APIELE 16mm Momentary Push Button Switch with 12V LED Ring Indicator User Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The APIELE 16mm Momentary Push Button Switch is designed for various electrical applications. This switch features a 12V LED ring indicator and a durable metal construction. It operates as a momentary switch, meaning it activates only while pressed and deactivates upon release. The switch is rated for 5A/250VAC and includes 1 Normally Open (NO) and 1 Normally Closed (NC) contact configuration, offering versatility for different circuit controls.

പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:

• Momentary operation: Push to activate, release to deactivate.
• Integrated 12V LED ring indicator.
• Durable metal construction with IP67 waterproof and IK10 protection.
• Contact configuration: 1 Normally Open (NO) and 1 Normally Closed (NC).
• Electrical life: 200,000 cycles; Mechanical life: 1,000,000 cycles.

Figure 1: APIELE 16mm Momentary Push Button Switch (Example: Black Shell-Blue LED)

2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

2.1 മൗണ്ടിംഗ്

The switch requires a 16mm (0.63 inch) mounting hole. The recommended panel thickness for installation is between 1mm and 10mm. Secure the switch with a nut torque of 5-14Nm.

Figure 2: Mounting dimensions and specifications for the 16mm push button switch.

2.2 വയറിംഗ് നിർദ്ദേശങ്ങൾ

The switch comes with a pigtail socket for easy wiring. The LED operates on 12V DC. The switch contacts are 1 Normally Open (NO) and 1 Normally Closed (NC).

Refer to the wiring diagram below for connection details. The pigtail wires are color-coded as follows:

• മഞ്ഞ വയർ: Normal Closed Pin (NC)
• നീല വയർ: Normal Open Pin (NO)
• ഗ്രീൻ വയർ: Common Pin (C)
• റെഡ് വയർ: Positive LED Pin (+)
• ബ്ലാക്ക് വയർ: Negative LED Pin (-)

Example Wiring for Normally Open (NO) Switch with Always-On LED:

• ബന്ധിപ്പിക്കുക പച്ച വയർ (Common) to the power source positive (+).
• ബന്ധിപ്പിക്കുക ബ്ലൂ വയർ (Normal Open) to the positive (+) input of your device.
• ബന്ധിപ്പിക്കുക റെഡ് വയർ (LED +) to a 12V switched power source.
• ബന്ധിപ്പിക്കുക കറുത്ത വയർ (LED -) to ground (-).
• ദി മഞ്ഞ വയർ (Normal Closed) is not used in this configuration.

This configuration allows the LED to be continuously lit when power is supplied to the red wire, and the switch will complete the circuit to your device when pressed.

Figure 3: Detailed wiring diagram for the APIELE 16mm push button switch, showing color codes for Normal Closed, Normal Open, Common, Positive LED, and Negative LED pins.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

This is a momentary push button switch. To operate, press and hold the button to activate the connected circuit. Release the button to deactivate the circuit. The integrated LED ring will illuminate according to its wiring configuration (e.g., always on, or only when the switch is pressed).

Figure 4: The switch is designed for high durability, with a mechanical life of 1,000,000 cycles and an electrical life of 200,000 cycles.

4. പരിപാലനം

The APIELE 16mm push button switch is designed for durability and minimal maintenance. It features an IP67 protection level, making it resistant to dust and water splashes. While it is splash-resistant, it is not designed to be submerged underwater.

• വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the switch surface. Avoid abrasive cleaners or solvents.
• പരിസ്ഥിതി വ്യവസ്ഥകൾ: The switch is suitable for operation in temperatures ranging from -20℃ to +55℃.
• സംരക്ഷണം: The IP67 rating ensures protection against dust ingress and temporary immersion in water (up to 1 meter for 30 minutes). However, prolonged submersion is not recommended.

Figure 5: The switch features IP67 protection, indicating high resistance to dust and water splashes.

5. പ്രശ്‌നപരിഹാരം

If you encounter issues with your APIELE 16mm Momentary Push Button Switch, consider the following troubleshooting steps:

• Switch Not Activating:
  • Verify all wiring connections are secure and correctly matched to the diagram (Figure 3).
  • പവർ സ്രോതസ്സ് ശരിയായ വോളിയം നൽകുന്നുണ്ടെന്ന് ഉറപ്പാക്കുക.tage (e.g., 12V for the LED).
  • Check for any loose connections at the pigtail socket or the device it controls.
• LED പ്രകാശിക്കുന്നില്ല:
  • Confirm the Red (+) and Black (-) LED wires are connected to a 12V power source and ground, respectively.
  • Check for proper polarity.
  • Ensure the 12V power source for the LED is active.
• ഇടയ്ക്കിടെയുള്ള പ്രവർത്തനം:
  • Inspect all wires for damage or fraying.
  • Ensure the switch is securely mounted and the nut torque is within the specified range (5-14Nm).
  • Avoid exceeding the switch's rated current (5A/250VAC).

ഈ ഘട്ടങ്ങൾ പാലിച്ചതിന് ശേഷവും പ്രശ്നങ്ങൾ നിലനിൽക്കുകയാണെങ്കിൽ, കൂടുതൽ സഹായത്തിനായി ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

7.1 വാറൻ്റി വിവരങ്ങൾ

Specific warranty details for this product are not provided in the available information. Please refer to the retailer's return policy or contact APIELE directly for warranty inquiries.

7.2 ഉപഭോക്തൃ പിന്തുണ

For technical assistance, product inquiries, or support, please visit the official APIELE store or contact their customer service department.

APIELE Store: https://www.amazon.com/stores/APIELE/page/194CDEEB-78B9-40FE-ABD1-C1F44F9C5282