Audix AP62 OM5 Dual Handheld Wireless Microphone System

1. ആമുഖം

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Audix AP62 OM5 Dual Handheld Wireless Microphone System. This system is designed for professional audio applications, offering reliable wireless performance with two OM5 handheld transmitters and an R62 two-channel diversity receiver.

Figure 1: Audix AP62 OM5 Dual Handheld Wireless Microphone System components, including the R62 receiver unit with antennas and two OM5 handheld microphones.

2. സജ്ജീകരണം

2.1 അൺപാക്കിംഗും പരിശോധനയും

Carefully unpack all components and inspect them for any signs of damage. Retain the packaging for future storage or transport. The system includes:

• 1 x Audix R62 Two-channel Diversity Receiver
• 2 x Audix OM5 Handheld Transmitters
• 2 x Receiver Antennas
• 1 x Power Supply for Receiver
• 1 x Padded Carrying Case

2.2 റിസീവർ കണക്ഷൻ

1. Place the R62 receiver on a stable surface, away from potential sources of interference (e.g., Wi-Fi routers, other wireless devices).
2. Attach the two included antennas to the antenna connectors on the rear of the receiver. Ensure they are securely tightened.
3. Connect the supplied power adapter to the DC input on the rear of the receiver and plug it into a suitable AC power outlet.
4. Connect the audio outputs (XLR or 1/4" jack) from the receiver to your mixer, PA system, or recording device.

2.3 ട്രാൻസ്മിറ്റർ ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

Each OM5 handheld transmitter requires two AA batteries (not included). For optimal performance, use high-quality alkaline or rechargeable batteries.

1. Unscrew the bottom cap of the OM5 handheld microphone to reveal the battery compartment.
2. കമ്പാർട്ടുമെന്റിനുള്ളിൽ സൂചിപ്പിച്ചിരിക്കുന്നതുപോലെ ശരിയായ പോളാരിറ്റി (+/-) നിരീക്ഷിച്ചുകൊണ്ട് രണ്ട് AA ബാറ്ററികൾ ഇടുക.
3. താഴെയുള്ള തൊപ്പി സുരക്ഷിതമായി സ്ക്രൂ ചെയ്യുക.

2.4 System Synchronization (SYNC)

To establish communication between the receiver and transmitters, they must be synchronized.

1. Power on the R62 receiver by pressing the power button on the front panel.
2. Power on one of the OM5 handheld transmitters by pressing and holding its power button.
3. On the receiver, press the "SYNC" button for the desired channel (Channel 1 or Channel 2). The SYNC indicator will flash.
4. Hold the OM5 transmitter with its IR window facing the IR sensor on the receiver (located near the SYNC button for each channel).
5. The SYNC indicator on the receiver will stop flashing and remain solid when synchronization is complete. The transmitter's display will show the synchronized frequency.
6. Repeat the process for the second OM5 handheld transmitter.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

3.1 പവർ ഓൺ/ഓഫ്

• റിസീവർ: മുൻ പാനലിലെ പവർ ബട്ടൺ അമർത്തുക.
• ട്രാൻസ്മിറ്ററുകൾ: Press and hold the power button on the handheld microphone. To power off, press and hold the power button again until the display turns off.

3.2 ചാനലും ഫ്രീക്വൻസി തിരഞ്ഞെടുക്കലും

The R62 receiver automatically selects optimal frequencies during synchronization. However, you can manually adjust channels if interference is encountered.

• On the receiver, use the "SET" button and navigation buttons (if available, based on model variant) to browse and select alternative channels for each receiver channel.
• After selecting a new channel on the receiver, you must re-synchronize the corresponding transmitter using the SYNC process described in Section 2.4.

ചിത്രം 2: ഉദാample of the OM5 handheld microphone display, showing frequency (e.g., 575.850 MHz) and channel information.

3.3 ഓഡിയോ ലെവൽ ക്രമീകരണം

Adjust the output level of the receiver using the volume controls on the front panel. Fine-tune the microphone input gain on your mixer or PA system for optimal sound quality and to prevent clipping.

3.4 ഉപയോഗ നുറുങ്ങുകൾ

• Maintain a clear line of sight between the receiver antennas and the transmitters for best performance.
• Avoid placing the receiver near large metal objects or other wireless devices that could cause interference.
• Regularly check the battery indicator on the transmitters and replace batteries when low to avoid unexpected power loss during use.
• For optimal vocal performance, hold the microphone approximately 1-6 inches from your mouth.

4. പരിപാലനം

4.1 വൃത്തിയാക്കൽ

• Wipe the receiver and transmitters with a soft, dry cloth.
• കഠിനമായ അഴുക്കിന്, അല്പം ഡിamp തുണി ഉപയോഗിക്കാം, തുടർന്ന് ഉടനടി ഉണക്കാം.
• അബ്രാസീവ് ക്ലീനറുകളോ, ലായകങ്ങളോ, കഠിനമായ രാസവസ്തുക്കളോ ഉപയോഗിക്കരുത്, കാരണം ഇവ ഫിനിഷിനും ആന്തരിക ഘടകങ്ങൾക്കും കേടുവരുത്തും.
• Periodically clean the microphone grille to remove debris.

4.2 ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

Replace batteries in the handheld transmitters as soon as the low battery indicator appears. Always dispose of used batteries responsibly according to local regulations.

4.3 സംഭരണം

When not in use, store the system in its padded carrying case in a cool, dry place, away from extreme temperatures and humidity. Remove batteries from transmitters if storing for extended periods to prevent leakage.

5. പ്രശ്‌നപരിഹാരം

6 സ്പെസിഫിക്കേഷനുകൾ

Note: Specifications are subject to change without notice. For the most current information, please refer to the official Audix webസൈറ്റ്.

7. വാറൻ്റിയും പിന്തുണയും

Audix products are manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Audix webസൈറ്റ്.

For technical support, service, or replacement parts, please contact Audix customer service or your authorized Audix dealer. When contacting support, please have your product model number (AP62OM5) and serial number ready.

ഓൺലൈൻ ഉറവിടങ്ങൾ: www.audixusa.com