്രതിരോധം | 4 Ω (Ohm) |
| ഫ്രീക്വൻസി പ്രതികരണം | 28 • 300 Hz |
| സംവേദനക്ഷമത | 91 ഡിബി എസ്പിഎൽ |
| വോയ്സ് കോയിൽ വ്യാസം | 38 എംഎം (1.5 ഇഞ്ച്) |
| മാഗ്നറ്റ് മെറ്റീരിയൽ | ഉയർന്ന സാന്ദ്രത ഫ്ലക്സ് ഫെറൈറ്റ് |
| കോൺ മെറ്റീരിയൽ | Polypropylene with Mica injection |
| ചുറ്റുമുള്ള മെറ്റീരിയൽ | ബ്യൂട്ടൈൽ റബ്ബർ |
| എക്സ്മാക്സ് (പരമാവധി ലീനിയർ എക്സ്കർഷൻ) | 9 മി.മീ |
| ഇനത്തിൻ്റെ ഭാരം | 8.8 പൗണ്ട് (4 കി.ഗ്രാം) |
| കണക്റ്റിവിറ്റി ടെക്നോളജി | വയർഡ് |
| നിർമ്മാതാവ് | Electtromedia |
വാറൻ്റി വിവരങ്ങൾ
The HERTZ Dieci Series DS-303 Subwoofer comes with a Limited Warranty. Please refer to the warranty card included with your product or visit the official HERTZ website for detailed terms and conditions. This warranty typically covers manufacturing defects for a specified period from the date of purchase.
Note: Damage caused by improper installation, abuse, accident, or unauthorized modifications is not covered under warranty.
ഉപഭോക്തൃ പിന്തുണ
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact HERTZ customer support:
- Webസൈറ്റ്: www.hertzaudio.com
- ഇമെയിൽ: ഉദ്യോഗസ്ഥനെ റഫർ ചെയ്യുക webകോൺടാക്റ്റ് ഫോമുകൾക്കോ ഇമെയിൽ വിലാസങ്ങൾക്കോ ഉള്ള സൈറ്റ്.
- ഫോൺ: ഉദ്യോഗസ്ഥനെ റഫർ ചെയ്യുക webപ്രാദേശിക കോൺടാക്റ്റ് നമ്പറുകൾക്കായുള്ള സൈറ്റ്.
When contacting support, please have your product model (DS-303) and proof of purchase readily available.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.