1. ആമുഖം
Thank you for choosing the Teknetics Tek-Point Pulse Induction Pinpointer. This device is designed to accurately locate metal objects in various environments, including soil, sand, and underwater. Its pulse induction technology provides enhanced sensitivity, especially in mineralized ground. Please read this manual thoroughly before operating your pinpointer to ensure proper use and to maximize its performance and longevity.
The Tek-Point is a fully waterproof pinpointer, submersible to 6 feet, making it suitable for both fresh and saltwater use. It features an LED light for low-light conditions and comes with a belt holster for convenient carrying.
2. ഉൽപ്പന്നം കഴിഞ്ഞുview
The Tek-Point pinpointer is engineered for precision and durability. Familiarize yourself with its main components and features.
ചിത്രം 1: Teknetics Tek-Point Pulse Induction Pinpointer. This image displays the green-colored pinpointer, highlighting its compact design, the tip for detection, and the control button. A belt holster is also visible, indicating its portability.
പ്രധാന സവിശേഷതകൾ:
- Pulse Induction Technology: Provides superior depth and sensitivity, especially in challenging ground conditions.
- വാട്ടർപ്രൂഫ് ഡിസൈൻ: Fully submersible up to 6 feet (1.8 meters) for use in wet environments.
- കണ്ടെത്തൽ മോഡുകൾ: Offers audible beep, vibration, or a combination of both for target indication.
- LED ലൈറ്റ്: Integrated LED for illuminating the target area in low-light conditions.
- ഒറ്റ ബട്ടൺ പ്രവർത്തനം: Simple and intuitive control for all functions.
- 3 സംവേദനക്ഷമത നിലകൾ: Adjustable sensitivity to fine-tune detection for various target sizes and conditions.
- Lost Mode Alarm: An alarm feature to help locate the pinpointer if misplaced.
- Belt Holster: Included for convenient and secure carrying.
3. സജ്ജീകരണം
3.1 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ
The Tek-Point pinpointer requires one 9V battery (not included) for operation. Ensure the battery is fresh and correctly installed for optimal performance.
- Locate the battery cap at the rear end of the pinpointer.
- Unscrew the battery cap by turning it counter-clockwise.
- Insert a fresh 9V battery, ensuring the positive (+) and negative (-) terminals align correctly with the pinpointer's contacts.
- Carefully screw the battery cap back on clockwise until it is securely tightened. Ensure the O-ring seal is properly seated to maintain the waterproof integrity of the device.
പ്രധാനപ്പെട്ടത്: Always ensure the battery cap is fully tightened before submerging the pinpointer in water to prevent water ingress and damage.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
4.1 പവർ ഓൺ/ഓഫ്
- To turn on the pinpointer, press and hold the power button for approximately 1 second until you hear a short beep and/or feel a vibration. The LED light will also illuminate briefly.
- To turn off the pinpointer, press and hold the power button for approximately 2 seconds until you hear a longer beep and/or feel a longer vibration. The LED light will turn off.
4.2 സെൻസിറ്റിവിറ്റി അഡ്ജസ്റ്റ്മെന്റ്
The Tek-Point has 3 sensitivity levels. Adjusting the sensitivity allows you to optimize detection for different target sizes and ground conditions.
- With the pinpointer powered on, quickly press the power button repeatedly to cycle through the sensitivity levels.
- Each press will advance to the next sensitivity level, indicated by a series of short beeps/vibrations (e.g., one beep for Level 1, two for Level 2, three for Level 3).
- Level 1 is the lowest sensitivity, suitable for large targets or highly mineralized ground. Level 3 is the highest sensitivity, ideal for small targets or less mineralized ground.
4.3 Detection Modes (Beep, Vibrate, Both)
The pinpointer can be set to beep, vibrate, or both when a target is detected.
- To change the detection mode, press and hold the power button for approximately 3 seconds (after powering on, but before powering off). The pinpointer will cycle through the modes: Beep Only, Vibrate Only, Beep + Vibrate.
