Pro-Ject Essential III Recordmaster Turntable User Manual

1. ആമുഖം

Thank you for choosing the Pro-Ject Essential III Recordmaster Turntable. This high-quality record player is designed to deliver exceptional audio performance with the convenience of integrated speed control, a built-in phono stage, and a USB output for digital recording. This manual provides comprehensive instructions for the proper setup, operation, maintenance, and troubleshooting of your new turntable. Please read it carefully before use to ensure optimal performance and longevity of your device.

Figure 1: Pro-Ject Essential III Recordmaster Turntable (White)

This image shows the Pro-Ject Essential III Recordmaster turntable in its white finish, featuring the platter, tonearm, and the "ESSENTIAL" branding on the plinth. The turntable is ready for operation.

2. സജ്ജീകരണവും അസംബ്ലിയും

2.1 പായ്ക്ക് ചെയ്യലും ഉള്ളടക്കവും

Carefully remove all components from the packaging. Please retain the original packaging for future transport or service.

പാക്കേജിൽ അടങ്ങിയിരിക്കണം:

• Pro-Ject Essential III Recordmaster Turntable
• Ortofon cartridge (pre-mounted)
• ടോണെർം
• RCA ഓഡിയോ കേബിൾ
• വൈദ്യുതി വിതരണം
• ഡ്രൈവ് ബെൽറ്റ്
• തളിക
• പായ അനുഭവപ്പെട്ടു
• പൊടി മൂടി

2.2 പ്ലേസ്മെൻ്റ്

Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation around the unit.

2.3 അസംബ്ലി ഘട്ടങ്ങൾ

1. പ്ലാറ്റർ ഇൻസ്റ്റാൾ ചെയ്യുക: Carefully place the main platter onto the spindle. Ensure it sits securely and rotates freely.
2. ഡ്രൈവ് ബെൽറ്റ് ഇൻസ്റ്റാൾ ചെയ്യുക: Locate the drive belt. Gently stretch the belt around the sub-platter (if applicable) and around the motor pulley. Ensure the belt is seated correctly in the groove of the motor pulley and is not twisted.
3. ഫെൽറ്റ് മാറ്റ് ഇൻസ്റ്റാൾ ചെയ്യുക: പ്ലേറ്ററിന് മുകളിൽ തോന്നിയ പായ വയ്ക്കുക.
4. Tonearm Setup:
   • ക er ണ്ടർ‌വെയ്റ്റ്: Slide the counterweight onto the rear of the tonearm. Rotate it until the tonearm is balanced horizontally (floating freely). Lock the counterweight in place.
   • ട്രാക്കിംഗ് ഫോഴ്സ്: Refer to your cartridge's recommended tracking force (typically 1.5g - 2.0g for the Ortofon OM 10). Adjust the counterweight to the specified tracking force using the scale on the counterweight.
   • ആന്റി-സ്കേറ്റ്: Attach the anti-skate weight to the small loop on the tonearm support and guide the thread over the anti-skate wire support. The anti-skate force should generally match the tracking force.
     

     Figure 2: Tonearm with Anti-Skate Weight

     ഈ ചിത്രം ഒരു ക്ലോസ്-അപ്പ് നൽകുന്നു view of the tonearm, highlighting the anti-skate mechanism with its small hanging weight, which helps to balance the forces acting on the stylus during playback.
5. Install Dust Cover: Carefully place the dust cover onto the hinges at the rear of the turntable.
   

   Figure 3: Turntable with Dust Cover Installed

   This image displays the Pro-Ject Essential III Recordmaster turntable with its clear dust cover in place, protecting the components from dust and debris.

2.4 കണക്ഷനുകൾ

The Essential III Recordmaster features both RCA analog outputs and a USB digital output.

