VITEK VT-1607 ST-I
VITEK VT-1607 ST-I 500 Watt Centrifugal Juicer Instruction Manual
Model: VT-1607 ST-I
ആമുഖം
Thank you for choosing the VITEK VT-1607 ST-I Centrifugal Juicer. This appliance is designed to efficiently extract juice from various fruits and vegetables, providing fresh and healthy beverages. Please read this manual carefully before operating the juicer to ensure safe and proper use, and retain it for future reference.
പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ
തീ, വൈദ്യുതാഘാതം, വ്യക്തിപരമായ പരിക്കുകൾ എന്നിവ കുറയ്ക്കുന്നതിന് വൈദ്യുത ഉപകരണങ്ങൾ ഉപയോഗിക്കുമ്പോൾ എല്ലായ്പ്പോഴും അടിസ്ഥാന സുരക്ഷാ മുൻകരുതലുകൾ പാലിക്കുക.
- ഉപയോഗിക്കുന്നതിന് മുമ്പ് എല്ലാ നിർദ്ദേശങ്ങളും വായിക്കുക.
- വോളിയം ഉറപ്പാക്കുകtagഉപകരണത്തിൽ സൂചിപ്പിച്ചിരിക്കുന്ന ഇ നിങ്ങളുടെ പ്രാദേശിക മെയിൻ വോളിയവുമായി യോജിക്കുന്നുtagബന്ധിപ്പിക്കുന്നതിന് മുമ്പ് ഇ.
- മോട്ടോർ യൂണിറ്റ്, ചരട്, പ്ലഗ് എന്നിവ വെള്ളത്തിലോ മറ്റ് ദ്രാവകങ്ങളിലോ മുക്കരുത്.
- ഉപയോഗത്തിലില്ലാത്തപ്പോൾ, ഭാഗങ്ങൾ കൂട്ടിച്ചേർക്കുന്നതിനോ വേർപെടുത്തുന്നതിനോ മുമ്പ്, വൃത്തിയാക്കുന്നതിന് മുമ്പ് ഔട്ട്ലെറ്റിൽ നിന്ന് പ്ലഗ് അൺപ്ലഗ് ചെയ്യുക.
- Avoid contact with moving parts. Ensure the appliance is properly assembled before operation.
- കേടായ കോർഡോ പ്ലഗോ ഉപയോഗിച്ച് ഒരു ഉപകരണവും പ്രവർത്തിപ്പിക്കരുത്, അല്ലെങ്കിൽ ഉപകരണത്തിൻ്റെ തകരാറുകൾ അല്ലെങ്കിൽ ഏതെങ്കിലും വിധത്തിൽ കേടുപാടുകൾ സംഭവിച്ചതിന് ശേഷം.
- വെളിയിൽ ഉപയോഗിക്കരുത്.
- Keep hands and utensils away from the feed chute during operation to prevent injury.
- Always use the food pusher provided. Never push food with your fingers or other objects.
- Ensure the safety locking arm is securely in place before operating the juicer.
- ഈ ഉപകരണം, അവരുടെ സുരക്ഷയ്ക്ക് ഉത്തരവാദിയായ ഒരു വ്യക്തി ഉപകരണത്തിൻ്റെ ഉപയോഗത്തെ സംബന്ധിച്ച മേൽനോട്ടമോ നിർദ്ദേശമോ നൽകിയിട്ടില്ലെങ്കിൽ, ശാരീരികമോ ഇന്ദ്രിയപരമോ മാനസികമോ ആയ കഴിവുകൾ കുറഞ്ഞതോ അനുഭവത്തിൻ്റെയും അറിവിൻ്റെയും അഭാവം ഉള്ള വ്യക്തികൾക്ക് (കുട്ടികൾ ഉൾപ്പെടെ) ഉപയോഗിക്കാൻ ഉദ്ദേശിച്ചുള്ളതല്ല.
ഉൽപ്പന്ന ഘടകങ്ങൾ
Familiarize yourself with the parts of your VITEK VT-1607 ST-I Centrifugal Juicer.

Figure 1: Fully assembled VITEK VT-1607 ST-I Centrifugal Juicer with juice cup and pulp container.
- മോട്ടോർ യൂണിറ്റ്: The base of the juicer containing the motor and control knob.
- Feed Chute: Opening where fruits and vegetables are inserted.
- ഫുഡ് പുഷർ: Used to guide food down the feed chute.
- മൂടി/മൂടി: Transparent cover that secures the feed chute and directs juice.
- Stainless Steel Grater cum Filter: The central component that grates and separates juice from pulp.

