YAESU SP-20

YAESU SP-20 External Speaker Instruction Manual

മോഡൽ: SP-20

ആമുഖം

The YAESU SP-20 is an external speaker designed to enhance the audio output of your FTDX3000D and FTDX1200 transceivers. It is engineered to reproduce high-quality sound, providing clear and crisp audio for reliable communications across HF and V/UHF bands. This manual provides essential information for the proper setup, operation, and maintenance of your SP-20 external speaker.

പാക്കേജ് ഉള്ളടക്കം

സജ്ജീകരണവുമായി മുന്നോട്ടുപോകുന്നതിനുമുമ്പ്, എല്ലാ ഇനങ്ങളും പാക്കേജിൽ ഉണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

  • YAESU SP-20 External Speaker
  • Audio Connection Cable (typically attached or included)
  • M-1 Reference Microphone (Note: While listed in product specifications, the M-1 Reference Microphone is typically a separate accessory. Please verify your specific package contents.)

If any items are missing or damaged, please contact your dealer or YAESU customer support.

സജ്ജമാക്കുക

Follow these steps to properly set up your SP-20 external speaker:

  1. പ്ലേസ്മെൻ്റ്: Position the SP-20 speaker near your FTDX3000D or FTDX1200 transceiver on a stable, flat surface. Ensure there is adequate ventilation and avoid placing it in direct sunlight or near heat sources. The speaker is designed for tabletop mounting.
  2. കണക്ഷൻ: Locate the external speaker output jack on your FTDX3000D or FTDX1200 transceiver. Connect the audio cable from the SP-20 speaker to this output jack. Ensure the connection is secure.
  3. ശക്തി: The SP-20 speaker is a passive speaker and typically does not require a separate power source for basic audio output. (Note: Product specifications mention 'Corded Electric' and 'Bluetooth' connectivity, which are generally not applicable to a passive external speaker for a transceiver. For this model, assume direct audio connection without external power or wireless pairing unless otherwise specified in dedicated product documentation.)
YAESU SP-20 External Speaker, front view, showing the speaker grille and YAESU logo.
ചിത്രം 1: ഫ്രണ്ട് view of the YAESU SP-20 External Speaker. This image displays the speaker's compact design and the prominent YAESU branding, indicating its intended use as an accessory for YAESU transceivers.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the SP-20 speaker is connected, its operation is straightforward:

  • ഓഡിയോ ഔട്ട്പുട്ട്: The speaker will reproduce the audio output from your connected FTDX3000D or FTDX1200 transceiver.
  • വോളിയം നിയന്ത്രണം: Adjust the audio volume directly from your transceiver. The SP-20 does not have its own volume control.
  • മെച്ചപ്പെടുത്തിയ വ്യക്തത: The SP-20 is designed to provide clear and crisp audio, optimizing your listening experience for various communication modes on HF and V/UHF bands.

മെയിൻ്റനൻസ്

To ensure the longevity and optimal performance of your SP-20 external speaker, follow these maintenance guidelines:

  • വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the exterior of the speaker. Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the finish.
  • പൊടി സംരക്ഷണം: Keep the speaker free from dust. You may use a soft brush or a vacuum cleaner with a brush attachment to gently remove dust from the speaker grille.
  • സംഭരണം: If storing the speaker for an extended period, disconnect it from the transceiver and store it in a dry, cool place away from direct sunlight and extreme temperatures.
  • ഈർപ്പം ഒഴിവാക്കുക: The SP-20 is not waterproof. Keep it away from water and high humidity to prevent internal damage.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your SP-20 external speaker, refer to the following common troubleshooting steps:

  • ഓഡിയോ ഔട്ട്പുട്ട് ഇല്ല:
    • Ensure the audio cable is securely connected to both the speaker and the transceiver's external speaker output jack.
    • Verify that the transceiver's volume is turned up and not muted.
    • Test the transceiver's internal speaker (if available) to confirm the transceiver is producing audio.
    • Try using a different audio cable if available, to rule out a faulty cable.
  • വികലമായ ഓഡിയോ:
    • Check the audio cable for any damage or loose connections.
    • Reduce the volume level on the transceiver; excessive volume can cause distortion.
    • Ensure the speaker is not placed too close to sources of electromagnetic interference.

If these steps do not resolve the issue, please contact YAESU customer support.

സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർസ്പെസിഫിക്കേഷൻ
മോഡലിൻ്റെ പേര്SP-20
ബ്രാൻഡ്YEESU
സ്പീക്കർ തരംമോണിറ്റർ
മൗണ്ടിംഗ് തരംടേബിൾടോപ്പ് മൗണ്ട്
ഓഡിയോ put ട്ട്‌പുട്ട് മോഡ്മോണോ
ഇനത്തിൻ്റെ ഭാരം5.15 പൗണ്ട് (ഏകദേശം 2.34 കിലോഗ്രാം)
നിർമ്മാതാവിൻ്റെ ഭാഗം നമ്പർSP-20
അനുയോജ്യതFTDX3000D, FTDX1200

കുറിപ്പ്: ഉൽപ്പന്ന മെച്ചപ്പെടുത്തലിനായി സ്പെസിഫിക്കേഷനുകൾ മുൻകൂർ അറിയിപ്പ് കൂടാതെ മാറ്റത്തിന് വിധേയമാണ്.

വാറൻ്റി വിവരങ്ങൾ

The YAESU SP-20 External Speaker comes with a പരിമിത വാറൻ്റി. For specific terms and conditions, including warranty period and coverage details, please refer to the warranty card included with your product or visit the official YAESU webവാറന്റി ക്ലെയിമുകൾക്കുള്ള വാങ്ങലിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

ഉപഭോക്തൃ പിന്തുണ

For technical assistance, service, or further inquiries regarding your YAESU SP-20 External Speaker, please contact YAESU customer support. Contact information can typically be found on the official YAESU webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ ഉൽപ്പന്നത്തിനൊപ്പം നൽകിയിരിക്കുന്ന ഡോക്യുമെന്റേഷനിൽ.

നിർമ്മാതാവ്: യേശു

© 2024 YAESU. എല്ലാ അവകാശങ്ങളും നിക്ഷിപ്തം.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.