1. ആമുഖം
Thank you for choosing the Auna Car-HiFi Car Subwoofer Dual Base Box. This passive subwoofer system is designed to enhance your vehicle's audio experience with powerful bass reproduction. It features two 10-inch deep tone speakers, 2-inch swivel coils, and an integrated blue LED light effect, all housed in a durable felt-covered enclosure.
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your subwoofer. Please read it thoroughly before use and retain it for future reference.

ചിത്രം 1.1: മുൻഭാഗം view of the Auna Car-HiFi Car Subwoofer Dual Base Box, showcasing the dual speakers and blue LED illumination through the acrylic window.
2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ
Please observe the following safety instructions to prevent damage to the device, your vehicle, or personal injury:
- Ensure all connections are secure and correctly polarized to prevent short circuits or electrical damage.
- Disconnect the vehicle's battery before performing any wiring or installation work.
- Install the subwoofer in a stable location where it will not obstruct driving visibility or interfere with vehicle controls.
- Avoid exposing the unit to excessive moisture, dust, or extreme temperatures.
- Do not attempt to open or modify the subwoofer enclosure. Refer all servicing to qualified personnel.
- സബ് വൂഫറിന് ചുറ്റും ആവശ്യത്തിന് വായുസഞ്ചാരം ഉറപ്പാക്കുക, അങ്ങനെ അമിതമായി ചൂടാകുന്നത് തടയാം.
- Use appropriate gauge wiring for power and audio connections as specified by car audio standards.
3. പാക്കേജ് ഉള്ളടക്കം
പെട്ടി ശ്രദ്ധാപൂർവ്വം അൺപാക്ക് ചെയ്യുക, എല്ലാ ഇനങ്ങളും അവിടെയുണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക. ഏതെങ്കിലും ഇനങ്ങൾ നഷ്ടപ്പെട്ടിട്ടുണ്ടെങ്കിലോ കേടുപാടുകൾ സംഭവിച്ചിട്ടുണ്ടെങ്കിലോ, ഉടൻ തന്നെ നിങ്ങളുടെ റീട്ടെയിലറെ ബന്ധപ്പെടുക.
- 1 x Auna Car-HiFi Car Subwoofer Dual Base Box
- 1 x 12V cable for LED light effect
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
മികച്ച പ്രകടനത്തിനും സുരക്ഷയ്ക്കും ശരിയായ ഇൻസ്റ്റാളേഷൻ നിർണായകമാണ്. ഏതെങ്കിലും ഘട്ടങ്ങളെക്കുറിച്ച് നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ, ഒരു പ്രൊഫഷണൽ കാർ ഓഡിയോ ഇൻസ്റ്റാളറെ സമീപിക്കുക.
4.1 പ്ലേസ്മെൻ്റ്
Choose a secure location in your vehicle, typically the trunk or cargo area, where the subwoofer can be firmly anchored. Ensure the chosen location does not obstruct airbags, seat belts, or other safety features. The durable felt coating and robust construction are designed for car environments.

Image 4.1: The Auna Car-HiFi Car Subwoofer Dual Base Box with its dimensions indicated: 60cm length, 32cm depth, and 21cm height.
4.2 വയറിംഗ് കണക്ഷനുകൾ
The subwoofer is a passive unit and requires an external amplifier (not included) to function. Connect the subwoofer to your car audio system as follows:
- ഓഡിയോ ഇൻപുട്ട്: Locate the speaker terminals on the rear of the subwoofer box. These are typically marked with '+' (red) and '-' (black) for each channel. Connect the speaker output wires from your amplifier to these terminals, ensuring correct polarity. The subwoofer has an impedance of 4 Ohms.
- LED Light Effect Power: The blue LED light effect requires a 12V power supply. Connect the included 12V cable to the "neon light input" terminal on the rear panel. Connect the other end of this cable to a switched 12V power source in your vehicle (e.g., accessory power), ensuring it is fused appropriately.

