AODELAN WTR2 Wireless Timer Shutter Release Instruction Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The AODELAN WTR2 is a versatile wireless timer shutter release system designed for Canon cameras. It functions as both a remote shutter release and a programmable intervalometer, offering precise control over your camera's shutter for various photography techniques.

The system consists of a transmitter (remote control) and a receiver, communicating via a stable 2.4GHz radio frequency signal with a range of up to 60 meters (approximately 200 feet). Its LCD display provides clear information, making it suitable for use in diverse lighting conditions.

പ്രധാന സവിശേഷതകൾ:

• ഇരട്ട പ്രവർത്തനക്ഷമത: Operates as a wireless remote shutter release and a programmable timer.
• Shutter Release Modes: Supports single shot, continuous shooting, 2-second delay, and bulb (long exposure).
• വിപുലമായ ടൈമർ പ്രവർത്തനങ്ങൾ: Includes delay timer, long exposure timer, interval timer, and exposure count settings.
• Bracketed Long Exposure (BKLN): Automatically captures a series of photos with varying exposure times, ideal for HDR imaging in low-light conditions.
• ഉയർന്ന കൃത്യത: Time settings are accurate to 0.1 seconds.
• വയർലെസ് ശ്രേണി: 2.4GHz radio transmission provides a reliable connection up to 60 meters.
• LCD ഡിസ്പ്ലേ: Backlit screen for easy operation in bright sunlight or darkness.

Image 1.1: The AODELAN WTR2 system in use for professional photography, highlighting its wireless capability.

Image 1.2: The WTR2 offers both wireless control (transmitter and receiver) and wired control (transmitter directly connected to camera).

2. പാക്കേജ് ഉള്ളടക്കം

Before proceeding with setup, please ensure all items listed below are present in your package:

• WTR2 Transmitter (Remote Control)
• WTR2 Receiver
• Shutter Release Cable (specific to Canon cameras)
• ലാനിയാർഡ്
• ഇൻസ്ട്രക്ഷൻ മാനുവൽ

Image 2.1: All components included in the AODELAN WTR2 package.

3. ഉൽപ്പന്ന ഘടകങ്ങളും നിയന്ത്രണങ്ങളും

Familiarize yourself with the different parts and controls of the WTR2 system:

Image 3.1: Labeled diagram of the WTR2 transmitter and receiver, showing all buttons, ports, and indicators.

Transmitter (Remote Control)

1. പ്രവർത്തനം LED
2. എൽസിഡി ഡിസ്പ്ലേ
3. Sound/Mode Button
4. Backlight/Lock Button
5. ബട്ടൺ സജ്ജമാക്കുക
6. പ്ലേ/സ്റ്റോപ്പ് ബട്ടൺ
7. Adjustment Buttons (Up/Down/Left/Right)
8. ഷട്ടർ ബട്ടൺ
9. കേബിൾ പോർട്ട്
10. Battery Door (2*AAA)

റിസീവർ

1. പവർ ബട്ടൺ
2. Code Setting Button
3. പ്രവർത്തനം LED
4. Battery Door (2*AAA)
5. ലോക്കിംഗ് റിംഗ്
6. 1/4"-20 Mounting Lug
7. തണുത്ത ഷൂ
8. കേബിൾ പോർട്ട്

4. സജ്ജീകരണം

4.1 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

1. Open the battery door on both the transmitter and the receiver.
2. Insert two AAA batteries into each unit, ensuring correct polarity.
3. Close the battery doors securely.

4.2 Connecting the Receiver to Your Camera

1. Attach the receiver to your camera's hot shoe or cold shoe mount.
2. Connect one end of the provided shutter release cable to the receiver's cable port.
3. Connect the other end of the shutter release cable to your camera's remote control terminal. Ensure the cable type (e.g., C6 or C8) matches your camera's port.

4.3 പവർ ഓണാക്കലും ജോടിയാക്കലും

1. Press and hold the Power Button on the receiver to turn it on. The Function LED will illuminate.
2. Press and hold the ON/OFF button on the transmitter to turn it on. The LCD display will light up.
3. The transmitter and receiver should automatically pair. If pairing fails, press the Code Setting Button on the receiver and then the SET button on the transmitter to re-establish the connection.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The WTR2 offers various modes for controlling your camera's shutter. Use the Mode button to cycle through the available modes.

