ആമുഖം
വാങ്ങിയതിന് നന്ദി.asing the Adesso Trio Floor Lamp, Model 4305-22. This versatile floor lamp നൽകാൻ രൂപകൽപ്പന ചെയ്തിരിക്കുന്നു ample lighting and convenient storage solutions within a compact footprint. Featuring three individual lights with pull chain switches and two clear acrylic shelves, it enhances any room with both style and functionality. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.
Figure 1: Adesso Trio Floor Lamp, Model 4305-22
സുരക്ഷാ വിവരങ്ങൾ
- Always disconnect the power supply before cleaning, changing bulbs, or performing any maintenance.
- നിർദ്ദിഷ്ട തരത്തിന്റെയും വാട്ടിന്റെയും ബൾബുകൾ മാത്രം ഉപയോഗിക്കുക.tage (three 40W incandescent or equivalent CFL/LED bulbs). Exceeding the maximum wattage can create a fire hazard.
- ഈ എൽamp is intended for indoor use only. Do not expose to moisture or extreme temperatures.
- എൽ ഉറപ്പാക്കുകamp ടിപ്പിംഗ് തടയാൻ സ്ഥിരതയുള്ളതും നിരപ്പായതുമായ ഒരു പ്രതലത്തിൽ സ്ഥാപിച്ചിരിക്കുന്നു.
- Keep the electrical cord away from heat sources, sharp edges, and wet areas.
- The clear acrylic shelves are for light decorative items or storage. Do not place heavy objects on them (maximum weight capacity per shelf is approximately 1.5 lbs).
പാക്കേജ് ഉള്ളടക്കം
അസംബ്ലി ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:
- Lamp Base (Brushed Steel)
- Vertical Poles (3 sections per pole, total 3 poles)
- White Linen Cylindrical Shades (3 pieces)
- Clear Acrylic Shelves (2 pieces)
- Pull Chain Switches (3 pieces, pre-attached to lamp സോക്കറ്റുകൾ)
- Hardware Pack (screws, washers, etc., if applicable)
- പവർ കോർഡ്
സജ്ജീകരണവും അസംബ്ലിയും
Follow these steps to assemble your Adesso Trio Floor Lamp. No special tools are required.
- ഘടകങ്ങൾ അൺപാക്ക് ചെയ്യുക: പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഭാഗങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്ത് പോറലുകൾ ഉണ്ടാകാതിരിക്കാൻ വൃത്തിയുള്ളതും മൃദുവായതുമായ ഒരു പ്രതലത്തിൽ വയ്ക്കുക.
- തൂണുകൾ കൂട്ടിച്ചേർക്കുക: Connect the vertical pole sections by gently twisting them clockwise until secure. Ensure the wiring passes freely through the poles.
- അടിസ്ഥാനം അറ്റാച്ചുചെയ്യുക: Securely attach the assembled poles to the brushed steel lamp അടിസ്ഥാനം.
- ഷെൽഫുകൾ ഇൻസ്റ്റാൾ ചെയ്യുക: Slide the two clear acrylic shelves onto the poles at the desired heights. The shelves are designed to fit snugly between the pole sections.
- എൽ അറ്റാച്ചുചെയ്യുകamp സോക്കറ്റുകൾ: Ensure the three lamp sockets with pre-attached pull chains are securely fastened to the top of each pole.
- Place Shades: Carefully place each white linen cylindrical shade over its respective lamp സോക്കറ്റ്.
- ബൾബുകൾ ചേർക്കുക: Screw three 40-watt incandescent or equivalent CFL/LED bulbs (not included) into the lamp sockets. Do not overtighten.
- സ്ഥാനം എൽamp: എൽ സ്ഥാപിക്കുകamp in its desired location, ensuring the power cord is not pinched or obstructed.
Figure 2: Detail of the lamp's base and shades.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
- പവർ കണക്ഷൻ: എൽ പ്ലഗ് ചെയ്യുകamp's clear power cord into a standard electrical outlet. The lamp is smart outlet compatible for integration with smart home systems.