Image 4.2: Close-up of the rear connection panel, showing the speaker wire terminals (red and black) and the "neon light input" for the 12V LED power cable.
പ്രധാനപ്പെട്ടത്: Always ensure the vehicle's battery is disconnected before making any electrical connections. Double-check all wiring for correct polarity and secure connections to prevent damage to the subwoofer or ampജീവൻ.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once the subwoofer is correctly installed and wired, you can begin enjoying enhanced bass in your car audio system.
- പവർ ഓൺ: Turn on your car's ignition and car radio. The subwoofer's LED lights should illuminate if connected to a switched 12V source.
- ഓഡിയോ പ്ലേബാക്ക്: Play audio through your car radio. The subwoofer will reproduce low-frequency sounds (bass) from your audio source.
- ബാസ് ക്രമീകരിക്കുന്നു: Adjust the bass level and crossover frequency settings on your external amplifier or car radio to achieve your desired sound balance. Start with low volume and gradually increase it.
- LED പ്രഭാവം: The blue LED light effect will operate whenever the 12V power source is active.

ചിത്രം 5.1: വിശദമായ view of one of the subwoofer cones, highlighting the blue LED lighting around its perimeter, which activates when powered.
6. പരിപാലനം
To ensure the longevity and optimal performance of your subwoofer, follow these simple maintenance guidelines:
- വൃത്തിയാക്കൽ: Use a soft, dry cloth to wipe down the felt enclosure and acrylic window. Avoid abrasive cleaners or solvents.
- പരിശോധന: സുരക്ഷിതമായി നിലകൊള്ളുന്നുവെന്ന് ഉറപ്പാക്കാൻ എല്ലാ വയറിംഗ് കണക്ഷനുകളും ഇടയ്ക്കിടെ പരിശോധിക്കുക.
- സംരക്ഷണം: The transparent acrylic glass plate protects the speakers. Avoid placing heavy objects on the subwoofer box.
7. പ്രശ്നപരിഹാരം
If you encounter issues with your subwoofer, refer to the following troubleshooting guide:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| സബ് വൂഫറിൽ നിന്ന് ശബ്ദമില്ല |
|
|
| Distorted or weak bass |
|
|
| LED വിളക്കുകൾ പ്രവർത്തിക്കുന്നില്ല |
|
|
ഈ പരിഹാരങ്ങൾ പരീക്ഷിച്ചതിനുശേഷവും പ്രശ്നം നിലനിൽക്കുകയാണെങ്കിൽ, ദയവായി ഉപഭോക്തൃ പിന്തുണയെയോ യോഗ്യതയുള്ള ഒരു ടെക്നീഷ്യനെയോ ബന്ധപ്പെടുക.
8 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ | AUCB-1100-pepo |
| ബ്രാൻഡ് | auna |
| സ്പീക്കർ തരം | Passive Dual Subwoofer |
| സബ് വൂഫർ വ്യാസം | 2 x 25 സെന്റീമീറ്റർ (2 x 10 ഇഞ്ച്) |
| പരമാവധി. ഔട്ട്പുട്ട് പവർ | 2 x 600 Watts (1200W total) |
| ആർഎംഎസ് പവർ | 2 x 300 Watts (600W total) |
| സ്പീക്കർ പരമാവധി ഔട്ട്പുട്ട് പവർ | 1600 Watts (overall system peak) |
| ഫ്രീക്വൻസി റേഞ്ച് | 35Hz - 10kHz |
| സംവേദനക്ഷമത | 90dB |
| പ്രതിരോധം | 4 ഓം |
| കാന്തം | 40oz |
| വോയ്സ് കോയിൽ | 2-inch Swivel Coil |
| കോൺ മെറ്റീരിയൽ | Non-pressed Paper Cone with Foam Surround |
| പ്രത്യേക സവിശേഷതകൾ | Blue LED light effect, Durable felt coating, Fixed screw terminals, Transparent acrylic glass protection |
| കണക്റ്റിവിറ്റി ടെക്നോളജി | Auxiliary, RCA (via ampജീവപര്യന്തം) |
| ഇൻപുട്ട് വോളിയംtage (for LED) | 12 വോൾട്ട് |
| ഉൽപ്പന്ന അളവുകൾ (L x W x H) | 60 x 32 x 21 സെ.മീ |
| ഇനത്തിൻ്റെ ഭാരം | 16 കിലോഗ്രാം |
9. വാറൻ്റിയും പിന്തുണയും
This Auna product comes with a limited warranty. Please refer to the warranty documentation provided at the time of purchase for specific terms and conditions.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact your retailer or the manufacturer's customer service department. Keep your purchase receipt and model number (AUCB-1100-pepo) readily available when contacting support.
Manufacturer: auna