LaView LV-PB932F4 IP Bullet Security Camera User Manual

1. ആമുഖം

This manual provides instructions for the LaView LV-PB932F4 IP Bullet Camera. This camera is designed for surveillance applications, offering 1080P HD resolution for both indoor and outdoor use. It features day and night vision capabilities, with infrared (IR) night vision up to 100 feet. The camera is weatherproof with an IP66 rating and operates in temperatures from -13°F to 140°F (-25°C to 60°C).

ചിത്രം 1.1: ലാView LV-PB932F4 IP Bullet Camera features.

2. പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• 1 x ലView LV-PB932F4 2MP 1080P IP Bullet Camera
• (Additional accessories such as mounting screws, anchors, and Ethernet cable may vary by package and are often sold separately.)

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

3.1 ഇൻസ്റ്റലേഷന് മുമ്പ്

Ensure your Network Video Recorder (NVR) system is compatible with IP 2MP cameras. Plan the camera's placement to maximize coverage and minimize obstructions.

3.2 ഫിസിക്കൽ ഇൻസ്റ്റലേഷൻ

The camera is designed for wall mounting. Select a suitable location that provides the desired field of view and protection from direct impact.

മൗണ്ടിംഗ് ഘട്ടങ്ങൾ:

1. Mark drilling points using the camera's base as a template.
2. Drill pilot holes appropriate for your mounting surface.
3. Secure the camera to the mounting surface using appropriate screws and anchors (not included).
4. ഒപ്റ്റിമൽ കവറേജിനായി ക്യാമറ ആംഗിൾ ക്രമീകരിക്കുക.

3.3 കണക്ഷൻ

This camera utilizes Power over Ethernet (PoE) for simplified installation. A single network cable provides both power and data connection.

1. Connect one end of an Ethernet cable (Cat 5e or Cat 6 recommended) to the camera's Ethernet port.
2. Connect the other end of the Ethernet cable to a PoE-enabled port on your NVR or a PoE switch.
3. The camera should automatically power on and attempt to connect to your NVR system.

കുറിപ്പ്: For systems that do not automatically configure, refer to your NVR's manual for adding IP cameras and network configuration.

ചിത്രം 3.1: മുൻഭാഗം view of the camera lens and IR LEDs.

4. ഓപ്പറേഷൻ

4.1 പകൽ/രാത്രി ദർശനം

The camera automatically switches between day (color) and night (black and white, infrared) modes based on ambient light conditions. In night mode, the camera's infrared LEDs activate to provide visibility up to 100 feet in darkness.

4.2 മോഷൻ ഡിറ്റക്ഷൻ

The camera supports motion detection. Configuration of motion detection zones and sensitivity settings is typically done through your connected NVR system's interface. Refer to your NVR's manual for detailed instructions on setting up motion alerts and recording triggers.

4.3 വീഡിയോ റെക്കോർഡിംഗും പ്ലേബാക്കും

Video recording and playback functions are managed by your NVR system. Consult your NVR's user manual for instructions on accessing live view, configuring recording schedules, and reviewഇൻ റെക്കോർഡ് ഫൂtage.

5. പരിപാലനം

To ensure optimal performance and longevity of your camera, follow these maintenance guidelines:

• വൃത്തിയാക്കൽ: ക്യാമറ ലെൻസ് ഇടയ്ക്കിടെ മൃദുവായ, ഡി-ടച്ച് ഉപയോഗിച്ച് വൃത്തിയാക്കുക.amp cloth. Avoid abrasive cleaners or solvents that could damage the lens coating.
• കേബിൾ പരിശോധന: Regularly inspect all cables for damage, wear, or loose connections.
• ഫേംവെയർ അപ്‌ഡേറ്റുകൾ: Check the official LaView website for any available firmware updates for your camera model. Firmware updates can improve performance, enhance security, and add new features.
• പരിസ്ഥിതി സംരക്ഷണം: While the camera is IP66 weatherproof, extreme environmental conditions (e.g., direct lightning strikes, prolonged submersion, or corrosive environments) should be avoided.

6. പ്രശ്‌നപരിഹാരം

6.1 No Image/Video Signal

• പവർ പരിശോധിക്കുക: Ensure the camera is receiving power via the PoE connection. Verify the Ethernet cable is securely connected to both the camera and the PoE source (NVR/switch).
• നെറ്റ്‌വർക്ക് കണക്ഷൻ പരിശോധിക്കുക: Confirm the Ethernet cable is not damaged. Try a different port on your NVR/switch.
• എൻ‌വി‌ആർ അനുയോജ്യത: Ensure your NVR system is compatible with 2MP IP cameras.
• IP വിലാസ വൈരുദ്ധ്യം: If manually configuring, check for IP address conflicts on your network.

6.2 മോശം ഇമേജ് നിലവാരം

• ക്ലീൻ ലെൻസ്: Clean the camera lens for any dirt, dust, or smudges.
• ലൈറ്റിംഗ് വ്യവസ്ഥകൾ: Ensure adequate lighting for optimal image quality. In low light, the camera will automatically switch to IR night vision.
• റെസല്യൂഷൻ ക്രമീകരണങ്ങൾ: Verify the video resolution settings on your NVR are set to 1080P or higher, if supported by your NVR.

6.3 Night Vision Not Working

• IR LED- കൾ: In dark conditions, check if the infrared LEDs are illuminating. They may emit a faint red glow.
• തടസ്സങ്ങൾ: Ensure there are no obstructions directly in front of the camera that could block the IR light.

6.4 മോഷൻ ഡിറ്റക്ഷൻ പ്രശ്നങ്ങൾ

• സെൻസിറ്റിവിറ്റി ക്രമീകരണങ്ങൾ: Adjust the motion detection sensitivity on your NVR. High sensitivity can lead to false alarms (e.g., from insects, moving branches).
• കണ്ടെത്തൽ മേഖലകൾ: Verify that the motion detection zones are correctly configured to cover the desired areas.

7 സാങ്കേതിക സവിശേഷതകൾ

8. വാറൻ്റിയും പിന്തുണയും

8.1 വാറൻ്റി വിവരങ്ങൾ

This LaView product is covered by a 2-year manufacturer's warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

8.2 സാങ്കേതിക പിന്തുണ

For technical assistance or support, please visit the official LaView website or contact their customer service. Lifetime technical support is provided to assist with setup, operation, and troubleshooting.

LaView ഉദ്യോഗസ്ഥൻ Webസൈറ്റ്: www.laviewsecurity.com