Campagnolo Veloce 10-Speed Ergopower Shifter Instruction Manual

ആമുഖം

സിampagnolo Veloce Ergopower Shifters are engineered for precise and rapid gear changes on 10-speed bicycle drivetrains. Featuring ULTRA-SHIFT ergonomics, these shifters provide a firm grip and intuitive control over both shifting and braking functions. Constructed from durable materials, they ensure reliable performance for cycling enthusiasts.

This manual provides essential information for the proper installation, operation, and maintenance of your Campagnolo Veloce Ergopower Shifters.

ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ: Handles, Grips, Cables, Ultra-low friction housing.

ചിത്രം 1: മുൻഭാഗം view of Campagnolo Veloce Ergopower Shifter. This image displays the front view സി യുടെampagnolo Veloce Ergopower Shifter, highlighting the main brake/shift lever and the Veloce branding.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Proper installation is crucial for the optimal performance and safety of your shifters. If you are unsure about any step, consult a professional bicycle mechanic.

1. അൺപാക്കിംഗും പരിശോധനയും: Carefully remove all components from the packaging. Verify that all included items (handles, grips, cables, ultra-low friction housing) are present and undamaged.
2. ഹാൻഡിൽബാർ മൗണ്ടിംഗ്: Position the Ergopower shifters on your bicycle's handlebars. Use the handlebar clamp mechanism to secure them firmly. Ensure proper alignment for comfortable reach and optimal control. A Torx tool may be required for secure fastening.
3. കേബിൾ ഇൻസ്റ്റാളേഷൻ: Route the gear and brake cables through the shifters and along the bicycle frame. Utilize the provided ultra-low friction housing for smooth operation. Ensure cables are free from kinks and obstructions. Proper cable tension is crucial for accurate shifting and effective braking.
4. പ്രാരംഭ ക്രമീകരണങ്ങൾ: After installation, perform initial adjustments for both front and rear derailleurs and brake calipers. Fine-tune cable tension to achieve crisp gear changes and responsive braking. Refer to your bicycle's derailleur and brake manufacturer guidelines for specific adjustment procedures.

ചിത്രം 2: വശം view of Campagnolo Veloce Ergopower Shifter. This image illustrates the ergonomic hood design for comfortable hand placement and access to the shift levers.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

സിampagnolo Veloce Ergopower Shifters offer intuitive control for your 10-speed drivetrain.

ഗിയർ ഷിഫ്റ്റിംഗ്

• To shift to a വലുത് cog (easier gear), press the main lever inwards. The ULTRA-SHIFT mechanism allows for multiple shifts in a single sweep.
• To shift to a ചെറുത് cog (harder gear), press the smaller thumb lever. This action releases cable tension, moving the chain to a smaller cog.

ബ്രേക്കിംഗ്

The main lever also functions as the brake lever. Squeeze the lever towards the handlebar to engage the brake calipers. The ergonomic design ensures a firm and comfortable grip, allowing for precise control during various riding conditions.

മെയിൻ്റനൻസ്

Regular maintenance ensures the longevity and optimal performance of your Campagnolo Veloce Ergopower Shifters.

1. വൃത്തിയാക്കൽ: Periodically clean the shifter bodies and levers with a damp cloth. Avoid using harsh chemicals that could damage the plastic or aluminum components.
2. കേബിൾ പരിശോധന: Inspect gear and brake cables for signs of fraying, especially near the shifters and derailleurs. Frayed cables can lead to poor shifting performance and potential failure. Replace cables and housing as needed, typically every 6,000-7,000 hours of use or annually, depending on riding conditions.
3. ലൂബ്രിക്കേഷൻ: Apply a small amount of appropriate lubricant to the pivot points of the levers and the cable entry/exit points to ensure smooth operation. Do not over-lubricate.
4. ക്രമീകരണ പരിശോധനകൾ: Regularly check and adjust gear and brake cable tension. Proper adjustment of the front derailleur can significantly extend its lifespan and improve shifting accuracy.

ട്രബിൾഷൂട്ടിംഗ്

This section addresses common issues you might encounter with your Campagnolo Veloce Ergopower Shifters.

Issue: Inaccurate or Slow Shifting

• സാധ്യമായ കാരണം: Insufficient cable tension. പരിഹാരം: Adjust the barrel adjusters on the shifter or derailleur to increase cable tension. Ensure cables are routed correctly and freely moving within the housing.
• സാധ്യമായ കാരണം: Frayed or worn cables/housing. പരിഹാരം: Inspect cables and housing for damage. Replace if necessary.
• സാധ്യമായ കാരണം: Dirty or unlubricated components. പരിഹാരം: Clean and lubricate the shifter mechanism and cable paths.

Issue: Brake Levers Feel Spongy or Ineffective

• സാധ്യമായ കാരണം: Loose brake cable. പരിഹാരം: Tighten the brake cable at the caliper and ensure proper tension. Check for any slack in the system.
• സാധ്യമായ കാരണം: Frayed or worn brake cable/housing. പരിഹാരം: Inspect brake cables and housing for damage. Replace if necessary.

If problems persist after attempting these solutions, it is recommended to consult a qualified bicycle mechanic.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി വിവരങ്ങൾ

ഈ സിampagnolo Veloce Ergopower Shifter comes with a Limited Warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the official Campagnolo warranty documentation provided with your purchase or visit the official Campഅഗ്നോലോ webസൈറ്റ്.

ഉപഭോക്തൃ പിന്തുണ

For further assistance, technical support, or inquiries not covered in this manual, please contact Campagnolo customer service directly. Official contact information can be found on the Campഅഗ്നോലോ webസൈറ്റ് (www.campagnolo.com).