APOLLO APXV3434 3/4 Inch PEX Brass Ball Valve User Manual

1. ആമുഖം

The APOLLO APXV3434 is a 3/4 inch PEX Brass Ball Valve designed for reliable flow control in plumbing systems. This quarter-turn valve is suitable for both new construction and remodeling projects, offering quick and secure connections without the need for flames, glues, fluxes, or solvents.

പ്രധാന സവിശേഷതകൾ:

• 3/4 inch diameter for standard PEX pipe applications.
• Designed for use with Apollo PEX pipe.
• Provides quick and mess-free connections.
• Brass body construction for durability.
• NSF Approved and meets ASTM F1807 standards.

2 സുരക്ഷാ വിവരങ്ങൾ

Please read and understand all instructions before installation and operation. Failure to follow these instructions may result in property damage, personal injury, or death.

• ഇൻസ്റ്റാളേഷൻ സമയത്ത് സുരക്ഷാ ഗ്ലാസുകളും കയ്യുറകളും ഉൾപ്പെടെയുള്ള ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (പിപിഇ) എല്ലായ്പ്പോഴും ധരിക്കുക.
• Ensure the water supply is turned off and the system is depressurized before beginning any installation or maintenance.
• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (California Proposition 65 Warning). Wash hands after handling.
• Do not use this valve for applications exceeding its specified temperature and pressure ratings (32 - 180°F).

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

This valve is designed for crimp-style PEX connections. Ensure you have the correct PEX crimping tools and PEX pipe for a secure installation.

3.1. തയ്യാറാക്കൽ

1. വാൽവ് സ്ഥാപിക്കുന്ന സ്ഥലത്തേക്കുള്ള പ്രധാന ജലവിതരണം ഓഫാക്കുക.
2. Drain the water from the pipes to relieve pressure.
3. Gather all necessary tools: PEX pipe cutter, PEX crimping tool, PEX crimp rings, and Apollo PEX pipe.
4. Inspect the valve for any visible damage before installation.

3.2 ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ

1. Cut the PEX pipe to the desired length using a PEX pipe cutter, ensuring a clean, square cut.
2. Slide a PEX crimp ring onto the PEX pipe.
3. Insert the PEX pipe fully onto the valve's PEX barb fitting. Ensure the pipe is seated against the shoulder of the fitting.
4. Position the crimp ring over the barb fitting, approximately 1/8 inch from the end of the pipe.
5. Using the PEX crimping tool, crimp the ring firmly. Ensure the crimp is complete and secure according to the crimping tool manufacturer's instructions.
6. Repeat the process for the other side of the valve.
7. Once both connections are made, slowly turn on the water supply and check for leaks.

Figure 1: APOLLO 3/4 Inch PEX Brass Ball Valve. This image shows the valve with its white handle in the closed position, ready for PEX pipe connections on both ends.

Figure 2: APOLLO 3/4 Inch PEX Brass Ball Valve, showing the NSF approval marking on the handle. The valve is depicted with its PEX crimp connections.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The APOLLO APXV3434 is a quarter-turn ball valve, meaning it requires only a 90-degree rotation of the handle to fully open or close the flow.

• To Open the Valve: Rotate the handle so it is parallel with the direction of the pipe. This allows full flow through the valve.
• To Close the Valve: Rotate the handle 90 degrees so it is perpendicular to the direction of the pipe. This stops the flow completely.

5. പരിപാലനം

The APOLLO APXV3434 ball valve is designed for long-term, maintenance-free operation under normal conditions. However, periodic inspection is recommended.

• വാർഷിക പരിശോധന: ചോർച്ച, നാശം അല്ലെങ്കിൽ കേടുപാടുകൾ എന്നിവയുടെ ലക്ഷണങ്ങൾക്കായി വാൽവും കണക്ഷനുകളും ദൃശ്യപരമായി പരിശോധിക്കുക.
• ഓപ്പറേഷൻ ചെക്ക്: Periodically operate the valve (open and close it fully) to ensure smooth movement and prevent seizing, especially in systems that remain open or closed for extended periods.
• വൃത്തിയാക്കൽ: If necessary, clean the exterior of the valve with a mild detergent and water. Do not use harsh chemicals or abrasive cleaners.

6. പ്രശ്‌നപരിഹാരം

Most issues with ball valves are related to improper installation or extreme operating conditions.

• കണക്ഷനുകളിലെ ചോർച്ച: Ensure PEX crimp rings are properly seated and crimped. Re-crimp if necessary, or replace the crimp ring and re-crimp. Verify the PEX pipe is fully inserted onto the barb fitting.
• Difficulty Turning Handle: If the valve handle is stiff, it may be due to mineral buildup or infrequent use. Operating the valve several times may free it. If it remains stiff or seizes, the valve may need replacement.
• കുറഞ്ഞ ഒഴുക്ക്: Check for obstructions in the pipe system upstream or downstream of the valve. Ensure the valve is fully open (handle parallel to the pipe).

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

For specific warranty information or technical support regarding your APOLLO APXV3434 3/4 Inch PEX Brass Ball Valve, please contact APOLLO customer service directly. Refer to the product packaging or the official APOLLO webഏറ്റവും പുതിയ കോൺടാക്റ്റ് വിശദാംശങ്ങളും വാറന്റി നിബന്ധനകളും അറിയാൻ സൈറ്റ് സന്ദർശിക്കുക.