My Mega Motion NM-7001-BO recliner rises fully, but when lowering, it stops just past the seated position and will not recline fully. Could the hand control (ID# PO-MBN-7471 / H167000985) be the problem?

Based on the behavior of your Mega Motion NM7001, the issue could indeed be the hand control, but there are several mechanical and electrical checks you should perform first to narrow it down:Check for Obstructions: The most common reason a chair stops moving past the seated position is a physical obstruction. Inspect the area under and behind the chair for any objects, rugs, or debris that might be blocking the reclining mechanism.Inspect Cable Connections: Ensure the handwand cable is firmly connected to the chair's internal wiring. A loose connection can cause intermittent signals, especially when the chair moves into a specific angle that puts tension on the cord.Verify the Handwand: If the "Down" button works to lower the chair from a lifted position but stops responding once it reaches the seated position, the button contact inside the handwand (PO-MBN-7471) may be failing. You can test this by applying firm, consistent pressure to the button to see if the movement continues.Check the Power Transformer: Ensure the power cord and transformer are not pinched or damaged. If the chair lacks sufficient power under the load of reclining, it may stall.Inspect the Mechanism: Look for any loose components or bent metal in the counter-balanced recliner mechanism. If the frame is misaligned, it may bind and stop the motor from reclining further.If the chair moves smoothly in the "Up" direction but consistently fails at the same point in the "Down" direction without any physical blockage, replacing the hand control is a common and effective next step. If the problem persists after replacing the handwand, the issue may lie with the motor or the reclining mechanism itself.

Mega Motion NM7001

Mega Motion Vance Ultimate Power Recliner Chair NM7001 Instruction Manual

Model: NM7001

ആമുഖം

This manual provides comprehensive instructions for the assembly, safe operation, and proper maintenance of your Mega Motion Vance Ultimate Power Recliner Chair, model NM7001. Please read this manual thoroughly before using the chair to ensure safe and efficient operation.

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

WARNING: To reduce the risk of injury, read all instructions before using the chair.

Always use the lift and recline mechanism with caution. Ensure the area around the chair is clear before operating.
Do not exceed the maximum weight limit of 500 pounds (227 kg) to ensure stability and safety.
കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും കസേരയുടെ ചലിക്കുന്ന ഭാഗങ്ങളിൽ നിന്ന് അകറ്റി നിർത്തുക.
എല്ലാ വൈദ്യുത കമ്പിളുകളും ശരിയായി ബന്ധിപ്പിച്ചിട്ടുണ്ടെന്നും, പിഞ്ച് ചെയ്തിട്ടില്ലെന്നും അല്ലെങ്കിൽ കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക.
Do not allow anyone to sit on the footrest when it is extended.
Disconnect power before cleaning or servicing the chair.
This chair is designed for indoor use only.

Proposition 65 Warning: This product can expose you to chemicals including wood dust, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

അസംബ്ലി നിർദ്ദേശങ്ങൾ

Your Mega Motion Vance Ultimate Power Recliner Chair requires minimal assembly. It is recommended that two people assemble the chair due to the weight of some components.

അൺബോക്‌സിംഗും തയ്യാറെടുപ്പും

Carefully open the shipping carton. Retain all packaging materials until assembly is complete and you are satisfied with the product.
Remove all components from the carton. Inspect for any damage.
Place the base of the chair in the desired location, ensuring there is enough space for reclining and lifting functions.

Mega Motion Vance Power Recliner Chair in its shipping box

Figure 1: The Mega Motion Vance Power Recliner Chair as received in its shipping carton. Note the 'Handle with Care' and 'Up' indicators.

Attaching the Chair Back

Align the metal receivers on the chair back with the posts on the chair base.
Slide the chair back down onto the posts until it is securely seated. You may hear a click.
Locate and connect any electrical cables between the chair back and the base. Ensure connections are firm.
Connect the power transformer to the chair's power input and then plug the transformer into a grounded electrical outlet.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Mega Motion Vance Ultimate Power Recliner Chair features a simple two-button handwand for controlling the lift and recline functions.

Handwand Control

The handwand is typically located in a side pocket or attached to the chair arm. It features two buttons:

മുകളിലേക്കുള്ള ബട്ടൺ: Press and hold to raise the chair to a standing position or to bring it to an upright seated position from a reclined state.
താഴേക്കുള്ള ബട്ടൺ: Press and hold to recline the chair or to lower it from a lifted position to a seated position.

The handwand also includes a USB port for charging small electronic devices.

Chair Positions

This chair offers three primary positions:

Upright/Seated Position: The standard sitting position.
Partial Recline Position: A comfortable position for reading or watching television.
Full Recline Position: A fully extended position for resting or sleeping.

Mega Motion Vance Power Recliner Chair in upright seated position

Figure 2: Chair in upright seated position.

