WAC Lighting 3021-27WT

WAC Landscape Lighting Cone LED 12V Deck and Patio Light Instruction Manual

മോഡൽ: 3021-27WT

1 സുരക്ഷാ വിവരങ്ങൾ

Please read these instructions carefully before installation and retain them for future reference. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • ഇലക്ട്രിക്കൽ സുരക്ഷ: This product operates on a 12V AC/DC low voltage system. A compatible 12V magnetic or electronic power supply (transformer) is required and sold separately. Do not connect directly to 120V AC.
  • ഇൻസ്റ്റലേഷൻ: Installation should be performed by a qualified electrician or trained professional in accordance with local electrical codes. Ensure power is disconnected at the source before installation or servicing.
  • ഔട്ട്ഡോർ ഉപയോഗം: The fixture is IP66 rated, indicating protection against high-pressure water jets and outdoor elements. Ensure all connections are watertight using the provided gel-filled wire nuts.
  • മങ്ങുന്നു: For dimming functionality, use a Magnetic Low Voltage (MLV) dimmer (sold separately).
  • ഉൽപ്പന്ന സമഗ്രത: ഫിക്സ്ചറിൽ മാറ്റങ്ങൾ വരുത്തരുത്. ഏതെങ്കിലും മാറ്റങ്ങൾ വാറന്റി അസാധുവാക്കുകയും സുരക്ഷാ അപകടങ്ങൾ സൃഷ്ടിക്കുകയും ചെയ്തേക്കാം.

2. പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക.

  • WAC Landscape Lighting Cone LED Deck and Patio Light (Model 3021-27WT)
  • 3-foot lead wire (attached to fixture)
  • 2 x Ideal Direct Burial Wire Nuts (gel-filled)
  • Hardware Pack for Surface Mount
WAC Landscape Lighting Cone LED Deck and Patio Light, white, with attached wire and wire nuts

Image: The WAC Landscape Lighting Cone LED Deck and Patio Light in white, showing the attached lead wire and two gel-filled direct burial wire nuts.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

This fixture is designed for surface mounting on a flat surface, such as a 4x4 post or deck railing. A 12V AC/DC landscape lighting transformer (sold separately) is required.

3.1 ആവശ്യമായ ഉപകരണങ്ങൾ (ഉൾപ്പെടുത്തിയിട്ടില്ല)

  • ഡ്രിൽ
  • Drill bits appropriate for mounting surface and wire passage
  • സ്ക്രൂഡ്രൈവർ
  • വയർ സ്ട്രിപ്പറുകൾ
  • വാല്യംtagഇ ടെസ്റ്റർ

3.2 ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ

  1. പവർ വിച്ഛേദിക്കുക: Ensure the power supply to the landscape lighting system is turned off at the main breaker or transformer.
  2. മൗണ്ടിംഗ് ഉപരിതലം തയ്യാറാക്കുക: Select a suitable location for the light. The fixture is designed to fit cleanly on a 4x4 post without hanging off the sides. Mark the desired mounting points for the screws from the hardware pack.
  3. ഡ്രിൽ പൈലറ്റ് ദ്വാരങ്ങൾ: Drill pilot holes for the mounting screws. If routing the wire through the mounting surface, drill an additional hole for the lead wire.
  4. ഫിക്സ്ചർ മൌണ്ട് ചെയ്യുക: Secure the light fixture to the mounting surface using the provided hardware. Ensure it is firmly attached.
  5. വയറിംഗ് ബന്ധിപ്പിക്കുക:
    • Strip approximately 1/2 inch of insulation from the ends of the fixture's lead wire and the main low voltage landscape wire.
    • Twist the exposed copper wires together (one from the fixture to one from the main wire).
    • Secure each connection with a gel-filled direct burial wire nut. Twist the wire nut clockwise until tight. The gel inside the nut will seal the connection, protecting it from moisture.
    • Bury the wire connections underground or ensure they are otherwise protected and concealed.
  6. ട്രാൻസ്ഫോർമറുമായി ബന്ധിപ്പിക്കുക: Connect the main low voltage landscape wire to your 12V AC/DC landscape lighting transformer (sold separately). Refer to your transformer's manual for specific connection instructions.
  7. പവർ പുന ore സ്ഥാപിക്കുക: Once all connections are secure and properly insulated, restore power to the landscape lighting system.
WAC Landscape Lighting 12V Power Supply Transformer

ചിത്രം: ഉദാample of a WAC Landscape Lighting 12V power supply transformer, required for operation (sold separately).

വീഡിയോ: ഒരു ഓവർview of WAC Deck & Patio lights, demonstrating their design and suitability for various installations. This video provides visual context for the product line.

4. ഓപ്പറേഷൻ

The WAC Landscape Lighting Cone LED Deck and Patio Light operates automatically when connected to a compatible 12V landscape lighting system controlled by a timer or photocell (not included). The light will illuminate when power is supplied to the low voltagഇ സർക്യൂട്ട്.

  • പവർ ഓൺ/ഓഫ്: Control the light by turning the 12V landscape lighting transformer on or off.
  • മങ്ങുന്നു: If connected to a Magnetic Low Voltage (MLV) dimmer, the brightness can be adjusted smoothly and continuously down to 10% of its maximum output.
  • ലൈറ്റ് ഔട്ട്പുട്ട്: This model provides 2700K Warm LED light, offering a soft, inviting glow suitable for decks, patios, and pathways.
Comparison of 2700K Warm and 3000K Warm White LED light output

Image: A visual comparison showing the difference between 2700K Warm light (left) and 3000K Warm White light (right). This specific model emits 2700K Warm light.