- ഓൺ/ഓഫ് ചെയ്യുന്നു: Each of the three lights is controlled by its own pull chain switch. Pull the chain once to turn the light on, and pull it again to turn it off. This allows for customizable lighting, enabling you to illuminate one, two, or all three lights as needed.
Figure 3: Key features of the Adesso Trio Floor Lamp.
മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: വൃത്തിയാക്കാൻ എൽamp, ensure it is unplugged. Wipe the brushed steel base and poles with a soft, dry cloth. For the white linen shades, use a lint roller or a soft brush to remove dust. The clear acrylic shelves can be wiped with a damp cloth and mild soap, then dried thoroughly. Avoid abrasive cleaners.
- ബൾബ് മാറ്റിസ്ഥാപിക്കൽ: എല്ലായ്പ്പോഴും എൽ അൺപ്ലഗ് ചെയ്യുകamp before replacing bulbs. Allow old bulbs to cool completely before removal. Replace with three 40-watt incandescent or equivalent CFL/LED bulbs.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Lamp ഓണാക്കുന്നില്ല. | 1. എൽamp പ്ലഗ് ഇൻ ചെയ്തിട്ടില്ല. 2. Bulb is loose or burnt out. 3. Power outlet is not functioning. | 1. Ensure the power cord is securely plugged into an active outlet. 2. Tighten or replace the bulb(s). 3. Test the outlet with another device or check your circuit breaker. |
| ലൈറ്റ് മിന്നുന്നു. | 1. അയഞ്ഞ ബൾബ്. 2. Incorrect bulb type/wattage. 3. തെറ്റായ ബൾബ്. | 1. Tighten the bulb(s). 2. Ensure bulbs meet specifications (40W incandescent or equivalent CFL/LED). 3. Replace the flickering bulb. |
| Lamp അസ്ഥിരമാണ്. | 1. Not on a level surface. 2. Poles not fully tightened. | 1. l നീക്കുകamp പരന്നതും സ്ഥിരതയുള്ളതുമായ ഒരു പ്രതലത്തിലേക്ക്. 2. Re-tighten all pole connections. |
സ്പെസിഫിക്കേഷനുകൾ
- മോഡൽ നമ്പർ: 4305-22
- അളവുകൾ (D x W x H): 11.7"D x 14"W x 68"H
- ഇനത്തിൻ്റെ ഭാരം: 15.2 പൗണ്ട്
- മെറ്റീരിയൽ തരം: Metal (Brushed Steel Base), Linen (Shades), Acrylic (Shelves)
- ഷേഡ് നിറം: വെള്ള
- പ്രകാശ സ്രോതസ്സുകളുടെ എണ്ണം: 3
- ബൾബ് ബേസ്: E26 മീഡിയം
- വാട്ട്tage: Max 40 watts per bulb (Incandescent or equivalent CFL/LED)
- സ്വിച്ച് തരം: Pull Chain (3 individual switches)
- ഊർജ്ജ സ്രോതസ്സ്: കോർഡഡ് ഇലക്ട്രിക്
- ചരട് നീളം: ഏകദേശം 5 അടി (60 ഇഞ്ച്)
- ഇൻസ്റ്റലേഷൻ തരം: ഫ്രീസ്റ്റാൻഡിംഗ്
- ഇൻഡോർ/ഔട്ട്ഡോർ ഉപയോഗം: ഇൻഡോർ മാത്രം
Figure 4: Dimensions of the Adesso Trio Floor Lamp.
വാറൻ്റി വിവരങ്ങൾ
Manufacturer Warranty Description: N/a.
For specific warranty details or to inquire about product guarantees, please refer to the documentation provided at the time of purchase or contact the retailer directly.
ഉപഭോക്തൃ പിന്തുണ
If you have any questions, require assistance with assembly, or encounter issues not covered in this manual, please contact the retailer where you purchased the product or visit the official Adesso webപിന്തുണാ ഉറവിടങ്ങൾക്കായുള്ള സൈറ്റ്.
Adesso Official Webസൈറ്റ്: www.adessohome.com