Mega Motion Vance Power Recliner Chair in lifted position, assisting user to stand

Figure 3: Chair in lifted position, assisting with standing.

Mega Motion Vance Power Recliner Chair in fully reclined position

Figure 4: Chair in fully reclined position.

എമർജൻസി ബാറ്ററി ബാക്കപ്പ്

ഒരു പവർ ഈ സാഹചര്യത്തിൽtage, the chair is equipped with an integrated emergency battery backup system. This allows for a limited number of operations to return the chair to a safe, seated position. Ensure batteries are installed and checked periodically.

പരിചരണവും പരിപാലനവും

Regular care will extend the life and appearance of your recliner chair.

ക്ലീനിംഗ് ഫാബ്രിക്: For general cleaning, use a soft cloth and mild soap solution. Test on an inconspicuous area first. Do not saturate the fabric.
പവർ കോർഡ്: Periodically inspect the power cord for any signs of damage. If damaged, discontinue use and contact customer support.
ചലിക്കുന്ന ഭാഗങ്ങൾ: The chair's mechanisms are designed to be maintenance-free. Do not attempt to lubricate or disassemble moving parts.
പ്ലേസ്മെൻ്റ്: Avoid placing the chair in direct sunlight or near heat sources, as this can cause fabric fading or damage.

ട്രബിൾഷൂട്ടിംഗ്

If you experience issues with your Mega Motion Vance Ultimate Power Recliner Chair, refer to the following common solutions:

പ്രശ്നം	സാധ്യമായ കാരണം	പരിഹാരം
Chair does not operate.	Power cord unplugged, circuit breaker tripped, handwand disconnected.	Ensure power cord is securely plugged into a working outlet. Check circuit breaker. Verify handwand cable is firmly connected to the chair.
Chair moves slowly or intermittently.	Low battery in backup system (if applicable), power supply issue.	Check and replace batteries in the emergency backup system. Ensure the chair is connected to a stable power source.
പ്രവർത്തന സമയത്ത് അസാധാരണമായ ശബ്ദങ്ങൾ.	Obstruction in mechanism, loose components.	Inspect for any objects obstructing the moving parts. Ensure all assembly connections are secure. If noise persists, contact customer support.

If these steps do not resolve the issue, please contact Mega Motion customer support for further assistance.

ഉൽപ്പന്ന സവിശേഷതകൾ

Diagram showing features and benefits of AS-7001 recliner with dimensions and fabric options

Figure 5: Key features and dimensional specifications of the Mega Motion Vance Power Recliner Chair.

മോഡൽ: NM7001 (also referred to as AS-7001 in some documentation)
ഭാരം ശേഷി: 500 പൗണ്ട് (227 കി.ഗ്രാം)
സ്ഥാനങ്ങൾ: 3-position, all-electric lift and recline
നിർമ്മാണം: Heavy-duty, furniture-grade hardwood/plywood frame
തുണി: Heavy-duty polyester knit fabric (Cafe Finish/Walnut)
മെക്കാനിസം: Counter-balanced recliner mechanism for smooth, quiet operation
ഫീച്ചറുകൾ: Split back design, chaise seat, integrated emergency battery backup, adjustable steel leg levelers, convenient side pocket with USB port in handwand.
Product Dimensions (Approximate):
- Overall Dimensions: 44"D x 39.5"W x 44"H
- Outside Arm Width: 39.5"
- Arm Height from Seat: 6.5"
- Seat Width: 27"
- Seat to Floor: 20"
- Seat Depth: 20.5"
- Top of Back to Seat: 27"
- Top of Back to Floor: 43.5"
Overall Chair Weight: 143 പൗണ്ട് (64.8 കി.ഗ്രാം)

വാറൻ്റി വിവരങ്ങൾ

Mega Motion provides the following warranty for the Vance Ultimate Power Recliner Chair, model NM7001:

ഭാഗങ്ങളും സേവനവും: 1 വർഷത്തെ പരിമിത വാറന്റി.
ലിഫ്റ്റ് ഫ്രെയിം: Lifetime limited warranty.

Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the documentation included with your purchase or contact Mega Motion customer support.

ഉപഭോക്തൃ പിന്തുണ

For further assistance, technical support, or warranty inquiries regarding your Mega Motion Vance Ultimate Power Recliner Chair, please contact Mega Motion customer service.

ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ:

Webസൈറ്റ്: Visit the official Mega Motion webപിന്തുണാ ഉറവിടങ്ങൾക്കും ബന്ധപ്പെടാനുള്ള വിശദാംശങ്ങൾക്കുമുള്ള സൈറ്റ്.
ഫോൺ: Refer to your product packaging or the Mega Motion webഏറ്റവും പുതിയ ഉപഭോക്തൃ സേവന ഫോൺ നമ്പറിനായുള്ള സൈറ്റ്.

When contacting support, please have your model number (NM7001) and proof of purchase readily available.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.