ചിത്രം 2: വിശദമായി view of the high-grade stainless steel grater cum filter.
- പൾപ്പ് കണ്ടെയ്നർ: Collects the separated pulp. Capacity: 1.5 liters.
- Juice Cup with Foam Separator: Collects the extracted juice. Capacity: 800 ml. Features a lid cover and partition for uniform juice pouring and foam separation.

Figure 3: Separate containers for juice and pulp, including the 800ml juice cup.
- Anti-drip System: Prevents juice from dripping after extraction.

Figure 4: The anti-drip system prevents spills and keeps your counter clean.
- Safety Locking Arm: Secures the lid and ensures the juicer operates only when correctly assembled.
സജ്ജീകരണവും അസംബ്ലിയും
Before first use, wash all detachable parts (lid, filter, pulp container, juice cup, food pusher) in warm soapy water, rinse thoroughly, and dry.
- മോട്ടോർ യൂണിറ്റ് ഒരു സ്ഥിരതയുള്ളതും പരന്നതും വരണ്ടതുമായ പ്രതലത്തിൽ വയ്ക്കുക.
- പൾപ്പ് കണ്ടെയ്നർ മോട്ടോർ യൂണിറ്റിലെ അതിന്റെ നിയുക്ത സ്ഥാനത്ത് തിരുകുക.
- Carefully place the stainless steel grater cum filter onto the motor unit's shaft, ensuring it is seated firmly.
- Position the juicer cover/lid over the filter and pulp container, aligning it correctly with the motor unit.
- Engage the safety locking arm by lifting it and securing it into the grooves on the lid. The juicer will not operate unless the locking arm is correctly engaged.
- ജ്യൂസ് കപ്പ് ജ്യൂസ് സ്പൗട്ടിന് കീഴിൽ വയ്ക്കുക.
- ഫീഡ് ച്യൂട്ടിലേക്ക് ഫുഡ് പഷർ തിരുകുക.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
ജ്യൂസ് ഫലപ്രദമായി വേർതിരിച്ചെടുക്കാൻ ഈ ഘട്ടങ്ങൾ പാലിക്കുക.
- Ensure the juicer is properly assembled and the safety locking arm is secured.
- Wash fruits and vegetables thoroughly. For larger items, cut them into pieces that fit the feed chute. Remove hard pits from fruits like peaches or plums. Peeling is generally not necessary for most fruits and vegetables, but you may peel citrus fruits.
- ജ്യൂസ് കപ്പ് ജ്യൂസ് സ്പൗട്ടിന് കീഴിൽ വയ്ക്കുക.
- അനുയോജ്യമായ ഒരു ഇലക്ട്രിക്കൽ ഔട്ട്ലെറ്റിലേക്ക് പവർ കോർഡ് പ്ലഗ് ചെയ്യുക.
- നിയന്ത്രണ നോബ് ആവശ്യമുള്ള വേഗത ക്രമീകരണത്തിലേക്ക് തിരിക്കുക:
- വേഗത 1 (കുറഞ്ഞത്): Suitable for soft fruits and vegetables (e.g., tomatoes, grapes, berries).
- വേഗത 2 (ഉയർന്നത്): Suitable for hard fruits and vegetables (e.g., carrots, apples, celery).
- Once the motor is running, gradually feed the prepared fruits and vegetables into the feed chute using the food pusher. Apply gentle, even pressure. Do not force food into the chute.
- The juice will flow into the juice cup, and the pulp will collect in the pulp container. The unique juice jar is equipped with a foam separator for clearer juice.
- When finished juicing, turn the control knob to the "OFF" position and unplug the appliance from the power outlet.
- Activate the anti-drip system by pushing the spout upwards to prevent any remaining juice from dripping.
പരിപാലനവും ശുചീകരണവും
പതിവായി വൃത്തിയാക്കുന്നത് നിങ്ങളുടെ ജ്യൂസറിന്റെ ദീർഘായുസ്സും ശുചിത്വപരമായ പ്രവർത്തനവും ഉറപ്പാക്കുന്നു.
- വൃത്തിയാക്കുന്നതിന് മുമ്പ് എല്ലായ്പ്പോഴും പവർ ഔട്ട്ലെറ്റിൽ നിന്ന് ജ്യൂസർ അഴിക്കുക.
- ജ്യൂസർ റീലെ ഉപയോഗിച്ച് വേർപെടുത്തുകasing the safety locking arm, removing the lid, filter, pulp container, and juice cup.
- Rinse all detachable parts immediately after use under running water to prevent pulp from drying and sticking.
