Domus Line ST30/12

Domus Line ST30/12 30W 12V Power Supply User Manual

Model: ST30/12

ആമുഖം

This manual provides detailed instructions for the safe and efficient use of the Domus Line ST30/12 30W 12V Power Supply. Please read this manual thoroughly before installation and operation to ensure proper functionality and to prevent damage or injury. This power supply is designed for use with compatible lighting panels, including the TITAN series (maximum 5 panels), PASSEPARTOUT, SMALL, and DATE series.

സുരക്ഷാ നിർദ്ദേശങ്ങൾ

  • Ensure the power supply is disconnected from the mains before any installation, maintenance, or troubleshooting.
  • This product is designed for indoor use only (IP20 rating). Do not expose it to moisture, water, or extreme temperatures.
  • പവർ സപ്ലൈ തുറക്കരുത് casing. ഉള്ളിൽ ഉപയോക്തൃ-സേവനയോഗ്യമായ ഭാഗങ്ങളൊന്നുമില്ല.
  • അമിതമായി ചൂടാക്കുന്നത് തടയാൻ യൂണിറ്റിന് ചുറ്റും ശരിയായ വായുസഞ്ചാരം ഉറപ്പാക്കുക.
  • Connect only compatible 12V DC devices within the specified load range (1-30W).
  • ഇലക്ട്രിക്കൽ കണക്ഷനുകളെക്കുറിച്ച് നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ, യോഗ്യതയുള്ള ഒരു പ്രൊഫഷണലാണ് ഇൻസ്റ്റാളേഷൻ നടത്തേണ്ടത്.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps for proper installation of your Domus Line ST30/12 power supply:

  1. പവർ സപ്ലൈ അൺപാക്ക് ചെയ്യുക: Carefully remove the ST30/12 power supply from its packaging. Inspect for any visible damage.
  2. മൗണ്ടിംഗ് (ഓപ്ഷണൽ): Position the power supply in a dry, well-ventilated area. Ensure it is not covered or enclosed in a way that restricts airflow.
  3. ഔട്ട്പുട്ട് ഉപകരണങ്ങൾ ബന്ധിപ്പിക്കുക: The power supply features a 500 mm output cable with a 12-way distributor and MiniPlug connectors. Connect your compatible 12V DC lighting panels (e.g., TITAN, PASSEPARTOUT, SMALL, DATE series) to the MiniPlug ports on the distributor. Ensure the total load of connected devices does not exceed 30W.
  4. മെയിൻ പവറിലേക്ക് കണക്റ്റുചെയ്യുക: The power supply has a 2000 mm input cable. Plug the input cable into a standard 220-240Vac electrical outlet.
  5. പ്രവർത്തനം സ്ഥിരീകരിക്കുക: Once connected, the lighting panels should illuminate. If not, refer to the Troubleshooting section.
Domus Line ST30/12 Power Supply with cables and connectors

Figure 1: Domus Line ST30/12 Power Supply. This image shows the compact design of the power supply unit, including its input and output cables with MiniPlug connectors, ready for connection to compatible 12V DC lighting systems.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Domus Line ST30/12 power supply operates automatically once connected to a power source and compatible 12V DC devices. It converts the incoming AC voltage to a stable 12V DC output for your lighting applications.

  • പവർ പ്രയോഗിക്കുന്നതിന് മുമ്പ് എല്ലാ കണക്ഷനുകളും സുരക്ഷിതമാണെന്ന് ഉറപ്പാക്കുക.
  • The power supply is designed for continuous operation within its specified load limits.
  • To turn off the connected devices, disconnect the power supply from the mains outlet.

മെയിൻ്റനൻസ്

The Domus Line ST30/12 power supply requires minimal maintenance.

