1. ആമുഖം
Thank you for choosing the EMART 210cm Light Stand. This portable and stable aluminum alloy stand is designed to support various photographic equipment, including studio lights, reflectors, softboxes, flashes, and backgrounds. This manual provides essential information for the safe and effective use of your light stand.
The EMART 210cm Light Stand in a studio environment, supporting a softbox.
2 സുരക്ഷാ വിവരങ്ങൾ
- പരമാവധി ലോഡ് കപ്പാസിറ്റി: Do not exceed the maximum load capacity of 5 kg (11 lbs). Overloading can cause instability and damage to the stand or attached equipment.
- സ്ഥിരത: Always ensure the stand's legs are fully extended and locked into position before mounting any equipment. For added stability, especially with heavier loads or in windy conditions, use sandbags on the legs.
- പ്ലേസ്മെൻ്റ്: Place the stand on a flat, stable surface. Avoid uneven ground or areas where it could be easily knocked over.
- ക്രമീകരണങ്ങൾ: When adjusting the height, hold the attached equipment securely to prevent it from falling. Ensure all locking knobs are tightened after adjustment.
- ഗതാഗതം: Collapse the stand completely and use the provided carry bag for safe transport.
Illustration of the light stand's load-bearing capacity, indicating a maximum of 5 kg.
3. പാക്കേജ് ഉള്ളടക്കം
നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- 1 x EMART 210cm Adjustable Light Stand
- 1 x പോർട്ടബിൾ ക്യാരി ബാഗ്
4. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ
The EMART light stand is designed for quick and tool-free assembly.
- കാലുകൾ വിടർത്തുക: Place the stand upright on a flat surface. Gently pull the legs outwards until they are fully extended and form a stable tripod base. Ensure the leg locking knob is tightened to secure the spread.
- Extend the Center Column: Loosen the locking knobs on the center column sections. Extend the column to your desired height.
- Secure Height: Once the desired height is reached, tighten all locking knobs firmly to prevent the column from collapsing.
- മൌണ്ട് ഉപകരണങ്ങൾ: The top of the stand features a standard 1/4-inch screw thread. Attach your compatible photographic equipment (e.g., light, softbox, reflector) to this screw. Ensure the equipment is securely fastened.
Key features of the light stand: aluminum alloy structure, adjustable height, and stable three-legged design.
The adjustable height range of the light stand, from a compact 73cm to a maximum of 210cm.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Using your EMART light stand involves simple adjustments to achieve optimal positioning for your lighting equipment.
- ഉയരം ക്രമീകരിക്കൽ: To change the height, loosen the desired section's locking knob, adjust the column to the new height, and then firmly re-tighten the knob. Always ensure the equipment is balanced during adjustment.
- ഉപകരണ അനുയോജ്യത: The 1/4-inch screw thread is compatible with most standard photographic devices, including panel lights, umbrellas, ring lights, cameras, softboxes, and strobes.
- സ്ഥിരത പരിശോധന: Before leaving the stand unattended, always perform a stability check to ensure all locks are tight and the stand is balanced, especially when using heavier accessories.
The 1/4-inch screw connection allows compatibility with a wide range of photographic devices.
6. പരിപാലനം
Proper maintenance will extend the lifespan of your light stand.
- വൃത്തിയാക്കൽ: Wipe down the aluminum surfaces with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- ലൂബ്രിക്കേഷൻ: Periodically check the moving parts and apply a small amount of silicone-based lubricant if any sections become stiff. Do not over-lubricate.
- സംഭരണം: When not in use, collapse the stand and store it in its portable carry bag to protect it from dust and damage. Store in a dry environment.
- പരിശോധന: Regularly inspect all locking mechanisms, screws, and leg joints for any signs of wear or damage. Replace any damaged parts immediately.
7. പ്രശ്നപരിഹാരം
If you encounter issues with your light stand, refer to the following common solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| സ്റ്റാൻഡ് അസ്ഥിരമോ ഇളകുന്നതോ ആണ്. | Legs not fully extended or locked; locking knobs loose; uneven surface; overloaded. | Ensure legs are fully spread and all locking knobs are tightened. Place on a flat surface. Do not exceed 5 kg load capacity. Use sandbags for extra stability. |
| ഉയരം ക്രമീകരിക്കുന്നതിൽ ബുദ്ധിമുട്ട്. | Locking knobs not fully loosened; dirt/debris in column; lack of lubrication. | Ensure locking knobs are completely loosened. Clean the column sections. Apply a small amount of silicone lubricant if necessary. |
| Equipment not securely attaching to 1/4-inch screw. | Equipment not fully threaded; screw damaged. | Ensure equipment is properly aligned and threaded onto the screw. Check the screw for damage. |
8 സ്പെസിഫിക്കേഷനുകൾ
- ബ്രാൻഡ്: EMART
- മോഡൽ നമ്പർ: EM-K703-1
- മെറ്റീരിയൽ: Aluminum, Rubber, Nylon
- നിറം: കറുപ്പ്
- പരമാവധി ഉയരം: 210 സെ.മീ (7 അടി)
- മടക്കിയ വലുപ്പം: 67 സെ.മീ
- Number of Leg Sections: 3
- ഭാര പരിധി: 5 കി.ഗ്രാം (11 പൗണ്ട്)
- ഇനത്തിൻ്റെ ഭാരം: ഏകദേശം 0.92 കി.ഗ്രാം (2.03 പൗണ്ട്)
- സ്ക്രൂ ത്രെഡ്: 1/4 ഇഞ്ച്
- അനുയോജ്യമായ ഉപകരണങ്ങൾ: Camera, Flashlight, Flash, Softbox, Strobe, Reflector, Ring Light
9. വാറൻ്റിയും പിന്തുണയും
EMART provides a 12 മാസ വാറൻ്റി for manufacturing defects from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your EMART 210cm Light Stand, please contact the seller or EMART customer service through the platform where you purchased the product. Please retain your proof of purchase for warranty validation.