Lightolier FBPPL-26 Emergency Lighting Ballast User Manual

1. ആമുഖം

This manual provides essential information for the safe and effective installation, operation, and maintenance of the Lightolier FBPPL-26 Compact Fluorescent Emergency Lighting Ballast. Please read these instructions thoroughly before proceeding with installation or use. Retain this manual for future reference.

2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ

WARNING: Risk of electric shock. Installation and servicing should be performed by qualified personnel only.

Always disconnect power at the circuit breaker before installing or servicing the unit.
This emergency ballast is designed for use with one 18-26 watt 2-pin compact fluorescent lamp with an integral starter.
The unit must be used with grounded, UL Listed indoor fixtures, except in heated air outlets or hazardous locations.
Ensure the ballast case is properly grounded during installation.
Do not mate the connector until installation is complete and AC power is supplied to the unit.
ഈ ഉപകരണം ഉദ്ദേശിച്ച ഉദ്ദേശ്യത്തിനല്ലാതെ മറ്റൊന്നിനായി ഉപയോഗിക്കരുത്.

Refer to all local and national electrical codes for proper installation procedures.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Lightolier FBPPL-26 is a compact fluorescent emergency lighting ballast designed to provide temporary illumination during power outages. When AC power is present, the ballast charges its internal battery. Upon loss of AC power, the unit automatically switches to emergency mode, powering a compatible fluorescent lamp ഒരു നിശ്ചിത കാലയളവിലേക്ക്.

Lightolier FBPPL-26 Emergency Ballast label showing 'CHLORIDE SYSTEMS' and 'FLEX A' markings, along with caution text and electrical ratings.

ചിത്രം 1: Front label of the Lightolier FBPPL-26 emergency ballast, indicating manufacturer details, input voltagഇ, വാട്ട്tage, and safety cautions. It specifies the unit is for 120/277 VAC, 60Hz, 3.5 Watts, and uses a 3.6V High Temp Ni-Cad battery.

Lightolier FBPPL-26 Emergency Ballast label showing 'CFPPL-26 SERIES D' and 'FLEX B' markings, along with recycling information and UL Listed certification.

ചിത്രം 2: Rear label of the Lightolier FBPPL-26 emergency ballast, detailing the model series, electrical ratings, battery recycling information, and UL Listing. It also states the unit operates the lamp for 90 minutes during emergency mode.

4 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർ	വിശദാംശങ്ങൾ
മോഡൽ നമ്പർ	FBPPL26
നിർമ്മാതാവ്	Lightolier (Chloride Systems)
ഇൻപുട്ട് വോളിയംtage	120 / 277 VAC
ആവൃത്തി	60 Hz
വൈദ്യുതി ഉപഭോഗം	3.5 വാട്ട്സ്
അനുയോജ്യമായ എൽamp വാട്ട്tage	18-26 Watts (2-pin compact fluorescent with integral starter)
അടിയന്തര പ്രവർത്തന സമയം	90 മിനിറ്റ്
ബാറ്ററി തരം	3.6V High Temp Ni-Cad
അളവുകൾ (L x W x H)	9 x 2.5 x 1.4 ഇഞ്ച്
ഭാരം	4 പൗണ്ട്
മെറ്റീരിയൽ	Copper (internal components), Black finish

5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Installation of the Lightolier FBPPL-26 emergency ballast requires knowledge of electrical systems. It is recommended that installation be performed by a qualified electrician in accordance with the National Electrical Code (NEC) and all applicable local codes.

5.1 പ്രീ-ഇൻസ്റ്റലേഷൻ പരിശോധനകൾ

ഇൻപുട്ട് വോളിയം ആണെന്ന് പരിശോധിക്കുകtage (120/277 VAC) matches the building's electrical supply.
Ensure the fixture intended for emergency lighting is compatible with a 2-pin compact fluorescent lamp (18-26W) with an integral starter.
Confirm that the installation location is indoors and not in heated air outlets or hazardous environments.

5.2 വയറിംഗ് നിർദ്ദേശങ്ങൾ

പവർ വിച്ഛേദിക്കുക: Turn off power to the fixture at the circuit breaker before beginning any wiring.
മൗണ്ടിംഗ്: Securely mount the emergency ballast within the fixture or in an accessible location near the fixture, ensuring proper ventilation.
ഗ്രൗണ്ടിംഗ്: Connect the ballast's ground wire to the fixture's ground or an approved earth ground. The ballast case must be grounded.
എസി ഇൻപുട്ട് വയറിംഗ്: Connect the ballast's AC input wires to the unswitched AC supply wires (120V or 277V, as appropriate). This allows the battery to charge continuously.
Lamp വയറിംഗ്: Wire the ballast to the compatible 2-pin compact fluorescent lamp according to the wiring diagram provided with the ballast (not included in this general manual, refer to product packaging).
അന്തിമ കണക്ഷൻ: Only after all other wiring is complete and AC power is supplied to the unit, mate the connector between the ballast and the lamp സർക്യൂട്ട്.