- Release the button when you reach your desired mode.
4.4 Lost Mode Alarm
If the pinpointer is left on and inactive for a period (typically 5 minutes), it will emit an audible alarm to help you locate it. This feature helps prevent accidental loss in the field.
4.5 LED ലൈറ്റ് ഉപയോഗിക്കുന്നു
The integrated LED light automatically activates when the pinpointer is turned on, providing illumination for the target area. It will turn off when the pinpointer is powered off.
5. പരിപാലനം
5.1 വൃത്തിയാക്കൽ
- After each use, especially in wet or sandy conditions, rinse the pinpointer with fresh water.
- സോഫ്റ്റ്, ഡി ഉപയോഗിച്ച് ഉപകരണം തുടയ്ക്കുകamp തുണി. ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
- Ensure the battery cap area and O-ring are free of dirt and debris.
- Allow the pinpointer to air dry completely before storage.
5.2 ബാറ്ററി കെയർ
- Remove the battery if the pinpointer will not be used for an extended period to prevent leakage and damage.
- ഉപയോഗിച്ച ബാറ്ററികൾ പ്രാദേശിക നിയന്ത്രണങ്ങൾ അനുസരിച്ച് ഉത്തരവാദിത്തത്തോടെ നീക്കം ചെയ്യുക.
5.3 സംഭരണം
Store the pinpointer in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided belt holster for protection during transport and storage.
6. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Pinpointer does not turn on. | ഡെഡ് അല്ലെങ്കിൽ തെറ്റായി ഇൻസ്റ്റാൾ ചെയ്ത ബാറ്ററി. | Replace with a fresh 9V battery and ensure correct polarity. Check battery cap is tightened. |
| Weak or inconsistent detection. | Low battery; incorrect sensitivity setting; highly mineralized ground. | Replace battery. Adjust sensitivity level (try lower levels in mineralized ground). |
| False signals or chatter. | High sensitivity in noisy environments; electromagnetic interference. | Reduce sensitivity. Move away from power lines or other electronic devices. |
| Water ingress after submersion. | Battery cap not properly sealed or O-ring damaged. | Ensure battery cap is fully tightened before submersion. Inspect O-ring for damage and replace if necessary. |
7 സ്പെസിഫിക്കേഷനുകൾ
- മോഡൽ: TEK-POINT
- കണ്ടെത്തൽ സാങ്കേതികവിദ്യ: പൾസ് ഇൻഡക്ഷൻ
- ജല പ്രതിരോധം: Fully submersible to 6 feet (1.8 meters)
- സെൻസിറ്റിവിറ്റി ലെവലുകൾ: 3 (അഡ്ജസ്റ്റബിൾ)
- കണ്ടെത്തൽ മോഡുകൾ: Audio Beep, Vibration, Audio + Vibration
- ഊർജ്ജ സ്രോതസ്സ്: 1x 9V Battery (not included)
- സംയോജിത സവിശേഷതകൾ: LED Light, Lost Mode Alarm
- മെറ്റീരിയൽ: മോടിയുള്ള പ്ലാസ്റ്റിക്
- അളവുകൾ: ഏകദേശം 10.3 x 3.3 x 2 ഇഞ്ച് (26.2 x 8.4 x 5.1 സെ.മീ)
- ഭാരം: Approximately 9.6 ounces (272 grams) without battery
- ഉൾപ്പെടുത്തിയ ആക്സസറികൾ: ബെൽറ്റ് ഹോൾസ്റ്റർ
8. വാറൻ്റിയും പിന്തുണയും
For warranty information and customer support, please refer to the warranty card included with your product or visit the official Teknetics webവാറന്റി ക്ലെയിമുകൾക്കുള്ള വാങ്ങലിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.
നിർമ്മാതാവ്: Teknetics
For further assistance, you may contact Teknetics customer service through their official channels. Details are typically available on the manufacturer's webസൈറ്റ് അല്ലെങ്കിൽ ഉൽപ്പന്ന പാക്കേജിംഗിൽ.