Vont VNT-BL02

Vont Pyro USB Rechargeable Bike Light Set Instruction Manual

Model: VNT-BL02

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Vont Pyro USB Rechargeable Bike Light Set provides essential illumination for cycling safety. This set includes both a front and a rear light, each featuring multiple lighting modes and a durable, water-resistant design. The lights are easily rechargeable via USB, ensuring convenience and readiness for your rides.

ബോക്സിൽ എന്താണുള്ളത്

  • 1 ഫ്രണ്ട് ലൈറ്റ്
  • 1 റിയർ ലൈറ്റ്
  • 2 USB കേബിളുകൾ
  • 4 സ്ട്രാപ്പുകൾ

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

ലൈറ്റുകൾ ചാർജ് ചെയ്യുന്നു

Before first use, fully charge both the front and rear lights. The charging port is located underneath the flap marked "USB" on the side of each light. Pull back the rubber flap to expose the micro-USB port. Insert the provided USB cable into the port and connect the other end to a USB power source (e.g., computer, wall adapter). The charging indicator light, located beside the steel bezel, will turn green when the light is fully charged. A full charge typically takes approximately 3 hours.

ലൈറ്റുകൾ അറ്റാച്ചുചെയ്യുന്നു

The Vont Pyro Bike Lights feature a flexible silicone strap for easy, tool-free installation. Each light also has a built-in clip for alternative mounting options.

  1. Strap Installation: Attach one end of a silicone strap to the hook on the back of the light. Wrap the strap around your bicycle's handlebar (for the front light) or seat post (for the rear light). Secure the free end of the strap to the remaining hook on the light. Ensure the light is firmly attached and facing the desired direction.
  2. ക്ലിപ്പ് ഇൻസ്റ്റാളേഷൻ: For additional versatility, the lights can be clipped onto backpacks, clothing, or other gear. Simply use the integrated clip on the back of each light to secure it to a suitable edge or loop.
Vont Pyro Bike Lights being splashed with water, demonstrating IPX4 water resistance.

Image: Vont Pyro Bike Lights demonstrating their IPX4 water-resistant design, suitable for use in various weather conditions.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

പവർ ഓൺ/ഓഫ്, മോഡ് തിരഞ്ഞെടുക്കൽ

Each Vont Pyro Bike Light features a single button on its top for power control and mode cycling.

  • പവർ ഓണാക്കാൻ: Press the button once. The light will turn on in its default mode.
  • സൈക്കിൾ മോഡുകളിലേക്ക്: Press the button repeatedly to switch between the four available lighting modes.
  • പവർ ഓഫ് ചെയ്യാൻ: Continue pressing the button until the light turns off, or press and hold the button for a few seconds.

ലൈറ്റിംഗ് മോഡുകൾ

The Vont Pyro Bike Light Set offers four distinct lighting modes to suit different visibility needs:

  • പൂർണ്ണ തെളിച്ചം: പരമാവധി പ്രകാശം നൽകുന്നു.
  • Half Brightness: Offers reduced brightness for extended battery life.
  • Slow Flashing Mode: A steady, rhythmic flash for enhanced visibility.
  • Fast Flashing Mode: A rapid flash pattern for high-alert situations.
A bicycle with Vont Pyro lights installed, showing the front white light illuminating the path and the rear red light for visibility.

Image: A bicycle equipped with Vont Pyro lights, demonstrating the effectiveness of the front and rear lights in illuminating the surroundings and ensuring rider visibility.

മെയിൻ്റനൻസ്

ബാറ്ററി ലൈഫ്

The lights are equipped with built-in 650 mAh rechargeable lithium batteries. Battery life varies depending on the selected mode:

ലൈറ്റ് മോഡ്Head Light (hours)Tail Light (hours)
പൂർണ്ണ തെളിച്ചം3.52.5
Half Brightness109
Slow Flashing Mode10.59.5
Fast Flashing Mode109

ജല പ്രതിരോധം

The Vont Pyro Bike Light Set is rated IPX4 water-resistant, meaning it is protected against splashing water from any direction. This allows for safe use in rain and other wet conditions. However, it is not designed to be submerged in water.

Vont Pyro Bike Lights used in various scenarios: clipped to a dog collar, a shoe, and a backpack, highlighting their multi-use capability.

Image: The Vont Pyro Bike Lights demonstrating their versatility by being attached to a dog collar, a shoe, and a backpack, making them suitable for various outdoor activities beyond cycling.

ട്രബിൾഷൂട്ടിംഗ്

  • ലൈറ്റ് ഓണാക്കുന്നില്ല: Ensure the battery is fully charged. Connect the light to a USB power source and check if the charging indicator turns red (charging) or green (fully charged).
  • Light not holding charge: Verify that the USB cable is securely connected to both the light and the power source. If the issue persists, try a different USB cable or power adapter.
  • Light falling off during ride: Ensure the silicone strap is properly secured and tightened around the handlebar or seat post. If using the clip, confirm it is firmly attached to a stable part of your gear.

സ്പെസിഫിക്കേഷനുകൾ

  • ബ്രാൻഡ്: വോണ്ട്
  • മോഡൽ: VNT-BL02
  • നിറം: കറുപ്പ് & ചുവപ്പ്
  • മെറ്റീരിയൽ: അക്രിലോണിട്രൈൽ ബ്യൂട്ടാഡൈൻ സ്റ്റൈറൈൻ
  • ഊർജ്ജ സ്രോതസ്സ്: ബാറ്ററി പവർ
  • ജല പ്രതിരോധ നില: IPX4 (വാട്ടർ റെസിസ്റ്റൻ്റ്)
  • ഇനത്തിൻ്റെ ഭാരം: 1.45 ഔൺസ്
  • മൗണ്ടിംഗ് തരം: Handlebar Mount, Clip
  • ക്രമീകരണങ്ങളുടെ എണ്ണം: 4
  • Light Output Maximum: 80 ല്യൂമെൻസ്
  • ചാർജിംഗ് സമയം: 3 മണിക്കൂർ
  • ബാറ്ററി: ബിൽറ്റ്-ഇൻ 650 mAh റീചാർജ് ചെയ്യാവുന്ന ലിഥിയം ബാറ്ററി

വാറൻ്റിയും പിന്തുണയും

ആജീവനാന്ത വാറൻ്റി

The Vont Pyro Bike Light Set is backed by a lifetime warranty. It is covered against loss, theft, and defects in materials and workmanship for as long as you own the product.

ഉപഭോക്തൃ പിന്തുണ

For any questions, assistance, or to access the online instruction manual, please contact Vont customer support at support@vont.com.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.