Fartools One DBH 1700C Hammer Drill Instruction Manual

1. ആമുഖവും സുരക്ഷാ വിവരങ്ങളും

Thank you for choosing the Fartools One DBH 1700C Hammer Drill. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your tool. Please read this manual thoroughly before use and keep it for future reference.

പൊതു സുരക്ഷാ മുന്നറിയിപ്പുകൾ

• Always wear appropriate personal protective equipment (PPE) including safety glasses, hearing protection, and gloves.
• നിങ്ങളുടെ ജോലിസ്ഥലം നല്ല വെളിച്ചമുള്ളതാണെന്നും തടസ്സങ്ങളൊന്നുമില്ലെന്നും ഉറപ്പാക്കുക.
• ഉപകരണം പ്രവർത്തിപ്പിക്കുമ്പോൾ കുട്ടികളെയും കാഴ്ചക്കാരെയും അകറ്റി നിർത്തുക.
• തീപിടിക്കുന്ന ദ്രാവകങ്ങൾ, വാതകങ്ങൾ, പൊടി എന്നിവയുടെ സാന്നിധ്യം പോലെ സ്ഫോടനാത്മക അന്തരീക്ഷത്തിൽ പവർ ടൂളുകൾ പ്രവർത്തിപ്പിക്കരുത്.
• Always disconnect the power plug from the power source before making any adjustments, changing accessories, or storing the tool.
• Maintain a firm grip on the tool and be prepared for sudden reactions.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Fartools One DBH 1700C is a powerful 1500W hammer drill designed for heavy-duty breaking and chiseling operations on various materials such as concrete, brick, and stone. It features a robust design for durability and efficiency.

ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ

Your Fartools One DBH 1700C Hammer Drill package includes the following items:

• Fartools One DBH 1700C Hammer Drill unit
• Durable BMC (Bulk Moulding Compound) carry case
• One 410 mm flat chisel
• One 410 mm pointed chisel
• One oil pipette for lubrication
• Two carbon brushes (spare set)
• ഇൻസ്ട്രക്ഷൻ മാനുവൽ

Figure 2.1: Fartools One DBH 1700C Hammer Drill with its accessories.

Figure 2.2: The hammer drill and its included accessories neatly stored in the open carry case.

3. സജ്ജീകരണം

3.1 അൺപാക്കിംഗ്

1. Carefully remove the hammer drill and all accessories from the carry case.
2. Inspect the tool and accessories for any signs of damage during transit. If any damage is found, do not use the tool and contact customer support.
3. ലിസ്റ്റുചെയ്തിരിക്കുന്ന എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക.

3.2 Attaching Chisels

The hammer drill uses chisels with specific shank dimensions. Refer to the diagram below for proper chisel identification.

Figure 3.1: Chisel shank dimensions. Ensure compatibility before insertion.

1. പവർ സ്രോതസ്സിൽ നിന്ന് ഉപകരണം അൺപ്ലഗ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
2. Clean the chisel shank and the tool holder to remove any dust or debris.
3. Insert the chisel into the tool holder, pushing it firmly until it locks into place. You may need to rotate the chisel slightly to align it.
4. Pull on the chisel to ensure it is securely seated and cannot be easily removed.

3.3 പവർ കണക്ഷൻ

1. Ensure the power switch on the tool is in the 'OFF' position.
2. Connect the power cord to a suitable and grounded power outlet. Verify that the power supply voltage matches the requirements specified on the tool's rating label.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 ആരംഭിക്കുന്നതും നിർത്തുന്നതും

1. ഉപകരണം ആരംഭിക്കാൻ, ഓൺ/ഓഫ് സ്വിച്ച് അമർത്തുക.
2. To stop the tool, release or press the ON/OFF switch again, depending on the switch type (trigger or latching).

4.2 Chiseling Technique

This tool is designed for breaking and chiseling. Always maintain a firm grip and stable footing.

Figure 4.1: Proper posture and grip when operating the hammer drill for chiseling.

1. Position the chisel tip against the material to be broken.
2. Start the tool and apply steady, downward pressure. Allow the tool's percussion action to do the work. Avoid excessive force, which can lead to tool damage or user fatigue.
3. For optimal efficiency, use the appropriate chisel (flat for wider breaking, pointed for initial penetration or precise work).
4. Work systematically, moving the chisel along the desired breaking line.

4.3 Material Considerations

• Concrete and Stone: The hammer drill is highly effective on these materials. Start with a pointed chisel for initial penetration, then switch to a flat chisel for wider breaking.
• ഇഷ്ടിക: Exercise caution with brick to avoid excessive damage to surrounding areas.
• Always check for hidden electrical wires, water pipes, or other utilities before beginning any work.

5. പരിപാലനം

Regular maintenance ensures the longevity and optimal performance of your Fartools One DBH 1700C Hammer Drill.

5.1 വൃത്തിയാക്കൽ

1. After each use, disconnect the tool from the power supply.
2. പരസ്യം ഉപയോഗിച്ച് ഉപകരണത്തിന്റെ പുറംഭാഗം വൃത്തിയാക്കുക.amp തുണി. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ഉപയോഗിക്കരുത്.
3. Remove any dust or debris from the ventilation openings to prevent overheating.
4. Clean the tool holder thoroughly to ensure proper seating of chisels.

5.2 ലൂബ്രിക്കേഷൻ

The hammer drill requires periodic lubrication to maintain its percussion mechanism. Use the provided oil pipette for this purpose.

1. Refer to the tool's specific lubrication points, usually indicated in the tool's housing or a separate diagram (if available).
2. Apply a small amount of recommended lubricant using the oil pipette. Do not over-lubricate.
3. Perform lubrication according to the frequency recommended in the full service manual, typically after a certain number of operating hours.

5.3 കാർബൺ ബ്രഷ് മാറ്റിസ്ഥാപിക്കൽ

The carbon brushes are wear-and-tear parts. When they are worn, the tool's performance will decrease, or it may stop working. Your tool includes a spare set of carbon brushes.

1. വൈദ്യുതി വിതരണത്തിൽ നിന്ന് ഉപകരണം വിച്ഛേദിക്കുക.
2. Locate the carbon brush covers on the motor housing.
3. Unscrew the covers and carefully remove the old carbon brushes.
4. Insert the new carbon brushes, ensuring they are correctly oriented.
5. Replace the covers and tighten them securely.
6. After replacing, run the tool without load for a few minutes to allow the new brushes to seat properly.

5.4 സംഭരണം

When not in use, store the hammer drill in its carry case in a dry, secure location, out of reach of children.

Figure 5.1: The hammer drill stored securely in its closed carry case.

6. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with your hammer drill. For problems not listed here, please contact customer support.

7 സ്പെസിഫിക്കേഷനുകൾ

Technical specifications for the Fartools One DBH 1700C Hammer Drill:

8. വാറൻ്റിയും പിന്തുണയും

Fartools products are manufactured to high-quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Fartools webസൈറ്റ്.

For technical assistance, spare parts, or service inquiries, please contact Fartools customer support through their official channels. Always provide the model number (DBH 1700C) and ASIN (B00BD03OFO) when contacting support.