• ആർസിഎ ഓഡിയോ ഔട്ട്പുട്ട്: Connect the supplied RCA cable from the "L" (left) and "R" (right) outputs on the turntable to a line-level input (e.g., AUX, CD, Tuner) on your amplifier or active speakers. Since the turntable has a built-in phono stage, you do not need a dedicated "Phono" input on your ampജീവൻ.
• USB ഔട്ട്പുട്ട്: Connect a USB cable (not supplied) from the "OUT USB" port on the turntable to a free USB port on your computer (PC or Mac) for digital recording of your vinyl.
• പവർ കണക്ഷൻ: Connect the power adapter to the "DC IN" socket on the turntable and then plug it into a suitable wall outlet.

ചിത്രം 4: പിൻ പാനൽ കണക്ഷനുകൾ

This image displays the rear connection panel of the turntable, showing the USB output port, the grounding terminal, and the left (L) and right (R) RCA audio output jacks.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

3.1 പവർ ഓൺ/ഓഫ്

To power on the turntable, press the power button located on the plinth. The platter will begin to rotate. Press the button again to power off the unit.

3.2 സ്പീഡ് സെലക്ഷൻ

The Essential III Recordmaster supports 33 1/3 RPM and 45 RPM playback speeds.

• To switch between 33 1/3 RPM and 45 RPM, press the speed selection button located next to the power button. The corresponding LED indicator will illuminate.
• For 78 RPM records, a special pulley and stylus are required (not included). Consult your dealer for more information on 78 RPM playback.

3.3 ഒരു റെക്കോർഡ് പ്ലേ ചെയ്യുന്നു

1. Place a record on the platter, ensuring it is centered on the spindle.
2. ക്യൂയിംഗ് ലിവർ ഉപയോഗിച്ച് ടോൺആം ഉയർത്തുക.
3. Carefully position the tonearm over the desired starting groove of the record.
4. ക്യൂയിംഗ് ലിവർ ഉപയോഗിച്ച് ടോൺആം പതുക്കെ താഴ്ത്തുക. സ്റ്റൈലസ് റെക്കോർഡിലേക്ക് ഇറങ്ങുകയും പ്ലേബാക്ക് ആരംഭിക്കുകയും ചെയ്യും.
5. At the end of the record, lift the tonearm using the cueing lever and return it to the tonearm rest. Secure it with the tonearm clip.

3.4 USB റെക്കോർഡിംഗ്

The integrated USB output allows you to digitize your vinyl collection.

1. Connect the turntable to your computer via the USB cable.
2. Install appropriate audio recording software on your computer (e.g., Audacity, available for free online).
3. Select the turntable as the audio input device within your recording software settings.
4. Start playback on the turntable and begin recording in your software.
5. Follow your software's instructions for editing, saving, and exporting your digitized audio files.

4. പരിപാലനം

4.1 വൃത്തിയാക്കൽ

• Turntable Plinth and Dust Cover: Use a soft, lint-free cloth to wipe the surfaces. For stubborn marks, a slightly damp തുണി ഉപയോഗിക്കാം, തുടർന്ന് ഉണങ്ങിയ തുണി ഉപയോഗിക്കാം. ഉരച്ചിലുകൾ ഉള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഒഴിവാക്കുക.
• Platter and Felt Mat: The platter can be wiped with a dry cloth. The felt mat can be gently brushed to remove dust.
• സ്റ്റൈലസ്: Use a dedicated stylus cleaning brush or fluid (available from audio retailers) to gently clean the stylus. Always brush from back to front.

4.2 ബെൽറ്റ് മാറ്റിസ്ഥാപിക്കൽ

The drive belt is a wear item and may need replacement over time if you notice inconsistent speed or slippage. Contact your dealer for a replacement belt. Installation involves carefully stretching the new belt around the sub-platter and motor pulley, similar to the initial setup.

5. പ്രശ്‌നപരിഹാരം

If you encounter issues with your turntable, please consult the following table before contacting support.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Pro-Ject Audio Systems website. You can also contact your authorized Pro-Ject dealer for assistance.

For more information about Pro-Ject products, visit the Pro-Ject Store on Amazon.