INTEX Ultra XTR Deluxe Rectangular Above Ground Swimming Pool Set

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Intex Ultra XTR Deluxe Rectangular Above Ground Swimming Pool Set (Model 26363EH) offers a premium swimming experience with its robust construction and efficient filtration system. Designed for durability and ease of use, this pool is an excellent addition to any backyard.

• അളവുകൾ: 24ft x 12ft x 52in (288"L x 144"W x 52"H)
• ജലത്തിൻ്റെ ആഴം: 45 ഇഞ്ച്
• ജലശേഷി: 8,403 ഗാലൻ
• ഫ്രെയിം: High-quality galvanized steel frame with precision-engineered locking system for enhanced durability and stability. Inner and outer powder coating provides superior rust resistance.
• ലൈനർ: Puncture-resistant 3-Ply PVC construction, offering 50% higher tear resistance compared to standard liners.
• ഫിൽട്ടറേഷൻ: Includes a Krystal Clear Sand Filter System (SX2100) with 6 functions (Filtration, Backwash, Rinse, Recirculate, Drain, Close System) to keep water sparkling clean.

Figure 1: Complete Intex Ultra XTR Deluxe Rectangular Pool Set.

സജ്ജീകരണ ഗൈഡ്

Proper site preparation and assembly are crucial for the longevity and safety of your Intex pool. While the Easy Lock System allows for quick assembly, careful attention to detail during setup will ensure optimal performance.

1. സൈറ്റ് തയ്യാറാക്കൽ

Select a perfectly level area for your pool. The actual pad dimensions required are approximately 20 feet by 11 feet. It is essential to dig out any high areas rather than building up low areas, as filled soil can settle and cause the pool to become unlevel. Remove all rocks, pebbles, roots, and any other non-dirt material from the chosen area to prevent liner punctures.

• Spray the ground with a weed and grass killer to prevent vegetation growth under the pool.
• Consider adding anti-fatigue mats under the pool base for added comfort and protection against punctures.

2. ഫ്രെയിം അസംബ്ലി

The pool frame utilizes an Easy Lock System, allowing components to snap together without the need for pins or tools. While the manufacturer states a 90-minute assembly time, having at least two people will significantly ease the process.

Figure 2: Easy-Lock System for tool-free frame assembly.

3. Leg Support

To prevent the pool legs from sinking and causing the pool to become unlevel, place sturdy support blocks under each leg. Pressure-treated wood blocks (e.g., 2"x12"x10") are recommended. Avoid lightweight concrete pavers, as they may crack under the pool's substantial weight (over 4 tons when full). Recess these blocks into the ground to be level with the pool base.

4. Liner and Cover Placement

Lay out the protective ground cloth (included) followed by the pool liner. Ensure the liner is smooth and free of wrinkles before filling. Once the pool is filled, use the included pool cover to keep the water clean when not in use.

Figure 3: All included accessories for your pool set.

5. Pump and Filter Setup

Position the Krystal Clear Sand Filter System on a stable, level platform (e.g., a 36"x18" sled/platform). Connect all hoses securely. The pump's power plugs are large; ensure you have a suitable GFCI-protected outlet within 20 feet and use a weatherproof box for any extension cord connections.

Figure 4: The Krystal Clear Sand Filter Pump SX2100.

Operating Your Pool

Once assembled and filled, operating your Intex pool involves managing the filtration system and maintaining water quality for a safe and enjoyable swimming environment.

1. ഫിൽട്ടറേഷൻ സിസ്റ്റം

The included Krystal Clear Sand Filter System (SX2100) is designed to keep your pool water clean and clear. It offers six functions: Filtration, Backwash, Rinse, Recirculate, Drain, and Close System. Regular operation of the filter is essential for water clarity.

• Sand in the filter can last up to 5 years with regular backwashing, reducing the need for frequent media replacement.
• The pump has a flow rate of 2100 GPH, ensuring efficient water circulation.

Figure 5: Pool dimensions and water capacity for optimal operation.

2. ജല രസതന്ത്രം

Maintaining proper water chemistry is vital. Consider using an Intex saltwater generator for easier maintenance and reduced chemical use. If using a saltwater system, you will need approximately 115 lbs of pool salt for this pool size. Additionally, add Cyanuric Acid (CYA) to protect chlorine from UV breakdown; approximately 1.1 lbs of CYA is needed initially.

3. Accessories for Convenience

Enhance your pool experience with additional accessories:

• A pool skimmer or net for surface debris removal.
• A pool vacuum for cleaning the bottom.
• A good test kit to regularly monitor water chemistry.
• A small kiddie pool as a foot bath at the ladder base to minimize dirt tracking into the pool.
• For colder climates or preferences, a solar heater can raise water temperature.

മെയിൻ്റനൻസ്

Regular maintenance ensures the longevity of your pool and the cleanliness of its water.

1. ഫിൽട്ടർ മെയിൻ്റനൻസ്

Perform regular backwashing of your sand filter to remove trapped debris and maintain optimal filtration efficiency. This process helps extend the life of the sand media.

2. ജലശുദ്ധീകരണം

Continuously monitor and adjust water chemistry. If shocking the pool, wait at least 24 hours before adding algaecide, as chlorine shock can neutralize its effects.

3. വൃത്തിയാക്കൽ

Regularly skim the surface for leaves and debris. Use a pool vacuum to clean the pool floor. The rectangular shape of this pool facilitates easy cleaning, similar to an in-ground pool.

4. Liner Care

The 3-Ply PVC liner is robust, but in case of minor damage, a patch is included for easy repairs.

Figure 6: The durable 3-Ply Side Wall Liner is designed for longevity.

ട്രബിൾഷൂട്ടിംഗ്

This section addresses common issues you might encounter with your Intex pool.

1. Pool Becoming Unlevel

If the pool becomes unlevel after filling, it is likely due to improper ground preparation or insufficient leg support. Ensure the ground is perfectly flat before assembly and that sturdy, recessed blocks are placed under each leg to distribute the weight evenly. An unlevel pool puts undue stress on the frame.

2. Water Clarity Issues

If your water is not sparkling clear, check the sand filter for proper operation and perform a backwash if needed. Verify chemical levels using a test kit and adjust as necessary. Ensure adequate filtration time daily.

3. Punctures or Leaks

The liner is robust, but punctures can occur, often from sharp objects underneath or within the pool. Thoroughly inspect the ground before setup. For minor leaks, use the included patch kit. For larger issues, consult the full user manual or Intex support.

4. Cold Water

If the water temperature is too low for comfort, especially in cooler climates or during evenings, consider investing in a solar heater. The included pool cover helps retain heat but may not be sufficient for significant temperature increases.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി വിവരങ്ങൾ

The Intex Ultra XTR Deluxe Rectangular Above Ground Swimming Pool Set includes a 2 വർഷത്തെ വാറൻ്റി. Please refer to the full user manual for detailed terms and conditions regarding warranty coverage and claims.

പിന്തുണയും ഉറവിടങ്ങളും

For further assistance, detailed instructions, or troubleshooting not covered in this manual, please utilize the following resources:

• ഔദ്യോഗിക ഉപയോക്തൃ മാനുവൽ (PDF): PDF മാനുവൽ ഡൗൺലോഡ് ചെയ്യുക
• Intex Customer Support: For specific product inquiries, parts, or warranty claims, please contact Intex customer support directly. Contact information can typically be found on the product packaging or the official Intex webസൈറ്റ്.