കുറിപ്പ്: A test switch (not included with ballast) is typically installed to allow for manual testing of the emergency function without interrupting the main power supply.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Lightolier FBPPL-26 emergency ballast operates automatically.

സാധാരണ പ്രവർത്തനം: When AC power is present, the ballast's battery charges. The connected fluorescent lamp operates normally via the fixture's standard ballast.
അടിയന്തര പ്രവർത്തനം: In the event of an AC power failure, the emergency ballast automatically detects the power loss and switches to battery power. It will then illuminate the connected fluorescent lamp for a minimum of 90 minutes.
റീചാർജ്: Once AC power is restored, the emergency ballast automatically reverts to charging mode, preparing for the next power interruption. A full recharge typically takes 24 hours.

6.1 പരിശോധന

Regular testing is crucial to ensure the emergency lighting system is functional. Perform tests in accordance with local fire and safety codes (e.g., monthly 30-second tests, annual 90-minute tests).

To test, activate the test switch (if installed) or temporarily disconnect AC power to the fixture.
Observe that the emergency lamp പ്രകാശിപ്പിക്കുന്നു.
After the test, restore AC power and ensure the charging indicator (if present on the test switch) is active.

7. പരിപാലനം

The Lightolier FBPPL-26 emergency ballast requires minimal maintenance, primarily focusing on battery care and regular testing.

ബാറ്ററി: The unit contains a 3.6V High Temp Ni-Cad battery. Nickel-Cadmium batteries must be recycled or disposed of properly at the end of their service life. Do not dispose of in regular waste.
വൃത്തിയാക്കൽ: Keep the ballast and fixture clean and free from dust and debris to ensure proper heat dissipation. Use a dry, non-abrasive cloth.
പരിശോധന: Periodically inspect the unit for any visible damage, loose connections, or signs of overheating.
ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: Ni-Cad batteries have a finite lifespan. If the unit fails to provide 90 minutes of emergency illumination during testing, the battery may need replacement. Contact a qualified technician for battery replacement.

8. പ്രശ്‌നപരിഹാരം

If the emergency lighting system does not function as expected, refer to the following troubleshooting guide:

പ്രശ്നം	സാധ്യമായ കാരണം	പരിഹാരം
എമർജൻസി എൽamp does not illuminate during power outage/test.	No AC power to ballast. Battery not charged or defective. Lamp തെറ്റായ. വയറിംഗ് പിശക്. Ballast failure.	Check circuit breaker and AC connections. Allow 24 hours for initial charge. If still fails, battery may need replacement. Replace fluorescent lamp. എല്ലാ വയറിംഗ് കണക്ഷനുകളും സുരക്ഷിതവും കൃത്യവുമാണെന്ന് ഉറപ്പാക്കുക. യോഗ്യതയുള്ള സേവന ഉദ്യോഗസ്ഥരുമായി ബന്ധപ്പെടുക.
എമർജൻസി എൽamp illuminates for less than 90 minutes.	ബാറ്ററി പൂർണ്ണമായി ചാർജ് ചെയ്തിട്ടില്ല. ബാറ്ററി ലൈഫ് അവസാനിക്കാൻ പോകുന്നു.	Ensure continuous AC power for 24 hours to fully charge. Battery may need replacement. Contact qualified service personnel.
സാധാരണ എൽamp operation is affected (flickering, dim).	തെറ്റായ വയറിംഗ്. Incompatible lamp. Fixture's standard ballast issue.	Review വയറിംഗ് ഡയഗ്രം. ഉറപ്പാക്കുക എൽamp is 2-pin compact fluorescent (18-26W) with integral starter. Consult fixture manufacturer's guide.

For issues not resolved by the above steps, contact a qualified electrician or Lightolier customer support.

9. വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support regarding your Lightolier FBPPL-26 emergency lighting ballast, please refer to the documentation provided at the time of purchase or contact Lightolier customer service directly. Contact details can typically be found on the manufacturer's official webസൈറ്റ് അല്ലെങ്കിൽ ഉൽപ്പന്ന പാക്കേജിംഗ്.

When contacting support, please have your product model number (FBPPL26) and date of purchase available.