- Wash the detachable parts (lid, filter, pulp container, juice cup, food pusher) in warm, soapy water. Use a brush to clean the fine mesh of the stainless steel filter thoroughly.
- Note: The product is NOT dishwasher safe. Please wash all parts by hand.
- പരസ്യം ഉപയോഗിച്ച് മോട്ടോർ യൂണിറ്റ് തുടയ്ക്കുകamp തുണി. മോട്ടോർ യൂണിറ്റ് ഒരിക്കലും വെള്ളത്തിലോ മറ്റേതെങ്കിലും ദ്രാവകത്തിലോ മുക്കരുത്.
- വീണ്ടും കൂട്ടിച്ചേർക്കുന്നതിനോ സംഭരിക്കുന്നതിനോ മുമ്പായി എല്ലാ ഭാഗങ്ങളും നന്നായി ഉണക്കുക.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your juicer, refer to the following common problems and solutions.
- ജ്യൂസർ ഓണാകുന്നില്ല:
- പവർ കോർഡ് സുരക്ഷിതമായി ഔട്ട്ലെറ്റിൽ പ്ലഗ് ചെയ്തിട്ടുണ്ടോയെന്ന് പരിശോധിക്കുക.
- Ensure the safety locking arm is fully engaged and locked into position. The juicer has a safety mechanism that prevents operation if not properly assembled.
- Low juice yield or excessive pulp:
- Ensure you are using the correct speed setting for the type of fruit or vegetable. Use higher speed for harder produce.
- Feed produce slowly and apply gentle, even pressure with the food pusher.
- The filter may be clogged. Clean the stainless steel filter thoroughly.
- Juicer stops during operation:
- The juicer may have overheated due to continuous use or overloading. Turn off the juicer, unplug it, and allow it to cool down for at least 30 minutes before resuming.
- Check for blockages in the feed chute or filter. Clear any obstructions.
- അമിതമായ വൈബ്രേഷൻ അല്ലെങ്കിൽ ശബ്ദം:
- Ensure all parts are correctly assembled and securely locked.
- Check if the juicer is placed on a stable, flat surface.
പ്രശ്നം നിലനിൽക്കുകയാണെങ്കിൽ, ദയവായി ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.
സ്പെസിഫിക്കേഷനുകൾ
| ബ്രാൻഡ് | VITEK |
| മോഡൽ | VT-1607 ST-I |
| പരമാവധി പവർ | 500 വാട്ട്സ് |
| പവർ സോഴ്സ് തരം | കോർഡഡ് ഇലക്ട്രിക് |
| കൺട്രോളർ തരം | ബട്ടൺ |
| മെറ്റീരിയൽ | സ്റ്റെയിൻലെസ്സ് സ്റ്റീൽ |
| ഫിനിഷ് തരം | സ്റ്റെയിൻലെസ്സ് സ്റ്റീൽ |
| Juice Cup Capacity | 800 മില്ലി ലിറ്റർ |
| പൾപ്പ് കണ്ടെയ്നർ ശേഷി | 1.5 ലിറ്റർ |
| ഇനത്തിൻ്റെ ഭാരം | 2.75 കിലോഗ്രാം |
| പ്രത്യേക സവിശേഷതകൾ | High Grade Stainless Steel grater cum filter, Unique 800ml juice jar with lid and foam separator, Stainless steel body, Anti-drip system, Detachable parts for easy cleaning, Safety lock. |
| ഡിഷ്വാഷർ സുരക്ഷിതം | ഇല്ല |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | Juicer, Accessories, User manual with Warranty Card |
വാറൻ്റിയും ഉപഭോക്തൃ പിന്തുണയും
Your VITEK VT-1607 ST-I Centrifugal Juicer comes with a manufacturer's warranty and dedicated customer support.
- വാറൻ്റി: 2-year warranty provided by the manufacturer from the date of purchase. Please retain your purchase receipt for warranty claims.
- കസ്റ്റമർ കെയർ: For any queries, service requests, or support, please contact VITEK customer care.
- ടോൾ ഫ്രീ നമ്പർ: 1800 266 0495
- WhatsApp പിന്തുണ: +91 8291 994 335
- ഇമെയിൽ: customercare@vitek.in
- പ്രവർത്തന സമയം: Monday to Saturday, 10:00 AM to 6:30 PM
- നിർമ്മാതാവ് / ഇറക്കുമതിക്കാരൻ: SPG INDIA PVT LTD., Gala No. F 105 & 106, Gundavli, Krishna Complex, Bhiwandi.

Figure 5: VITEK Customer Support details for after-sales service.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.