Highdas 29030-10
Highdas Replacement Ni-MH Battery for Summer Infant Baby Monitors
മോഡൽ: 29030-10
Brand: Highdas
1. ആമുഖം
This manual provides comprehensive instructions for the safe and effective use of your Highdas replacement Ni-MH battery, model 29030-10. This battery is designed to restore power to compatible Summer Infant baby monitor parent units. Please read this manual thoroughly before installation and use.
2 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ
- Do not disassemble, crush, puncture, or short-circuit the battery.
- ഉയർന്ന താപനിലയിലോ തീയിലോ ബാറ്ററി തുറന്നുകാട്ടരുത്.
- ബാറ്ററി വെള്ളത്തിൽ നിന്നും ഈർപ്പത്തിൽ നിന്നും അകറ്റി നിർത്തുക.
- ഉപയോഗിച്ച ബാറ്ററികൾ പ്രാദേശിക നിയന്ത്രണങ്ങൾ അനുസരിച്ച് സംസ്കരിക്കുക. ഗാർഹിക മാലിന്യങ്ങൾക്കൊപ്പം സംസ്കരിക്കരുത്.
- കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
- Use only with specified Summer Infant baby monitor models.
- If the battery shows signs of damage, swelling, or leakage, discontinue use immediately.
3. Compatible Summer Infant Monitor Models
This Highdas replacement battery is compatible with the following Summer Infant baby monitor parent units:
- Summer Infant Wide View 28650
- Summer Infant Wide View 29000
- Summer Infant Wide View 29000എ
- Summer Infant Clear Sight 29040
- Summer Infant Clear Sight 29030
- Summer Infant Sure Sight 2.0 29600
- Summer Infant Glimpse 29890
- Summer Infant Glimpse 36004

Image: Highdas replacement battery and compatible Summer Infant monitor models.
4. പാക്കേജ് ഉള്ളടക്കം
നിങ്ങളുടെ പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനം അടങ്ങിയിരിക്കണം:
- 1 x Highdas Ni-MH Replacement Battery (Model 29030-10)
5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps to replace the battery in your Summer Infant baby monitor parent unit:
- പവർ ഓഫ്: Ensure your Summer Infant baby monitor parent unit is turned off and disconnected from its power adapter.
- ബാറ്ററി കമ്പാർട്ട്മെന്റ് കണ്ടെത്തുക: On the back of the parent unit, locate the battery compartment cover. This is typically secured with a small screw or a latch.
- കവർ നീക്കം ചെയ്യുക: Use a small screwdriver (if necessary) or slide the latch to open and remove the battery compartment cover.
- പഴയ ബാറ്ററി വിച്ഛേദിക്കുക: Carefully disconnect the old battery from its connector. Gently pull on the connector, not the wires.
- പഴയ ബാറ്ററി നീക്കം ചെയ്യുക: കമ്പാർട്ട്മെൻ്റിൽ നിന്ന് പഴയ ബാറ്ററി നീക്കം ചെയ്യുക.
- പുതിയ ബാറ്ററി ഇടുക: Place the new Highdas replacement battery into the compartment, ensuring it fits snugly.
- പുതിയ ബാറ്ററി ബന്ധിപ്പിക്കുക: Connect the new battery's connector to the port inside the battery compartment. Ensure the connector is oriented correctly and clicks into place.
- കവർ മാറ്റിസ്ഥാപിക്കുക: Reattach the battery compartment cover and secure it.
- പ്രാരംഭ ചാർജ്: Connect the parent unit to its power adapter and allow it to charge fully before first use. This may take several hours.

ചിത്രം: വിശദമായത് view of the battery connector type.

Image: Highdas replacement battery with connector.
6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once the new battery is installed and fully charged, your Summer Infant baby monitor parent unit will operate as intended. Refer to your original Summer Infant monitor manual for specific operating instructions for your device.
- ആദ്യ ഉപയോഗം: മികച്ച പ്രകടനത്തിന്, ആദ്യമായി ഉപയോഗിക്കുന്നതിന് മുമ്പ് ബാറ്ററി പൂർണ്ണമായും ചാർജ് ചെയ്യുക.
- ചാർജിംഗ്: Connect the monitor parent unit to its original power adapter to charge the battery. The charging indicator on your monitor will typically show its status.
- ബാറ്ററി ലൈഫ്: Battery life will vary depending on usage patterns, screen brightness, and features enabled on your monitor.
7. പരിപാലനം
- സംഭരണം: If storing the battery for an extended period, ensure it is partially charged (around 50%) and stored in a cool, dry place. Avoid storing fully charged or fully depleted.
- വൃത്തിയാക്കൽ: Keep the battery and its contacts clean and dry. Do not use liquid cleaners directly on the battery.
- സൈക്കിൾ ജീവിതം: Ni-MH batteries have a finite number of charge cycles. Over time, the battery's capacity will naturally decrease.
8. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ പരിഹാരം |
|---|---|
| ബാറ്ററി ചാർജ് ചെയ്യുന്നില്ല. |
|
| Short battery life after full charge. |
|
| Monitor does not power on with new battery. |
|
9. ഉൽപ്പന്ന സവിശേഷതകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബാറ്ററി തരം | Ni-MH (നിക്കൽ-മെറ്റൽ ഹൈഡ്രൈഡ്) |
| ശേഷി | 800mAh |
| വാല്യംtage | 3.6V |
| മോഡൽ നമ്പർ | 29030-10 |
| അളവുകൾ | ഏകദേശം 2.24 x 1.77 x 0.63 ഇഞ്ച് (5.7 x 4.5 x 1.6 സെ.മീ) |
| ഭാരം | ഏകദേശം 2.89 ഔൺസ് (82 ഗ്രാം) |
| സുരക്ഷാ സവിശേഷത | Integrated overcharge module |

Image: Highdas replacement battery with specifications.
10. വാറൻ്റിയും പിന്തുണയും
For warranty information or technical support, please contact the manufacturer, Highdas, through your original purchase platform or their official webസൈറ്റ്. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.