ALCO Heavy Duty Wheelchair Arm Pads (Model AL-66055BK-A3) - Instruction Manual

ആമുഖം

This manual provides detailed instructions for the installation, proper use, and maintenance of your ALCO Heavy Duty Desk Length Wheelchair Arm Pads. These arm pads are designed for universal replacement on most manual wheelchairs, offering enhanced comfort and support. Please read these instructions carefully before installation and use.

Image 1: ALCO Heavy Duty Desk Length Wheelchair Arm Pads (Pair) with mounting hardware.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The ALCO Heavy Duty Wheelchair Arm Pads are designed for straightforward installation. Ensure you have the correct tools, typically a screwdriver, before beginning.

1. തയ്യാറാക്കൽ: Remove the existing arm pads from your wheelchair. Keep the old screws if they are in good condition and compatible, or use the new screws provided.
2. Hole Alignment: Position the new ALCO arm pad on the armrest frame. The arm pads feature two sets of pre-drilled holes to accommodate different wheelchair models. These hole spacings are approximately 5-1/2 inches (13.97 cm) or 3-5/16 inches (8.41 cm) center-to-center. Select the set of holes that aligns with your wheelchair's armrest frame.
3. സുരക്ഷിത അറ്റാച്ച്മെൻ്റ്: Insert the screws through the aligned holes in the arm pad and into the armrest frame. Tighten the screws securely but do not overtighten, as this may damage the arm pad or the wheelchair frame.
4. Repeat for Second Pad: Follow the same steps to install the second arm pad on the opposite side of the wheelchair.
5. അന്തിമ പരിശോധന: Gently test the stability of both arm pads to ensure they are firmly attached before using the wheelchair.

ചിത്രം 2: താഴെ view of arm pad illustrating dual hole spacing options for universal fit.

ശരിയായ ഉപയോഗം

Once installed, the ALCO arm pads provide a comfortable and supportive surface for the user's arms. Ensure that the user's arms are resting fully on the pads for optimal support and pressure distribution. These arm pads are designed for manual wheelchairs and are not suitable for power chairs.

പരിപാലനവും പരിചരണവും

• വൃത്തിയാക്കൽ: To clean the arm pads, wipe them with a damp cloth using mild soap and water. Avoid harsh chemical cleaners or abrasive materials, as these can damage the surface.
• പരിശോധന: Regularly inspect the arm pads for any signs of wear, tears, or damage. Check the mounting screws periodically to ensure they remain tight.
• സംഭരണം: If the arm pads are removed for storage, keep them in a clean, dry place away from direct sunlight and extreme temperatures.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

• മോഡൽ നമ്പർ: AL-66055BK-A3
• ബ്രാൻഡ്: ALCO
• തരം: Heavy Duty Desk Length Wheelchair Arm Pads
• നിറം: കറുപ്പ്
• നീളം: 10-1/4 ഇഞ്ച് (26.04 സെ.മീ)
• Hole Spacing Options (Center-to-Center): 5-1/2 inches (13.97 cm) or 3-5/16 inches (8.41 cm)
• ഉൽപ്പന്ന അളവുകൾ: 25.73 x 5.41 x 3.81 സെ.മീ (ഏകദേശം 10.13 x 2.13 x 1.5 ഇഞ്ച്)
• ഭാരം: 260 g (approximately 0.57 lbs) per pair
• അനുയോജ്യത: Universal fit for most manual wheelchairs (e.g., Medline, Drive, Invacare, E&J, Guardian, Lumex, Tuffcare). Not for power chairs.

വാറൻ്റി വിവരങ്ങൾ

ALCO products are manufactured to high-quality standards. For specific warranty details regarding your ALCO Heavy Duty Wheelchair Arm Pads, please refer to the warranty documentation included with your purchase or contact the retailer or manufacturer directly. Keep your proof of purchase for any warranty claims.

ഉപഭോക്തൃ പിന്തുണ

If you have any questions about the installation, use, or maintenance of your ALCO Heavy Duty Wheelchair Arm Pads, or if you encounter any issues not covered in this manual, please contact your retailer or the ALCO customer support team for assistance. Provide your product model number (AL-66055BK-A3) when seeking support.

For further information, you may visit the official ALCO website or contact the seller from whom you purchased the product.