ആമുഖം
The NOCO GC020 12V 2-Way Adapter Splitter is designed to expand your vehicle's 12-volt power capabilities. It allows for the simultaneous use of two 12-volt devices from a single accessory outlet. This splitter incorporates a 20-amp micro-blade fuse for protection against short circuits, water-resistant caps to shield the female sockets from environmental elements, and an LED indicator to confirm active power. Constructed with high-conductivity 100-percent copper wire, it supports a rated capacity of 15-amperes. Molded strain reliefs provide additional durability to the cable connections. It is suitable for powering various 12-volt devices such as tire inflators, portable coolers, vacuum cleaners, and power inverters.
സുരക്ഷാ വിവരങ്ങൾ
- പരമാവധി കറൻ്റ്: Do not exceed the total rated capacity of 15 amperes for all connected devices. Overloading can cause the integrated 20A fuse to blow or lead to overheating.
- ഫ്യൂസ് സംരക്ഷണം: The GC020 includes a 20-amp micro-blade fuse for protection. If the splitter stops working, check and replace the fuse if necessary. Always replace with a fuse of the same rating.
- സുരക്ഷിത കണക്ഷൻ: Ensure the male plug is fully and securely inserted into the vehicle's 12V accessory outlet to prevent intermittent power or arcing.
- ജല പ്രതിരോധം: The female sockets are equipped with water-resistant caps. Always use these caps when the sockets are not in use to protect them from moisture and debris.
- പരിസ്ഥിതി വ്യവസ്ഥകൾ: Avoid exposing the splitter to extreme temperatures or harsh chemicals.
- കുട്ടികൾ: കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
പാക്കേജ് ഉള്ളടക്കം
Your NOCO GC020 package should contain the following item:
- 1 x GC020 12-Volt Adapter Plug Socket With 2-Way Splitter
സജ്ജമാക്കുക
- Locate 12V Outlet: Identify an available 12V accessory outlet (cigarette lighter socket) in your vehicle.
- Insert Splitter: Firmly insert the male 12V plug of the GC020 splitter into your vehicle's 12V accessory outlet.
- പവർ പരിശോധിക്കുക: Once connected, the integrated LED power indicator on the male plug will illuminate red, signifying that the splitter is receiving power from your vehicle.
Image: The NOCO GC020 12V splitter's male plug inserted into a vehicle's 12V outlet, showing the red LED power indicator. This confirms the splitter is receiving power.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
- ഉപകരണങ്ങൾ ബന്ധിപ്പിക്കുക: Remove the water-resistant caps from the female sockets. Connect your 12V devices (e.g., tire inflator, cooler, phone charger) into the two available female sockets.
- പവർ ഓൺ ഉപകരണങ്ങൾ: Activate your connected 12V devices as per their individual instructions.
- മോണിറ്റർ പവർ: The LED indicator on the male plug will remain lit as long as power is supplied to the splitter. If your vehicle has an ignition shut-off feature, devices will not receive power when the car is not running.
- വിച്ഛേദിക്കുന്നു: When finished, disconnect your devices and replace the water-resistant caps on the female sockets to protect them.
Image: The NOCO GC020 splitter illustrating its single 12V input and two 12V output sockets, enabling dual device power.
Image: The NOCO GC020 splitter in use, simultaneously powering a tire inflator and charging a smartphone, demonstrating its power and charge capabilities for 12V devices and accessories.
മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: Keep the splitter clean and free from dust and debris. Use a dry cloth to wipe the exterior. Do not use liquid cleaners.
- പരിശോധന: Regularly inspect the cable and connectors for any signs of damage, fraying, or corrosion. Discontinue use if any damage is found.
- തൊപ്പികൾ: Always ensure the water-resistant caps are properly seated over the female sockets when not in use to prevent ingress of dirt, dust, and moisture.
ചിത്രം: ഒരു ക്ലോസ്-അപ്പ് view of the NOCO GC020 splitter's water-resistant caps, showing water droplets on their surface, highlighting their rugged design for protection against elements.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| No power to devices / LED indicator off |
|
|
| Devices intermittently lose power |
|
|
| Devices not working, but LED is on |
|
|
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡൽ നമ്പർ | GC020 |
| ഇൻപുട്ട് വോളിയംtage | 12 വോൾട്ട് |
| നിലവിലെ റേറ്റിംഗ് | 15 Amps (പരമാവധി) |
| തുറമുഖങ്ങളുടെ എണ്ണം | 2 (Female 12V Sockets) |
| വയർ ഗേജ് | 16AWG |
| ഇന്റഗ്രേറ്റഡ് ഫ്യൂസ് | 20A Micro-Blade Fuse |
| അളവുകൾ (L x W x H) | 2.76 x 2.36 x 7.09 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 0.01 പൗണ്ട് |
| നിറം | ചുവപ്പും കറുപ്പും |
| കണക്റ്റർ തരം | സിഗരറ്റ് ലൈറ്റർ പ്ലഗ് |
Image: A diagram detailing the dimensions and key components of the NOCO GC020 splitter, including the 12V input, splitter body, two 12V outputs with watertight caps, and the energy-efficient LED indicator.
വാറൻ്റി
The NOCO GC020 12 Volt Plug 2-Way Splitter is covered by a 1-വർഷ പരിമിത വാറൻ്റി. This warranty covers defects in material and workmanship under normal use. For specific terms, conditions, and claim procedures, please refer to the official NOCO warranty documentation or contact NOCO customer support.
പിന്തുണ
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please visit the official NOCO website or contact their customer support directly. Always provide your product model number (GC020) when seeking support.