Hager EK570 Battery-Powered Thermostat User Manual

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your Hager EK570 battery-powered weekly thermostat. Please read this guide thoroughly before use to ensure proper function, safety, and to maximize the benefits of its programmable features. Keep this manual for future reference.

2 സുരക്ഷാ വിവരങ്ങൾ

• Always disconnect power to the heating system before attempting any installation or maintenance.
• Installation should only be performed by a qualified electrician or competent person.
• Do not expose the thermostat to extreme temperatures, direct sunlight, high humidity, or water.
• Use only LR6 (AA) batteries as specified. Do not mix old and new batteries or different types of batteries.
• ഉപകരണം കുട്ടികളിൽ നിന്ന് അകറ്റി നിർത്തുക.
• Do not attempt to open or repair the thermostat yourself. Refer to qualified service personnel.

3. പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• Hager EK570 Thermostat Unit
• 2 x LR6 (AA) Batteries
• Mounting Screws and Wall Plugs (if applicable)
• ഈ ഉപയോക്തൃ മാനുവൽ

4. ഉൽപ്പന്നം കഴിഞ്ഞുview

Familiarize yourself with the components of your Hager EK570 thermostat:

ചിത്രം 1: മുൻഭാഗം view of the Hager EK570 thermostat. The device features a clear LCD display at the top, two square buttons below the display, and a central control cluster at the bottom with '-', 'OK', and '+' buttons.

• LCD ഡിസ്പ്ലേ: Shows current temperature, time, day, operating mode, and program status.
• നിയന്ത്രണ ബട്ടണുകൾ: Used for navigating menus, adjusting settings, and selecting modes. Typically includes 'Mode', 'Set', 'Up', 'Down', and 'OK' buttons.
• ബാറ്ററി കമ്പാർട്ട്മെൻ്റ്: യൂണിറ്റിന്റെ പിൻഭാഗത്ത് സ്ഥിതിചെയ്യുന്നു.

5. സജ്ജീകരണം

5.1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

1. Remove the back cover of the thermostat.
2. Insert the 2 x LR6 (AA) batteries, ensuring correct polarity (+/-).
3. Replace the back cover. The display should now activate.

5.2. തെർമോസ്റ്റാറ്റ് മൌണ്ട് ചെയ്യുന്നു

The Hager EK570 is designed for surface mounting.

1. Choose a suitable location on an interior wall, away from direct sunlight, drafts, and heat sources (e.g., radiators, lamps). The recommended height is approximately 1.5 meters from the floor.
2. Carefully detach the front part of the thermostat from its base plate.
3. Mark the drilling points on the wall using the base plate as a template.
4. ദ്വാരങ്ങൾ തുരന്ന് മതിൽ പ്ലഗുകൾ തിരുകുക.
5. Secure the base plate to the wall using the provided screws.
6. Connect the heating system wires to the terminals on the base plate according to the wiring diagram provided with your heating system. Ensure all connections are secure and correct.
7. Reattach the front part of the thermostat to the base plate, ensuring it clicks securely into place.

5.3. Initial Settings (Time and Date)

Upon first power-up or after battery replacement, you may need to set the current time and day.

1. Press the 'SET' or 'MODE' button to enter the settings menu.
2. Use the '+' or '-' buttons to navigate to 'Time' or 'Date' settings.
3. Press 'OK' to confirm and then use '+' or '-' to adjust the values (hour, minute, day, month, year).
4. Press 'OK' to save each setting and exit the menu.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Hager EK570 offers various operating modes and programming options to optimize your heating.

6.1. ഓപ്പറേറ്റിംഗ് മോഡുകൾ തിരഞ്ഞെടുക്കൽ

The thermostat supports the following modes:

• കംഫർട്ട് മോഡ്: Maintains a comfortable temperature (e.g., 21°C) during occupied periods.
• കുറച്ച മോഡ്: Maintains a lower, energy-saving temperature (e.g., 18°C) during unoccupied periods or at night.
• മഞ്ഞ് സംരക്ഷണ മോഡ്: Maintains a minimum temperature (e.g., 5°C) to prevent pipes from freezing.
• മാനുവൽ മോഡ്: Allows you to set a constant temperature that overrides any programmed schedule.
• അവധിക്കാല മോഡ്: Maintains a specific temperature for an extended period (e.g., during vacation).

To switch between modes, press the 'MODE' button repeatedly until the desired mode is displayed.

6.2. താപനില സെറ്റ്പോയിന്റ് ക്രമീകരിക്കൽ

In any operating mode (except Frost Protection), you can temporarily adjust the temperature setpoint:

1. Use the '+' or '-' buttons to increase or decrease the desired temperature.
2. The new setpoint will be active until the next programmed event or until you manually change it again. This is known as a temporary override.

6.3. പ്രതിവാര പ്രോഗ്രാമിംഗ്

The EK570 is a weekly programmable thermostat, allowing you to set up to 48 program steps per day across 4 setpoints (Comfort, Reduced, etc.). It comes with 3 pre-recorded programs and 1 free program for customization.

1. Press the 'PROG' or 'SET' button to enter programming mode.
2. Use '+' or '-' to select the day of the week you wish to program (e.g., Monday, Tuesday, etc.).
3. Press 'OK' to confirm the day.
4. The display will show the first program period. Use '+' or '-' to set the start time and then 'OK'.
5. Next, select the desired operating mode (Comfort, Reduced, etc.) for this period using '+' or '-' and confirm with 'OK'.
6. Repeat steps 4 and 5 for all desired program periods for that day.
7. You can copy programs from one day to another if needed (refer to specific instructions in the full manual for this feature).
8. Exit programming mode by pressing 'PROG' or 'MODE' button.

7. പരിപാലനം

7.1. വൃത്തിയാക്കൽ

തെർമോസ്റ്റാറ്റ് c വൃത്തിയാക്കുകasing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these can damage the plastic and electronic components.

7.2. ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

The thermostat is powered by 2 x LR6 (AA) batteries. When the battery symbol appears on the display, or if the display becomes dim, it is time to replace the batteries.

1. Remove the back cover of the thermostat.
2. പഴയ ബാറ്ററികൾ നീക്കം ചെയ്യുക.
3. Insert new 2 x LR6 (AA) batteries, observing correct polarity.
4. പുറംചട്ട മാറ്റിസ്ഥാപിക്കുക.

The thermostat has a power reserve of approximately 10 minutes, allowing for battery replacement without losing programmed settings, provided the replacement is done promptly.

8. പ്രശ്‌നപരിഹാരം

9 സ്പെസിഫിക്കേഷനുകൾ

10. വാറൻ്റിയും പിന്തുണയും

For detailed warranty information, technical support, or service inquiries, please refer to the official Hager website or contact your authorized retailer. Keep your purchase receipt as proof of purchase.