  • വൃത്തിയാക്കൽ: Disconnect the power supply from the mains before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
  • പരിശോധന: Periodically check the cables and connectors for any signs of wear or damage. If any damage is found, discontinue use and replace the unit.
  • വെൻ്റിലേഷൻ: വെന്റിലേഷൻ ഓപ്പണിംഗുകൾ പൊടിയോ അവശിഷ്ടങ്ങളോ കൊണ്ട് അടഞ്ഞിട്ടില്ലെന്ന് ഉറപ്പാക്കുക.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your Domus Line ST30/12 power supply, refer to the following common problems and solutions:

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ബന്ധിപ്പിച്ച ഉപകരണങ്ങളിലേക്ക് വൈദ്യുതിയില്ല.
  • വൈദ്യുതി വിതരണം പ്ലഗിൻ ചെയ്തിട്ടില്ല.
  • വാൾ let ട്ട്‌ലെറ്റ് പ്രവർത്തിക്കുന്നില്ല.
  • അയഞ്ഞ കണക്ഷനുകൾ.
  • ഓവർലോഡ് (ആകെ വാട്ട്tage 30W കവിയുന്നു).
  • Damaged power supply or cables.
  • Ensure the power supply is securely plugged into a live outlet.
  • മറ്റൊരു ഉപകരണം ഉപയോഗിച്ച് ഔട്ട്ലെറ്റ് പരിശോധിക്കുക.
  • Check all MiniPlug connections and the mains plug.
  • Reduce the number of connected devices or replace with lower wattagഇ ഉപകരണങ്ങൾ.
  • If damaged, discontinue use and replace the unit.
Devices flicker or dim.
  • ഇടവിട്ടുള്ള കണക്ഷൻ.
  • ഓവർലോഡ്.
  • Faulty device.
  • എല്ലാ കണക്ഷനുകളും അയഞ്ഞതാണോ എന്ന് പരിശോധിക്കുക.
  • Ensure total load is within 30W.
  • Test devices individually to identify a faulty one.
വൈദ്യുതി വിതരണം ചൂടായതായി തോന്നുന്നു.
  • സാധാരണ പ്രവർത്തനം (നേരിയ ചൂട്).
  • മോശം വെന്റിലേഷൻ.
  • ഓവർലോഡ്.
  • യൂണിറ്റിന് ചുറ്റും മതിയായ വായുസഞ്ചാരം ഉറപ്പാക്കുക.
  • Verify total load does not exceed 30W.
  • If excessively hot, disconnect immediately and check for overload or damage.

ഈ പരിഹാരങ്ങൾ പരീക്ഷിച്ചതിന് ശേഷവും പ്രശ്നം നിലനിൽക്കുകയാണെങ്കിൽ, ദയവായി ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

സ്പെസിഫിക്കേഷനുകൾ

ബ്രാൻഡ്:Domus Line
മോഡൽ:ST30/12
ഇൻപുട്ട് വോളിയംtage:XXX - 220
Putട്ട്പുട്ട് വോളിയംtage:12V DC
ഔട്ട്പുട്ട് പവർ:30 വാട്ട്സ്
ലോഡ് റേഞ്ച്:1 - 30 Watts (Note: Product description mentioned 1-15W, but title and other specs indicate 30W output. Use 1-30W as the operational range.)
ഇൻപുട്ട് കേബിൾ ദൈർഘ്യം:2000 മി.മീ
ഔട്ട്പുട്ട് കേബിൾ ദൈർഘ്യം:500 mm with 12-way distributor
കണക്റ്റർ തരം:MiniPlug
Insulation Degree:II
സംരക്ഷണ സൂചിക:IP20 (ഇൻഡോർ ഉപയോഗം മാത്രം)
Recommended Panels:TITAN series (max 5 panels), PASSEPARTOUT, SMALL, DATE

വാറൻ്റിയും പിന്തുണയും

വാറന്റി വിവരങ്ങൾക്കോ ​​സാങ്കേതിക പിന്തുണയ്ക്കോ, ദയവായി നിങ്ങളുടെ റീട്ടെയിലറെയോ നിർമ്മാതാവിനെയോ നേരിട്ട് ബന്ധപ്പെടുക. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

Manufacturer: Domus Line

Note: Availability of spare parts and software updates is not specified by the manufacturer.

© 2023 Domus Line. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.