5. പരിപാലനം

The WAC Landscape Lighting Cone LED Deck and Patio Light is designed for minimal maintenance. The built-in LED has a rated life of 50,000 hours.

  • വൃത്തിയാക്കൽ: ഇടയ്ക്കിടെ സോഫ്റ്റ്, ഡി ക്ലീനർ ഉപയോഗിച്ച് ഫിക്സ്ചർ വൃത്തിയാക്കുക.amp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents, as these can damage the finish or lens.
  • പരിശോധന: Annually inspect the wiring and connections for any signs of wear, damage, or corrosion. Ensure wire nuts remain securely fastened.
  • LED മാറ്റിസ്ഥാപിക്കൽ: The LED is built-in and not user-replaceable. If the LED fails within the warranty period, contact customer support.

6. പ്രശ്‌നപരിഹാരം

If your WAC Landscape Lighting Cone LED Deck and Patio Light is not functioning as expected, refer to the following common issues and solutions:

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ലൈറ്റ് ഓണാക്കില്ല.
  • ട്രാൻസ്ഫോർമറിന് വൈദ്യുതിയില്ല.
  • Loose or faulty wire connections.
  • തകരാറുള്ള ട്രാൻസ്ഫോർമർ.
  • Damaged fixture.
  • Check if the transformer is plugged in and receiving power. Verify circuit breaker.
  • Inspect all wire connections, ensuring they are tight and properly sealed with wire nuts.
  • Test the transformer output voltagഇ. ആവശ്യമെങ്കിൽ മാറ്റിസ്ഥാപിക്കുക.
  • If other lights on the same circuit work, the fixture may be faulty. Contact customer support.
വെളിച്ചം മിന്നിമറയുന്നു അല്ലെങ്കിൽ മങ്ങുന്നു.
  • Insufficient power from transformer.
  • അയഞ്ഞ വയർ കണക്ഷനുകൾ.
  • അനുയോജ്യമല്ലാത്ത ഡിമ്മർ.
  • Ensure the transformer wattage is sufficient for all connected lights.
  • എല്ലാ വയർ കണക്ഷനുകളും പരിശോധിച്ച് ശക്തമാക്കുക.
  • If using a dimmer, ensure it is a Magnetic Low Voltage (MLV) dimmer.
ഫിക്ചറിനുള്ളിൽ വെള്ളം.
  • തെറ്റായി സീൽ ചെയ്ത വയർ കണക്ഷനുകൾ.
  • Damage to the fixture housing.
  • Ensure wire nuts are twisted tightly and fully encapsulate the wire connection.
  • Inspect the fixture for cracks or damage. Contact customer support if damaged.

7 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
മോഡൽ നമ്പർ3021-27WT
ബ്രാൻഡ്WAC ലൈറ്റിംഗ്
ഉൽപ്പന്ന അളവുകൾ3.38" എൽ x 1.63" W x 3.21" എച്ച്
മെറ്റീരിയൽഅലുമിനിയം
നിറംവെള്ള
പ്രകാശ സ്രോതസ്സ്ബിൽറ്റ്-ഇൻ എൽഇഡി
ഇൻപുട്ട് വോളിയംtage9-15V എസി/ഡിസി
വൈദ്യുതി ഉപഭോഗം2.8W (4.6VA)
തെളിച്ചംUp to 60 Lumens (90 Lumens max)
വർണ്ണ താപനില2700K Warm LED
കളർ റെൻഡറിംഗ് ഇൻഡക്സ് (CRI)90
റേറ്റുചെയ്ത സമയം50,000 മണിക്കൂർ
മങ്ങുന്നുSmooth and continuous to 10% with MLV dimmer (sold separately)
IP റേറ്റിംഗ്IP66 (Factory sealed water tight)
സർട്ടിഫിക്കേഷനുകൾUL & cUL 1838, EPA, Energy Star, FCC
ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾFixture, 3ft lead wire, 2x direct burial wire nuts, hardware pack
Line drawing with dimensions of the WAC Cone LED Deck Light

Image: Technical line drawing showing the dimensions of the WAC Cone LED Deck and Patio Light.

8. വാറണ്ടിയും പിന്തുണയും

വാറൻ്റി: This WAC Landscape Lighting product is covered by a 10-year functional warranty and a 2-year finish warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

ഒഴിവാക്കലുകൾ: The warranty does not cover damage caused by improper installation, misuse, abuse, accidents, modifications, or acts of nature. It also does not cover normal wear and tear or consumable parts.

ഉപഭോക്തൃ പിന്തുണ: For technical assistance, warranty claims, or replacement parts, please contact WAC Lighting customer service. Have your model number (3021-27WT) and proof of purchase ready.

WAC Lighting Contact Information:

  • സന്ദർശിക്കുക WAC Lighting Store on Amazon കൂടുതൽ വിവരങ്ങൾക്ക്.
  • Refer to the official WAC Landscape Lighting webനേരിട്ട് ബന്ധപ്പെടാനുള്ള വിശദാംശങ്ങൾക്കായി സൈറ്റ്.

© 2024 WAC Lighting. All rights reserved.

This manual is for informational purposes only. WAC Lighting reserves the right to change product specifications without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.