ലെഗ്രാൻഡ് 191511

Legrand 191511 Plexo IP55 Illuminated Push Button Switch User Manual

മോഡൽ: 191511

1. ആമുഖം

This manual provides essential information for the safe and correct installation, operation, and maintenance of the Legrand 191511 Plexo IP55 Illuminated Push Button Switch. Please read this manual thoroughly before installation and keep it for future reference.

The Legrand 191511 is a grey, surface-mounted, illuminated push button switch designed for outdoor, basement, or garage installations, offering IP55 protection against dust and water splashes.

2 സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: വൈദ്യുതാഘാതത്തിന് സാധ്യത!

  • Installation must be performed by a qualified electrician in accordance with all national and local electrical codes and regulations.
  • Always disconnect power at the main circuit breaker or fuse box before installing, servicing, or removing the switch.
  • എല്ലാ കണക്ഷനുകളും സുരക്ഷിതവും ശരിയായി ഇൻസുലേറ്റ് ചെയ്തതുമാണെന്ന് ഉറപ്പാക്കുക.
  • Do not use the switch if it appears damaged.
  • This product is rated IP55 for protection against dust and water splashes. Do not immerse in water.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Legrand 191511 Plexo push button switch features an integrated illuminated indicator and a robust design suitable for demanding environments. Its IP55 rating ensures protection against dust ingress and low-pressure water jets from any direction.

Legrand 191511 Plexo Illuminated Push Button Switch, front view

ചിത്രം 3.1: മുൻഭാഗം view of the Legrand 191511 Plexo Illuminated Push Button Switch.

പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:

  • Illuminated indicator for visibility.
  • Surface-mounted installation.
  • IP55 rated for outdoor and damp പരിസരങ്ങൾ.
  • ഗ്രേ ഫിനിഷ്.
  • Equipped with upper and lower membranes for cable entry up to 25 mm diameter.
  • Junction seals for easy adjustment on various surfaces.
Diagram showing components of the Legrand Plexo switch: Housing, Mechanism, Frame, Cover

ചിത്രം 3.2: പൊട്ടിത്തെറിച്ചു view of Plexo components.

  • ഭവനം: നൽകുന്നു ample space for wiring.
  • മെക്കാനിസം: Designed for tool-free removal.
  • ഫ്രെയിം: Tool-free disassembly.
  • കവർ: Secure fastening with 1/4 turn screws.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps for proper installation of your Legrand Plexo push button switch. Ensure power is disconnected before proceeding.

Step-by-step installation guide for Legrand Plexo switch

Figure 4.1: Simple Assembly Steps.

  1. Step 1: Disassemble the Cover. Gently pull the front cover (key) to detach it from the main housing.
  2. Step 2: Remove the Mechanism. Use a simple lever action to extract the internal switch mechanism from the housing.
  3. Step 3: Prepare Cable Entry. Break the membrane(s) on the housing for cable entry. This can typically be done without special tools. The housing is designed to accommodate tubes up to 25 mm in diameter.
  4. Step 4: Wire the Mechanism. Connect the electrical wires to the screw terminals on the switch mechanism. Refer to Figure 4.2 for terminal details. Ensure correct polarity and secure connections. After wiring, press the mechanism firmly into the housing to fix it.
  5. പിൻഭാഗം view of the Legrand Plexo switch mechanism showing wiring terminals

    Figure 4.2: Wiring terminals on the switch mechanism.

  6. Step 5: Fix the Frame. Attach the frame to the housing by simple pressure, ensuring it clicks into place securely.
  7. Step 6: Secure the Cover. Place the front cover (key) back onto the mechanism and secure it using the 1/4 turn screws. This ensures the IP55 rating is maintained.

Once installation is complete, restore power and test the switch functionality.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Legrand 191511 Plexo is a simple push button switch with manual operation.

  • To activate the connected circuit, press the button firmly.
  • To deactivate the connected circuit, press the button again (if configured as a latching switch) or release it (if configured as a momentary switch). The specific function depends on the wiring and the device it controls.
  • The integrated light will illuminate when the button is pressed or when the circuit is active, depending on the wiring configuration.

6. പരിപാലനം

The Legrand 191511 Plexo switch requires minimal maintenance.