5.1 Basic Shutter Release Modes

• സിംഗിൾ ഷോട്ട്: Press the Shutter Button halfway to focus, then fully to take a single photo.
• തുടർച്ചയായ ഷൂട്ടിംഗ്: Press and hold the Shutter Button fully. The camera will continue to shoot as long as the button is held.
• 2-Second Delay: Press the Shutter Button fully. The camera will fire after a 2-second delay.
• Bulb (Long Exposure): In Bulb mode, press the Shutter Button once to open the shutter, and press it again to close the shutter.

5.2 Timer Modes (Intervalometer)

The WTR2 allows for precise programming of various timer functions. Use the navigation buttons (Up/Down/Left/Right) to select parameters and the SET button to confirm.

Image 5.1: The WTR2 transmitter offers precise timing, accurate to 0.1 seconds.

1. കാലതാമസം (കാലതാമസം): Sets the delay time before the first exposure. Range: 0s to 99h 59m 59s.
2. ദീർഘനേരം എക്സ്പോഷർ (ദീർഘനേരം): Sets the exposure time for each shot. This is used in conjunction with your camera's Bulb mode. Range: 0s to 99h 59m 59s.
3. ഇടവേള (INTVL): Sets the time between each exposure. Range: 1s to 99h 59m 59s.
4. Number of Exposures (N): Sets the total number of photos to be taken. Range: 1 to 399, or unlimited (--).

5.3 Time-Lapse Photography

To set up a time-lapse sequence:

1. Enter the timer mode on the transmitter.
2. സജ്ജമാക്കുക കാലതാമസം if you need a starting delay.
3. സജ്ജമാക്കുക നീണ്ട exposure time if using Bulb mode on your camera. Otherwise, set it to 0.
4. സജ്ജമാക്കുക ഐ.എൻ.ടി.വി.എൽ (interval) to the desired time between shots.
5. സജ്ജമാക്കുക N (number of exposures) to the total number of photos or to unlimited (--).
6. Press the Play/Stop button to start the sequence.

ചിത്രം 5.2: ഉദാample settings for time-lapse photography (Delay: 10s, Long: 0s, Interval: 5s, N: 399).

5.4 Bracketed Long Exposure (BKLN)

The BKLN function is useful for creating HDR images, especially in challenging lighting conditions. It automatically takes multiple exposures with varying exposure times.

1. Enable BKLN mode on the transmitter (refer to the manual for specific button presses).
2. Set the desired exposure bracketing steps.
3. Press the Shutter Button to initiate the bracketed sequence.

Image 5.3: The BKLN feature captures multiple exposures for HDR imaging, useful in low-light scenarios.

5.5 Continuous Shooting with Timer

You can also program continuous shooting with specific intervals.

ചിത്രം 5.4: ഉദാample settings for continuous shooting (Delay: 5s, Long: 0s, Interval: 2s, N: 5).

6. പരിപാലനം

• വൃത്തിയാക്കൽ: ഉപകരണം വൃത്തിയാക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക. അബ്രസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
• ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: Replace batteries when the low battery indicator appears on the LCD. Always use fresh AAA alkaline batteries.
• സംഭരണം: When not in use for extended periods, remove the batteries to prevent leakage. Store the device in a cool, dry place away from direct sunlight.
• ഈർപ്പം ഒഴിവാക്കുക: മഴ, ഈർപ്പം, അല്ലെങ്കിൽ തീവ്രമായ താപനില എന്നിവയിൽ ഉപകരണം തുറന്നുകാട്ടരുത്.

7. പ്രശ്‌നപരിഹാരം

• ഉപകരണം ഓണാക്കുന്നില്ല: ബാറ്ററി ഇൻസ്റ്റാളേഷൻ പരിശോധിച്ച് ബാറ്ററികൾ പുതിയതാണെന്ന് ഉറപ്പാക്കുക.
• ഷട്ടർ പൊട്ടുന്നില്ല: Ensure the receiver is properly connected to the camera and powered on. Check camera settings (e.g., remote control enabled). Verify transmitter and receiver are paired.
• പരിമിതമായ ശ്രേണി: Ensure there are no obstructions between the transmitter and receiver. Check battery levels.
• LCD display issues: If the display is dim or flickering, replace batteries.
• തെറ്റായ സമയം: Double-check all timer settings (DELAY, LONG, INTVL, N) on the transmitter.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

AODELAN products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included in your product packaging or visit the official AODELAN webസൈറ്റ്.

If you encounter any issues or have questions regarding the operation of your WTR2 Wireless Timer Shutter Release, please contact AODELAN customer support through their official channels. Provide your product model number (WTR-2) and a detailed description of the issue for efficient assistance.