Puig 6320H Multi-Adjustable Clip-On Visor Instruction Manual

1. ആമുഖം

This manual provides instructions for the proper installation, operation, and maintenance of your Puig 6320H Light Smoke Multi-Adjustable Clip-On Visor. This visor is designed to enhance wind protection and reduce turbulence and noise on your motorcycle windshield.

പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:

• Multi-adjustable design for personalized wind deflection.
• Easy clip-on mounting, requiring no drilling into your existing windshield.
• Designed for quick installation and removal.

Image 1.1: The Puig 6320H Light Smoke Multi-Adjustable Clip-On Visor.

2 സുരക്ഷാ വിവരങ്ങൾ

Please read all safety information before installation and use. Failure to follow these instructions may result in product damage, injury, or property damage.

• സുരക്ഷിത ഇൻസ്റ്റാളേഷൻ: Ensure the visor is securely attached to the windshield according to the installation instructions. A loose visor can detach during operation, posing a hazard.
• ദൃശ്യപരത: Always ensure the visor does not obstruct your field of vision. Adjust its position to maintain clear visibility.
• മെറ്റീരിയൽ അനുയോജ്യത: This product is made of acrylic. Avoid using harsh chemicals or abrasive materials for cleaning, as this can damage the visor.
• നിർദ്ദേശം 65 മുന്നറിയിപ്പ്: ഈ ഉൽപ്പന്നത്തിൽ കാലിഫോർണിയ സംസ്ഥാനത്തിന് അറിയപ്പെടുന്ന രാസവസ്തുക്കൾ അടങ്ങിയിരിക്കാം, അത് കാൻസറിനും ജനന വൈകല്യങ്ങൾക്കും അല്ലെങ്കിൽ മറ്റ് പ്രത്യുൽപാദന വൈകല്യങ്ങൾക്കും കാരണമാകും. കൂടുതൽ വിവരങ്ങൾക്ക്, സന്ദർശിക്കുക www.P65Warnings.ca.gov.

3. പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്ന് ഉറപ്പാക്കുക:

• 1 x Puig 6320H Multi-Adjustable Clip-On Visor
• Mounting hardware (clips, screws, washers)

If any parts are missing or damaged, please contact Puig customer support immediately.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The Puig 6320H visor features a clip-on installation method, eliminating the need for drilling into your motorcycle's windshield.

1. വിൻഡ്ഷീൽഡ് തയ്യാറാക്കുക: Ensure your motorcycle's windshield is clean and free of debris where the visor will be attached.
2. Assemble Mounting Clips: Attach the provided mounting clips to the visor. Ensure all screws and washers are used as per the diagram. Do not overtighten.
3. Position the Visor: Carefully place the assembled visor onto the top edge of your motorcycle's windshield. The clips should securely grip the windshield.
4. Secure the Visor: Tighten the clips to firmly hold the visor in place. Ensure the visor is centered and stable. Verify that there is no movement or looseness.
5. അന്തിമ പരിശോധന: Gently attempt to move the visor by hand to confirm it is securely mounted and will not detach during riding.

Image 4.1: Diagram illustrating the clip-on installation process. Note: Drilling is not required.

Image 4.2: The Puig 6320H visor shown installed on a motorcycle windshield.

5. പ്രവർത്തനവും ക്രമീകരണവും

The Puig 6320H visor is multi-adjustable, allowing you to fine-tune its position for optimal wind protection and reduced noise.

• ക്രമീകരിക്കുന്ന ആംഗിൾ: The visor features adjustable hinges on each side. Loosen the adjustment points slightly to change the angle of the visor relative to your main windshield.
• ഉയരം ക്രമീകരിക്കുന്നു: The clips allow for minor vertical adjustment along the top edge of your windshield.
• Testing Adjustments: After making adjustments, ensure all fasteners are tightened. Test the new position at low speeds in a safe environment to confirm desired wind deflection and stability before riding at higher speeds.

കുറിപ്പ്: When adjusting, manipulate both sides of the visor simultaneously and carefully to avoid stressing the hinges. Avoid forcing adjustments.

6. പരിപാലനം

Proper care will extend the life and maintain the clarity of your Puig visor.

• വൃത്തിയാക്കൽ: Clean the visor with a soft cloth and mild soap and water. Avoid using abrasive cleaners, solvents, or ammonia-based products, as these can damage the acrylic material.
• പരിശോധന: Periodically inspect the visor and its mounting hardware for any signs of wear, damage, or looseness. Tighten any loose fasteners.
• സംഭരണം: When not in use for extended periods, store the visor in a clean, dry place away from direct sunlight and extreme temperatures.

7. പ്രശ്‌നപരിഹാരം

നിങ്ങൾ നേരിട്ടേക്കാവുന്ന പൊതുവായ പ്രശ്നങ്ങളെ ഈ വിഭാഗം അഭിസംബോധന ചെയ്യുന്നു.

• Visor feels loose or detaches:
  • Ensure all mounting screws and clips are securely tightened.
  • Verify that the clips are correctly gripping the windshield without obstruction.
  • Inspect the windshield for any damage that might prevent a secure attachment.
• Increased noise or turbulence after installation:
  • Adjust the angle and height of the visor. Small changes can significantly impact airflow.
  • Experiment with different positions to find the optimal setting for your riding posture and motorcycle.
• Missing parts upon delivery:
  • Refer to the "Package Contents" section. If parts are missing, contact Puig customer support immediately for assistance.

8 സ്പെസിഫിക്കേഷനുകൾ

അനുയോജ്യമായ മോഡലുകൾ

This visor is designed for universal fitment on various motorcycle windshields. Specific compatible models include, but are not limited to:

ചിത്രം 8.1: ഉദാample of compatible Yamaha Tenere models.

9. വാറൻ്റി

The Puig 6320H Multi-Adjustable Clip-On Visor is covered by a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims, please refer to the documentation included with your purchase or contact Puig directly.

10. പിന്തുണ

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Puig customer support.

• ഓൺലൈൻ: Visit the official Puig webപിന്തുണാ ഉറവിടങ്ങൾക്കും ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കുമുള്ള സൈറ്റ്.
• ഇമെയിൽ/ഫോൺ: Refer to your product packaging or the Puig webനിലവിലെ കോൺടാക്റ്റ് വിശദാംശങ്ങൾക്കായി സൈറ്റ്.