  • വൃത്തിയാക്കൽ: സ്വിച്ചിന്റെ പുറംഭാഗം മൃദുവായ, ഡി-ക്ലാസ് ഉപയോഗിച്ച് വൃത്തിയാക്കുക.amp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or compromise the IP55 rating.
  • പരിശോധന: Periodically inspect the switch for any signs of physical damage, wear, or loose connections. Ensure the seals are intact to maintain the IP55 protection.
  • വൈദ്യുത പരിശോധനകൾ: If any issues arise, disconnect power before inspecting electrical connections. Only qualified personnel should perform electrical checks.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your Legrand Plexo switch, refer to the following common problems and solutions:

പ്രശ്നം സാധ്യമായ കാരണം പരിഹാരം
Switch does not activate the circuit.
  • വൈദ്യുതി വിതരണം ഇല്ല.
  • അയഞ്ഞ അല്ലെങ്കിൽ തെറ്റായ വയറിംഗ്.
  • തെറ്റായ സ്വിച്ച് സംവിധാനം.
  • സർക്യൂട്ട് ബ്രേക്കർ/ഫ്യൂസ് പരിശോധിക്കുക.
  • വൈദ്യുതി വിച്ഛേദിച്ച് വയറിംഗ് കണക്ഷനുകൾ പരിശോധിക്കുക.
  • Replace the switch mechanism.
Illumination light does not work.
  • Incorrect wiring for illumination.
  • Damaged light component.
  • Verify illumination wiring according to electrical diagram.
  • സ്വിച്ച് മാറ്റിസ്ഥാപിക്കുക.
Water ingress or condensation inside.
  • Improper installation of seals/membranes.
  • Damage to housing or seals.
  • Disconnect power, disassemble, and re-install ensuring all seals and membranes are correctly seated.
  • Replace damaged components or the entire switch.

If the problem persists after attempting these solutions, contact a qualified electrician or Legrand customer support.

8 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർ സ്പെസിഫിക്കേഷൻ
മോഡൽ നമ്പർ191511
ബ്രാൻഡ്ലെഗ്രാൻഡ്
അളവുകൾ (L x W x H)8.5 x 8.5 x 4 സെ.മീ
ഭാരം100 ഗ്രാം
ഓപ്പറേറ്റിംഗ് വോളിയംtage230 വോൾട്ട്
നിലവിലെ റേറ്റിംഗ്6 എ
ശക്തി150 വാട്ട്സ്
International Protection (IP) RatingIP55 (Dust protected, protected against low-pressure water jets from any direction)
സ്വിച്ച് തരംപുഷ് ബട്ടൺ
ബന്ധപ്പെടാനുള്ള തരംസാധാരണയായി തുറന്നിരിക്കുന്നു
കണക്റ്റർ തരംസ്ക്രീൻ ടെർമിനൽ
മൗണ്ടിംഗ് തരംമതിൽ മൌണ്ട്, ഉപരിതലം
ആക്യുവേറ്റർ തരംപുഷ് ബട്ടൺ
സ്ഥാനങ്ങളുടെ എണ്ണം1
നിയന്ത്രണ രീതിസ്പർശിക്കുന്ന
സർക്യൂട്ട് തരം1 വഴി
നിറംചാരനിറം
ഹൗസിംഗ് മെറ്റീരിയൽGlass (as per specifications, typically durable plastic for IP55 housing)
കോൺടാക്റ്റ് മെറ്റീരിയൽചെമ്പ്

9. വാറൻ്റിയും പിന്തുണയും

Specific warranty information for the Legrand 191511 Plexo switch is not available in this document. Please refer to the product packaging or the official Legrand webനിങ്ങളുടെ പ്രദേശത്ത് ബാധകമായ വിശദമായ വാറന്റി നിബന്ധനകൾക്കും വ്യവസ്ഥകൾക്കും സൈറ്റ് സന്ദർശിക്കുക.

For technical support, product inquiries, or assistance with installation, please contact Legrand customer service or visit their official website. Contact details can typically be found on the product packaging or on the Legrand corporate webസൈറ്റ്.

© 2023 ലെഗ്രാൻഡ്. എല്ലാ അവകാശങ്ങളും നിക്ഷിപ്തം. അറിയിപ്പ് കൂടാതെ വിവരങ്ങൾ മാറ്റത്തിന് വിധേയമാണ്.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.