Roland AX-EDGE-W

Roland AX-Edge 49-Key Keytar User Manual

Model: AX-EDGE-W

ആമുഖം

The Roland AX-Edge is a performance synthesizer designed for keytarists, featuring a modern design with customizable Edge Blades, 49 full-sized keys, and a specialized sound set. It offers a wide range of tones and effects to enhance musical expression.

A musician playing the Roland AX-Edge Keytar on stagഎസിനൊപ്പം ഇtagഇ ലൈറ്റിംഗ്.

Figure 1: Roland AX-Edge Keytar in use during a performance.

സജ്ജമാക്കുക

1. Powering the AX-Edge

The AX-Edge can be powered in two ways:

  • എസി അഡാപ്റ്റർ: Connect the included AC adaptor to the DC IN port on the rear panel and plug it into a standard power outlet.
  • ബാറ്ററികൾ: For portable use, the AX-Edge supports up to 4 hours of operation using rechargeable Ni-MH batteries (not included). Insert eight AA-size rechargeable Ni-MH batteries into the battery compartment.

2. ബാഹ്യ ഉപകരണങ്ങളിലേക്ക് ബന്ധിപ്പിക്കുന്നു

The AX-Edge is designed to be connected to a computer or other MIDI devices to produce sound, as it does not have a built-in speaker or microphone for direct sound output.

  • മിഡി യുഎസ്ബി: Use a USB cable to connect the AX-Edge to your computer. This allows for MIDI data transmission and power.
  • വയർലെസ് കണക്ഷൻ: The keytar can also connect wirelessly to your computer using compatible software. Refer to your software's documentation for setup instructions.
  • ഓഡിയോ ഔട്ട്പുട്ട്: Connect the AUDIO OUT jacks to an amplifier, mixer, or headphones for sound monitoring.
  • മൈക്രോഫോൺ ഇൻപുട്ട്: A MIC INPUT is available for using the built-in vocoder function.

3. സ്ട്രാപ്പ് അറ്റാച്ചുചെയ്യുന്നു

For comfortable playing, attach a guitar strap to the strap pins located on the body of the keytar. An extra Edge Blade is included for customization.

White Roland AX-Edge Keytar with a strap attached, viewമുകളിൽ നിന്ന് ed.

Figure 2: Roland AX-Edge Keytar with strap attached, ready for use.

4. Customizing Edge Blades

The AX-Edge features interchangeable Edge Blades, allowing for personalized aesthetics. An extra Edge Blade is included with your purchase. To change the Edge Blade, carefully unscrew the fasteners holding the current blade in place, remove it, and attach the new blade using the same fasteners.

Video 1: Official Roland AX-Edge 49-Key Keytar overview, demonstrating features including customizable Edge Blades.

Operating the AX-Edge

1. കീബോർഡ് സവിശേഷതകൾ

The AX-Edge is equipped with 49 full-sized keys that support velocity and channel aftertouch, providing expressive control over your sound.

ക്ലോസ് അപ്പ് view of the keys on the Roland AX-Edge Keytar.

ചിത്രം 3: വിശദമായി view of the 49 full-sized keys.

2. Sound Selection and Customization

Access a vast library of sounds and effects:

  • Programs and Tones: Choose from 320 programs and over 500 preset tones specifically designed for keytarists.
  • മൾട്ടി-ഇഫക്റ്റുകൾ: Utilize 79 types of part multi-effects and part EQ, along with 79 types of program multi-effects, chorus, reverb, master compressor, and master EQ to shape your sound.
  • ലെയറിംഗ്: Build complex sounds by layering up to four different parts simultaneously.

3. Performance Controls

Enhance your performance with intuitive controls:

  • Pitch Bend and Modulation Bar: Located on the neck, these controls allow for dynamic pitch and tone manipulation.
  • Octave Shift Buttons: Easily shift the keyboard's octave range up or down.
  • Ribbon Controller: Provides a unique way to control various parameters.
  • അസൈൻ ചെയ്യാവുന്ന നിയന്ത്രണങ്ങൾ: Customize buttons and sliders to control specific functions or effects.
Close-up of the control panel on the Roland AX-Edge Keytar, showing buttons and a digital display.

Figure 4: Control panel with program selection and performance modifiers.

4. Vocoder Function

The built-in vocoder allows you to process your voice through the synthesizer's sounds. Connect a microphone to the MIC INPUT jack and activate the vocoder function to create unique vocal effects.

5. അധിക പ്രവർത്തനങ്ങൾ

The AX-Edge includes features such as a Song Player for playback, Arpeggio for automatic note patterns, and a Lock function to prevent accidental changes during performance.

