Datalogic QW2120-BKK1S

Datalogic QW2120-BKK1S QuickScan Lite Imager

ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

This manual provides essential instructions for the proper setup, operation, and maintenance of your Datalogic QW2120-BKK1S QuickScan Lite Imager. The QW2120-BKK1S is a linear imager designed for efficient barcode scanning, featuring a USB interface for easy connectivity to host devices.

2. പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ ഉൽപ്പന്ന പാക്കേജിൽ ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

  • Datalogic QW2120-BKK1S QuickScan Lite Imager (Scanner Unit)
  • USB Cable (Part Number 90A052044)
  • Stand (Model Standard-QW20-BK)
Datalogic QW2120-BKK1S QuickScan Lite Imager with USB cable and stand

An image showing the Datalogic QW2120-BKK1S QuickScan Lite Imager, its USB cable, and the accompanying stand.

3. സജ്ജീകരണം

3.1 സ്കാനർ ബന്ധിപ്പിക്കുന്നു

  1. Insert the smaller end of the USB cable into the USB port located at the base of the QuickScan Lite Imager.
  2. Connect the larger end of the USB cable into an available USB port on your host device (e.g., desktop computer, laptop).
  3. The scanner will power on, and your operating system should automatically detect and install the necessary drivers. This process may take a few moments.

3.2 Placing the Scanner on the Stand

The included stand allows for hands-free operation. Carefully place the scanner into the stand, ensuring it is securely seated. The stand is designed to hold the scanner at an optimal angle for presentation scanning.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 അടിസ്ഥാന സ്കാനിംഗ്

ഒരു ബാർകോഡ് സ്കാൻ ചെയ്യാൻ:

  1. ലക്ഷ്യം: Point the scanner's light beam at the center of the barcode.
  2. സ്കാൻ ചെയ്യുക: Press and hold the trigger button (if operating in trigger mode) or present the barcode to the scanner (if operating in presentation mode with the stand).
  3. സ്ഥിരീകരിക്കുക: A successful scan is typically indicated by an audible beep and/or a green LED illumination on the scanner. The decoded data will be transmitted to your host device.

4.2 Scanning Tips

  • Ensure the barcode is clean and undamaged.
  • Maintain an appropriate distance from the barcode; typically, a few inches is sufficient.
  • Avoid scanning at extreme angles to prevent read errors.

4.3 വിപുലമായ കോൺഫിഗറേഷൻ

For advanced settings such as enabling/disabling specific barcode symbologies, data formatting, or interface options, refer to the comprehensive programming guide available on the Datalogic website. These configurations are typically performed by scanning a series of special programming barcodes.

5. പരിപാലനം

5.1 സ്കാനർ വൃത്തിയാക്കൽ

To ensure optimal performance, keep the scanner's reading window clean.

  • നനവില്ലാത്തതും ലിനില്ലാത്തതുമായ തുണി ചെറുതായി ഉപയോഗിക്കുകampവെള്ളം അല്ലെങ്കിൽ നേരിയതും, ഉരച്ചിലുകളില്ലാത്തതുമായ ക്ലീനിംഗ് ലായനി ഉപയോഗിച്ച് നനയ്ക്കുക.
  • കഠിനമായ രാസവസ്തുക്കളോ, ലായകങ്ങളോ, അല്ലെങ്കിൽ ഉരച്ചിലുകളുള്ള വസ്തുക്കളോ ഉപയോഗിക്കരുത്, കാരണം ഇവ സ്കാനറിന്റെ സിക്ക് കേടുവരുത്തും.asing or reading window.
  • Avoid spraying liquids directly onto the scanner.

5.2 സംഭരണം

ഉപയോഗത്തിലില്ലാത്തപ്പോൾ, സ്കാനർ വൃത്തിയുള്ളതും വരണ്ടതുമായ അന്തരീക്ഷത്തിൽ സൂക്ഷിക്കുക, കടുത്ത താപനിലയിൽ നിന്നും നേരിട്ടുള്ള സൂര്യപ്രകാശത്തിൽ നിന്നും അകറ്റി നിർത്തുക.

6. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
സ്കാനർ ഓണാക്കുന്നില്ലLoose USB cable connection; Faulty USB portEnsure USB cable is securely connected to both scanner and host device. Try a different USB port or host device.
Scanner not reading barcodesBarcode damaged or poor quality; Incorrect scanning distance/angle; Symbology disabledCheck barcode quality. Adjust scanning distance and angle. Refer to the programming guide to ensure the required barcode symbology is enabled.
ഹോസ്റ്റ് ഉപകരണത്തിലേക്ക് ഡാറ്റയൊന്നും കൈമാറിയില്ല.USB connection issue; Host device not recognizing scannerVerify USB cable connection. Check device manager on your host device to see if the scanner is recognized. Reinstall drivers if necessary.
Incorrect data transmittedIncorrect configuration settingsRefer to the programming guide to review and adjust data formatting or other configuration settings.

7 സ്പെസിഫിക്കേഷനുകൾ

  • മോഡൽ നമ്പർ: QW2120-BKK1S
  • കണക്റ്റിവിറ്റി ടെക്നോളജി: USB കേബിൾ
  • ഊർജ്ജ സ്രോതസ്സ്: കോർഡഡ് ഇലക്ട്രിക്, യുഎസ്ബി കേബിൾ
  • അനുയോജ്യമായ ഉപകരണങ്ങൾ: ഡെസ്ക്ടോപ്പ്, ലാപ്ടോപ്പ്
  • ഇനത്തിൻ്റെ ഭാരം: 1 പൗണ്ട്
  • പാക്കേജ് അളവുകൾ: 21 x 13 x 10 ഇഞ്ച്
  • നിർമ്മാതാവ്: Datalogic Scanning

8. വാറൻ്റിയും പിന്തുണയും

For detailed warranty information, please refer to the warranty card included with your product or visit the official Datalogic website. If you encounter issues not covered in this manual or require further assistance, please contact Datalogic customer support through their official channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.