ആമുഖം
This manual provides essential instructions for the safe and proper installation, use, and maintenance of your EGLO 90266 Glass Lampshade. Please read these instructions carefully before proceeding with installation.
സുരക്ഷാ വിവരങ്ങൾ
- Always disconnect power to the lighting fixture before installing or cleaning the lampതണൽ.
- പൊട്ടലും പരിക്കും ഒഴിവാക്കാൻ ഗ്ലാസ് ഘടകങ്ങൾ ശ്രദ്ധയോടെ കൈകാര്യം ചെയ്യുക.
- എൽ ഉറപ്പാക്കുകampshade is securely fastened to prevent it from falling.
- Do not use abrasive cleaners or materials that could scratch or damage the glass.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps to install your EGLO 90266 Glass Lampനിഴൽ:
- അൺപാക്ക് ചെയ്യുന്നു: l ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുകampshade from its packaging. Inspect for any damage. Dispose of packaging materials responsibly.
- തയ്യാറാക്കൽ: Ensure the power to the lighting fixture is turned off at the main switch.
- ഇൻസ്റ്റലേഷൻ:
ചിത്ര വിവരണം: A diagram illustrating the installation process. It shows a glass lampshade being placed over a lamp holder (step 1). A threaded retaining ring is then positioned (step 2) and screwed upwards (step 3) onto the lamp l സുരക്ഷിതമാക്കാൻ ഹോൾഡർampshade. The final step (step 4) indicates tightening the ring by hand.
- ഘട്ടം 1: Carefully slide the glass lampl ന് മുകളിൽ തണൽamp holder of your fixture.
- ഘട്ടം 2: Take the provided retaining ring (threaded collar) and place it onto the lamp holder, below the lampതണൽ.
- ഘട്ടം 3: Screw the retaining ring upwards onto the lamp holder's threads until it firmly holds the lampസ്ഥലത്ത് തണൽ.
- ഘട്ടം 4: Hand-tighten the retaining ring to ensure the lampshade is secure but avoid over-tightening, which could damage the glass or threads.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The EGLO 90266 Glass Lampshade is a passive component of your lighting fixture. Once installed, its function is to diffuse light and provide aesthetic appeal. No specific operational steps are required for the lampshade itself.
പരിപാലനവും ശുചീകരണവും
To maintain the appearance and longevity of your glass lampനിഴൽ:
- വൃത്തിയാക്കൽ: പതിവായി എൽ തുടയ്ക്കുകampshade with a soft, dry, lint-free cloth to remove dust.
- For more thorough cleaning, gently wipe with a damp cloth using only water or a mild glass cleaner. Immediately dry with a clean, soft cloth to prevent water spots.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the glass surface.
- എൽ ഉറപ്പാക്കുകampshade is completely dry before reconnecting power to the fixture.
ട്രബിൾഷൂട്ടിംഗ്
നിങ്ങളുടെ എൽ-യിൽ എന്തെങ്കിലും പ്രശ്നങ്ങൾ നേരിടുകയാണെങ്കിൽampshade, consider the following:
- Lampshade is loose: Ensure the retaining ring is securely hand-tightened onto the lamp holder. Do not over-tighten.
- Lampshade appears dirty or smudged: Refer to the "Maintenance and Cleaning" section for proper cleaning procedures.
- Lampshade is damaged (cracked or broken): ഗ്ലാസ് എൽampshade is not repairable. It must be replaced.
For issues related to the lighting fixture itself (e.g., light not turning on), consult the manual for your specific lighting fixture or contact a qualified electrician.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | EGLO |
| മോഡൽ നമ്പർ | 90266 |
| മെറ്റീരിയൽ | ഗ്ലാസ് |
| നിറം | വെള്ള |
| ആകൃതി | വൃത്താകൃതി |
| അളവുകൾ (വ്യാസം x ഉയരം) | 9 സെ.മീ x 9 സെ.മീ |
| GTIN | 09002759902667 |
വാറൻ്റി വിവരങ്ങൾ
Specific warranty terms for the EGLO 90266 Glass Lampshade may vary by region and retailer. Please retain your proof of purchase and contact your point of sale or the manufacturer directly for detailed warranty information.
ഉപഭോക്തൃ പിന്തുണ
For further assistance, technical support, or to inquire about replacement parts, please contact your retailer or visit the official EGLO website. Have your model number (90266) and proof of purchase ready when contacting support.
