PROFLO PFXSC32C Multi Turn Straight Supply Stop with Strainer - Chrome

ആമുഖം

This manual provides instructions for the installation, operation, and maintenance of the PROFLO PFXSC32C 5/8" x 3/8" Multi Turn Straight Supply Stop with Strainer. This product is designed to control water flow to plumbing fixtures, featuring a durable brass construction and a chrome finish for longevity and corrosion resistance. The integrated strainer helps prevent debris from entering the fixture.

സുരക്ഷാ വിവരങ്ങൾ

Please read all instructions carefully before installation. Failure to follow these instructions may result in property damage or personal injury.

• ഏതെങ്കിലും പ്ലംബിംഗ് ജോലികൾ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലായ്പ്പോഴും പ്രധാന ജലവിതരണം ഓഫ് ചെയ്യുക.
• സുരക്ഷാ ഗ്ലാസുകളും കയ്യുറകളും പോലുള്ള ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ ധരിക്കുക.
• ചോർച്ച തടയാൻ എല്ലാ കണക്ഷനുകളും സുരക്ഷിതമാണെന്ന് ഉറപ്പാക്കുക. അമിതമായി മുറുക്കരുത്.
• ഏതെങ്കിലും ഘട്ടത്തെക്കുറിച്ച് നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ, യോഗ്യതയുള്ള ഒരു പ്ലംബറെ സമീപിക്കുക.
• This product is intended for use with potable water systems only.

ഉൽപ്പന്നം കഴിഞ്ഞുview

Image: The PROFLO PFXSC32C Multi Turn Straight Supply Stop with Strainer, featuring a chrome finish and a multi-turn handle. This image displays the valve's overall design and connection points.

The PROFLO PFXSC32C is a straight supply stop valve designed for reliable water flow control. It features a 5/8" compression inlet and a 3/8" compression outlet. The multi-turn handle allows for precise control over water flow. An integrated strainer is included to filter out sediment and debris, protecting your plumbing fixtures.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

ആവശ്യമായ ഉപകരണങ്ങൾ:

• ക്രമീകരിക്കാവുന്ന റെഞ്ച് അല്ലെങ്കിൽ ബിasin റെഞ്ച്
• Pipe cutter (if cutting new supply lines)
• Teflon tape (optional, for threaded connections if applicable)
• Bucket and towels (for catching drips)

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:

1. ജലവിതരണം ഓഫാക്കുക: Locate the main water shut-off valve for your home or the specific area where you are working and turn it off. Open a nearby faucet to relieve pressure and drain any remaining water from the lines.
2. Prepare the Inlet Pipe: Ensure the existing pipe (typically 5/8" OD) is clean, smooth, and free of burrs. If replacing an old valve, remove it and clean the pipe end.
3. Install Compression Nut and Ferrule: Slide the compression nut (included with the valve) onto the pipe, followed by the compression ferrule (ring). Ensure the ferrule is oriented correctly.
4. Attach the Supply Stop: Insert the pipe end with the nut and ferrule into the inlet of the PROFLO PFXSC32C supply stop. Hand-tighten the compression nut onto the valve body.
5. Tighten Connection: Using an adjustable wrench, carefully tighten the compression nut. Turn it about 1/2 to 3/4 of a turn past hand-tight. Do not overtighten, as this can damage the ferrule or valve.
6. Connect Fixture Supply Line: Attach the 3/8" supply line from your faucet or toilet to the outlet of the supply stop. Hand-tighten the nut, then use a wrench to tighten it an additional 1/4 to 1/2 turn.
7. Restore Water Supply and Check for Leaks: Slowly turn the main water supply back on. Check all connections for leaks. If a leak occurs, tighten the connection slightly until the leak stops.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The PROFLO PFXSC32C is a multi-turn valve, meaning it requires several rotations of the handle to fully open or close the water flow.

• തുറക്കാൻ: Turn the handle counter-clockwise until it stops. This will allow full water flow to the connected fixture.
• അടയ്ക്കാൻ: Turn the handle clockwise until it stops. This will completely shut off the water flow to the connected fixture.
• To Adjust Flow: Turn the handle partially to achieve a desired reduced water flow rate.

മെയിൻ്റനൻസ്

Regular maintenance ensures optimal performance and extends the life of your supply stop.

• വൃത്തിയാക്കൽ: Clean the exterior chrome finish with a soft cloth and mild soap. Avoid abrasive cleaners or harsh chemicals, as they can damage the finish.
• സ്‌ട്രൈനർ ക്ലീനിംഗ്: If water flow to the fixture becomes restricted, the integrated strainer may be clogged. To clean, turn off the water supply at the supply stop, disconnect the fixture supply line, and carefully remove the strainer screen. Rinse it under running water to remove debris, then reassemble.
• ചോർച്ച പരിശോധനകൾ: Periodically inspect the connections for any signs of leaks. Tighten connections slightly if necessary.
• പ്രവർത്തനം: Operate the valve fully open and fully closed a few times annually to prevent mineral buildup and ensure smooth operation.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

The PROFLO PFXSC32C Multi Turn Straight Supply Stop is covered under PROFLO's 1 വർഷത്തെ പരിമിത വാറൻ്റി. സാധാരണ ഉപയോഗത്തിലും സേവനത്തിലും മെറ്റീരിയലിലും ജോലിയിലും ഉണ്ടാകുന്ന പിഴവുകൾ ഈ വാറന്റി ഉൾക്കൊള്ളുന്നു.

For warranty claims, technical assistance, or further information, please contact PROFLO customer support through their official website or authorized distributors. Keep your proof of purchase for warranty validation.