BGNing 2212 2200KV Brushless Motor and 30A ESC Controller Instruction Manual

1. ആമുഖം

This manual provides essential instructions for the safe and effective use of your BGNing 2212 2200KV Brushless Motor and 30A Electronic Speed Controller (ESC). This combination is designed for various remote-controlled aircraft, including drones, quadcopters, and multi-copters. Please read this manual thoroughly before installation and operation to ensure optimal performance and safety.

2. ഉൽപ്പന്ന സവിശേഷതകൾ

• ഉയർന്ന പ്രവർത്തനക്ഷമതയുള്ള മോട്ടോർ: 2212 2200KV Brushless Outrunner Motor.
• കാര്യക്ഷമമായ പവർ ഡെലിവറി: Max Efficiency of 80%.
• കോംപാക്റ്റ് ഡിസൈൻ: Motor Dimensions of 27.5 x 30mm.
• Integrated Speed Control: DT-30A Brushless ESC for precise motor management.
• വൈഡ് വോളിയംtagഇ അനുയോജ്യത: Supports 2-3S Li-Poly batteries for the motor, and 2-4S LiPo for the ESC.

3. പാക്കേജ് ഉള്ളടക്കം

താഴെ കൊടുത്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• 1x BGNing 2212 2200KV Brushless Motor
• 1x BGNing DT-30A Brushless Electronic Speed Controller (ESC)
• 1x Motor Mount (X-type)
• 1x Propeller Adapter (Bullet type)
• 4x മൗണ്ടിംഗ് സ്ക്രൂകൾ

ചിത്രം 3.1: Complete package contents including the motor, ESC, mount, and propeller adapter.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

4.1 മോട്ടോർ ഇൻസ്റ്റലേഷൻ

1. Attach the X-type motor mount to the base of the motor using the provided screws.
2. Secure the motor assembly to your aircraft frame using appropriate hardware (not included, specific to your frame).
3. Install the propeller adapter onto the motor shaft.

ചിത്രം 4.1: വിവിധ views of the 2212 2200KV Brushless Motor, highlighting its construction and wiring.

4.2 ESC Connection

Connect the three motor wires to the three output wires of the ESC. The order of connection may affect motor rotation direction. If the motor spins in the wrong direction, swap any two of the three motor wires.

ചിത്രം 4.2: The 30A Electronic Speed Controller (ESC) with its wiring connections.

4.3 ESC കാലിബ്രേഷൻ നടപടിക്രമം

The Electronic Speed Controller (ESC) requires calibration before its first use to synchronize with your remote control's throttle range. Follow these steps carefully:

1. സുരക്ഷ ആദ്യം: DO NOT install propellers on the motor during calibration. This is crucial for safety.
2. Turn on your remote control and set the throttle stick to its highest position.
3. Connect the battery to the ESC. You will hear a slow beep sound.
4. Immediately disconnect the battery from the ESC after hearing the slow beep.
5. Reconnect the battery to the ESC. You will hear two distinct beeps.
6. Once the two beeps are heard, immediately move the throttle stick on your remote control to its lowest position.
7. You will then hear a long beep, indicating successful calibration.
8. Disconnect the battery from the ESC and turn off your remote control. The ESC calibration is now complete.

The ESC is pre-programmed by the manufacturer and does not require additional programming beyond this calibration.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

After successful installation and ESC calibration, you can proceed with operating your motor and ESC system.

1. എല്ലാ കണക്ഷനുകളും സുരക്ഷിതവും കൃത്യവുമാണെന്ന് ഉറപ്പാക്കുക.
2. Attach propellers securely to the motor shafts, ensuring correct rotation direction for your aircraft.
3. Turn on your remote control.
4. Connect the battery to the ESC. The ESC will initialize, and you should hear a series of beeps.
5. Slowly advance the throttle on your remote control to start the motor.
6. Always operate in a safe environment, away from people and obstacles.

മുന്നറിയിപ്പ്: Always exercise extreme caution when operating RC aircraft. Propellers can cause serious injury. Keep hands and face clear of rotating propellers.

6. പരിപാലനം

Regular maintenance ensures the longevity and reliable performance of your motor and ESC.

• ബെയറിംഗ് ലൂബ്രിക്കേഷൻ: Periodically lubricate the motor bearings (e.g., every 6-8 flights) with a suitable lubricant to reduce wear and extend motor life.
• കണക്ഷൻ പരിശോധന: Regularly check all electrical connections (motor to ESC, ESC to battery, ESC to receiver) for secure fit and signs of corrosion or damage.
• ശുചിത്വം: Keep the motor and ESC free from dirt, dust, and moisture. Use compressed air or a soft brush for cleaning.
• ശാരീരിക ക്ഷതം: Inspect the motor and ESC for any physical damage after each use, especially after hard landings or crashes.

7. പ്രശ്‌നപരിഹാരം

കുറിപ്പ്: If the motor or ESC fails to disengage when the propeller is blocked (e.g., during a crash), immediately cut the throttle to prevent damage to components.

8 സ്പെസിഫിക്കേഷനുകൾ

8.1 Motor Specifications (2212 2200KV)

• KV Rating: 2200കെ.വി
• പരമാവധി കാര്യക്ഷമത: 80%
• Max Efficiency Current: 4-10A (>75%)
• നിലവിലെ ശേഷി: 12A/60സെ
• No Load Current @ 10V: 0.5എ
• Number of Cells (Li-Poly): 2-3S (7.4V - 11.1V)
• Motor Dimensions: 27.5 x 30 മിമി
• ഷാഫ്റ്റ് വ്യാസം: 3.17 മി.മീ
• ഭാരം: Approximately 0.1 kg (100 grams)

8.2 ESC Specifications (DT-30A)

• തുടർച്ചയായ പ്രവാഹം: 30എ
• ബേസ്റ്റ് കറൻ്റ്: Not specified (typically higher than continuous for short periods)
• BEC put ട്ട്‌പുട്ട്: 5V/3A
• Number of Cells (LiPo): 2-4S (7.4V - 14.8V)
• ഫേംവെയർ: Simonk Firmware

9. വാറൻ്റിയും പിന്തുണയും

This product typically comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact your retailer or the manufacturer directly. Refer to the product packaging or the retailer's webബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കുള്ള സൈറ്റ്.