മെയിൻ്റനൻസ്

1. വൃത്തിയാക്കൽ

Wipe the surface of the AX-Edge with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish. For stubborn dirt, a slightly damp തുണി ഉപയോഗിക്കാം, തുടർന്ന് ഉണങ്ങിയ തുണി ഉപയോഗിക്കാം.

2. സംഭരണം

Store the keytar in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. When not in use, it is recommended to store it in a protective case to prevent dust accumulation and physical damage.

ട്രബിൾഷൂട്ടിംഗ്

1. ശബ്ദ ഔട്ട്പുട്ട് ഇല്ല

  • Ensure the AX-Edge is properly connected to an amplifier, mixer, or headphones via the AUDIO OUT jacks.
  • Verify that the volume levels on both the AX-Edge and the connected audio device are turned up.
  • Confirm that the correct sound program is selected on the AX-Edge and that your connected software (if applicable) is receiving MIDI signals.

2. Connectivity Issues (USB/Wireless)

  • For USB connections, try a different USB port or cable. Ensure necessary drivers are installed on your computer.
  • For wireless connections, check the Bluetooth or wireless settings on both the AX-Edge and your computer. Ensure they are paired correctly and within range.

3 ബാറ്ററി ലൈഫ്

  • If using batteries, ensure they are rechargeable Ni-MH batteries and are fully charged.
  • Battery life can vary based on usage and battery condition. Consider using the AC adaptor for extended sessions.

സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
ബ്രാൻഡ്റോളണ്ട്
മോഡൽ നമ്പർAX-EDGE-W
നിറംവെള്ള
കീകളുടെ എണ്ണം49
പ്രധാന സവിശേഷതകൾVelocity and Channel Aftertouch
Tones/Programs320 Programs, Over 500 Preset Tones
ഇഫക്റ്റുകൾ79 Part Multi-Effects, 79 Program Multi-Effects, Chorus, Reverb, Master Compressor, Master EQ
പവർ ഉറവിടംBattery Powered (Rechargeable Ni-MH), AC Adaptor
ബാറ്ററി ലൈഫ്Up to 4 hours (with rechargeable Ni-MH batteries)
കണക്റ്റിവിറ്റിMIDI USB, USB
ഇനത്തിൻ്റെ ഭാരം8.04 കിലോഗ്രാം
ഇനത്തിൻ്റെ അളവുകൾ55.31 x 17.2 x 8.07 ഇഞ്ച്
ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾExtra Edge Blade

വാറൻ്റിയും പിന്തുണയും

For detailed warranty information and customer support, please refer to the official Roland webസൈറ്റ്. നിർമ്മാതാവിന്റെ website provides comprehensive resources, including warranty terms, service centers, and additional product documentation.

സന്ദർശിക്കുക: www.roland.com

© 2026 റോളണ്ട് കോർപ്പറേഷൻ. എല്ലാ അവകാശങ്ങളും നിക്ഷിപ്തം.

അനുബന്ധ രേഖകൾ - AX-EDGE-W

പ്രീview Roland AX-Edge Owner's Manual
Comprehensive owner's manual for the Roland AX-Edge digital keyboard, covering setup, operation, performance functions, editing, connectivity, and specifications. Learn to use its controllers, sound generator, effects, and external connections.
പ്രീview Roland AX-1 Service Notes and Parts List
Comprehensive service notes, technical specifications, parts lists, and disassembly guide for the Roland AX-1 MIDI keyboard controller.
പ്രീview Roland AX-1 MIDI Keyboard Controller User Manual
Comprehensive user manual for the Roland AX-1 MIDI keyboard controller, covering features, specifications, operation, connections, and troubleshooting. Learn to use your AX-1 for live performance and studio setups.
പ്രീview Roland AX-7 MIDI Keyboard Controller Service Notes
Comprehensive service notes for the Roland AX-7 MIDI Keyboard Controller, providing detailed specifications, parts lists, disassembly instructions, control layout, block diagrams, circuit schematics, and test procedures.
പ്രീview Roland JV-30 16 Part Multi Timbral Synthesizer Owner's Manual
Explore the features and operation of the Roland JV-30, a 16-part multi-timbral synthesizer, with this comprehensive owner's manual. Learn about its sounds, MIDI capabilities, and performance functions.
പ്രീview Roland JP-6 Synthesizer Service Notes and Technical Manual
Comprehensive service notes and technical manual for the Roland JP-6 synthesizer, including specifications, circuit descriptions, maintenance procedures, parts lists, and MIDI implementation details. This document provides detailed schematics, PCB layouts, and component information for servicing and understanding the JP-6.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.