SILCA Pista Floor Pump User Manual

ആമുഖം

Thank you for choosing the SILCA Pista Floor Pump. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your new pump. Designed for quick and efficient inflation of bicycle tires, the SILCA Pista combines high-pressure capability with durable construction and premium components.

ഉൽപ്പന്നം കഴിഞ്ഞുview

Figure 1: The SILCA Pista Floor Pump in red with a black single-sided base and wood handle.

പ്രധാന സവിശേഷതകൾ:

• High Pressure Design: Delivers high pressure for quick and efficient inflation of bicycle tires.
• ഉരുക്ക് നിർമ്മാണം: Durable steel construction ensures long-lasting quality and performance.
• Wood Handle: Ergonomic Ash wood handle provides a comfortable grip.
• Premium Presta and Schrader Chuck: Equipped with machined aluminum chucks for various valve types.
• Leather Gasket: Includes a leather gasket for a secure and airtight pumping.

സജ്ജമാക്കുക

The SILCA Pista Floor Pump comes largely pre-assembled. Follow these steps to prepare your pump for first use:

1. അൺബോക്സിംഗ്: Carefully remove the pump from its packaging. Inspect for any visible damage.
2. Hose and Chuck Inspection: Ensure the hose is securely attached to the pump body and the chucks (Presta and Schrader) are properly connected to the hose.
3. അടിസ്ഥാന സ്ഥിരത: Place the pump on a flat, stable surface. The single-sided base provides stability during operation.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Follow these steps for effective and safe tire inflation:

1. ടയർ വാൽവ് തയ്യാറാക്കുക:
   • For Presta valves, unscrew the valve core lock nut counter-clockwise until it is loose. Press down briefly on the valve core to release a small amount of air and ensure it is not stuck.
   • For Schrader valves, no special preparation is typically needed.
2. Attach the Chuck:
   • Select the appropriate chuck (Presta or Schrader).
   • Firmly press the chuck onto the tire valve until it is fully seated. Ensure a tight seal to prevent air leakage.
   

   Figure 2: The SILCA Pista Floor Pump chuck attached to a bicycle tire valve.
3. ടയർ വീർപ്പിക്കുക:
   • Hold the pump handle firmly and place your feet on the pump's base for stability.
   • Push the handle down smoothly and completely to inflate the tire. Pull the handle back up to draw in more air.
   • Repeat this motion until the desired pressure is reached.
   

   Figure 3: Proper technique for using the SILCA Pista Floor Pump.

4. സമ്മർദ്ദം നിരീക്ഷിക്കുക:
   • Observe the pressure gauge located at the base of the pump. Inflate to the recommended PSI (Pounds per Square Inch) or BAR for your tire.
   • Note: The gauge scale is condensed at higher pressures. Read carefully.
   

   ചിത്രം 4: ക്ലോസപ്പ് view of the pressure gauge on the pump's base.

5. Remove the Chuck: Once the desired pressure is achieved, quickly and firmly pull the chuck straight off the valve.
6. Secure Presta Valve (if applicable): For Presta valves, screw the valve core lock nut clockwise until it is finger-tight.

മെയിൻ്റനൻസ്

Regular maintenance ensures the longevity and optimal performance of your SILCA Pista Floor Pump.

• Leather Gasket Care: The leather gasket is crucial for an airtight seal. Over time, it may dry out or wear.
  • If pumping becomes difficult or air leaks are detected, the leather gasket may need lubrication or replacement.
  • Apply a small amount of leather conditioner or a suitable lubricant to the gasket to keep it supple.
  • Replacement leather gaskets are available from SILCA or authorized dealers.
• പൊതുവായ ശുചീകരണം: Wipe down the pump body and hose with a damp അഴുക്കും പൊടിയും നീക്കം ചെയ്യാനുള്ള തുണി. കഠിനമായ രാസവസ്തുക്കൾ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
• സംഭരണം: Store the pump in a dry, clean environment away from extreme temperatures.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

• മോഡലിൻ്റെ പേര്: PISTA
• ഭാഗം നമ്പർ: AM-PU-001-ASY-0101
• നിറം: ചുവപ്പ്
• മെറ്റീരിയലുകൾ: Alloy Steel, Aluminum, Brass, Leather, Wood
• ഊർജ്ജ സ്രോതസ്സ്: മാനുവൽ
• പരമാവധി മർദ്ദം: 15 Bars (approximately 220 PSI)
• ഇനത്തിൻ്റെ അളവുകൾ (LxWxH): 25.98 x 9.06 x 3.94 ഇഞ്ച്
• ഇന പാക്കേജ് അളവുകൾ (LxWxH): 27 x 9.5 x 3 ഇഞ്ച്
• പാക്കേജ് ഭാരം: 0.66 കിലോഗ്രാം
• UPC: 853740005886

വാറൻ്റിയും പിന്തുണയും

SILCA products are built for durability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official SILCA website. For technical support, replacement parts, or service inquiries, please contact SILCA customer service directly.

SILCA Official Webസൈറ്റ്: www.സിൽക്ക.സിസി

ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ: ദയവായി റഫർ ചെയ്യുക webഏറ്റവും പുതിയ കോൺടാക്റ്റ് വിശദാംശങ്ങൾക്കായി സൈറ്റ്.