ആമുഖം
This manual provides instructions for the Sharper Image Motion Activated Candy Dispenser. This device is designed to dispense small, hard-shelled candies, nuts, and snacks using a touchless motion sensor, promoting hygiene and convenience. It is suitable for use in various settings, including homes and offices.
പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ
- ഈ ഉൽപ്പന്നം 12 വയസ്സിന് താഴെയുള്ള കുട്ടികൾക്ക് ഉപയോഗിക്കാൻ ഉദ്ദേശിച്ചുള്ളതല്ല.
- The dispenser is designed for small, dry food items only. Do not use with liquids or sticky substances.
- Store the dispenser in a cool, dry area to maintain optimal performance and food quality.
- പോളാരിറ്റി മാർക്കിംഗുകൾ അനുസരിച്ച് ബാറ്ററികൾ ശരിയായി ചേർത്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക. പഴയതും പുതിയതുമായ ബാറ്ററികൾ അല്ലെങ്കിൽ വ്യത്യസ്ത തരം ബാറ്ററികൾ കൂട്ടിക്കലർത്തരുത്.
- Remove batteries if the dispenser will not be used for an extended period to prevent leakage.
പാക്കേജ് ഉള്ളടക്കം
- 1x Sharper Image Motion Activated Candy Dispenser Unit
- ഉപയോക്തൃ മാനുവൽ
Note: 4 "AA" batteries are required and not included. An optional 6V DC 0.5A (300mA) AC power adapter is also not included.
സജ്ജമാക്കുക
1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ
- Locate the battery compartment on the underside of the dispenser base.
- ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ തുറക്കുക.
- Insert 4 "AA" batteries (not included), ensuring correct polarity (+/-) as indicated inside the compartment.
- ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.
Alternatively, an optional 6V DC 0.5A (300mA) AC power adapter can be used (not included).
2. ഡിസ്പെൻസർ നിറയ്ക്കൽ
- Before first use, clean the transparent container thoroughly.
- Remove the lid from the top of the dispenser.
- Carefully pour your desired treats into the container. Ensure the items are suitable for dispensing (see "Operating Instructions" for details).
- ലിഡ് സുരക്ഷിതമായി മാറ്റിസ്ഥാപിക്കുക.
Figure 1: Filling the dispenser with treats.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
മോഷൻ സെൻസർ ഉപയോഗിക്കുന്നു
- Place your hand directly under the dispensing chute.
- The built-in motion sensor will detect your hand and activate the dispensing mechanism.
- Hold your hand under the chute for a moment to allow the treats to dispense. The amount dispensed may vary. If no treats dispense on the first attempt, briefly remove your hand and place it back under the sensor.
Figure 2: Hands-free dispensing in action.
Disabling Dispensing (Hidden Button)
A hidden button is located on the back of the dispenser. Pressing this button will temporarily disable the dispensing function, preventing treats from being dispensed even when the motion sensor is activated. Press it again to re-enable dispensing.
Recommended Items for Dispensing
For optimal performance, use items that are hard-shelled, dry, and approximately 0.75 inches (1.9 cm) or smaller in size. Examples ഉൾപ്പെടുന്നു:
- Small Gumballs
- Hard shell, chocolate coated candy (e.g., M&M's)
- Hard shell, fruit flavored candy
- ഹസൽനട്ട്സ്
- ജെല്ലി ബീൻസ്
- Small Jawbreakers
- മക്കാഡമിയ പരിപ്പ്
- പൈൻ പരിപ്പ്
- Shelled, unsalted peanuts
- ഷെൽഡ് പിസ്ത
- Small Jordan almonds
- സോയാ പരിപ്പ്
- സൂര്യകാന്തി വിത്തുകൾ
- മുഴുവൻ ബദാം
- ഉപ്പിട്ട നിലക്കടല
Items NOT Recommended for Dispensing
Avoid using the following items to prevent blockages or damage to the dispenser:
- Candy that is wrapped
- Candy that has a soft chocolate coating
- Candy that is cylindrically or barrel-shaped
- Candy that is gummy
- Raisins or similar dried fruit
- Candy that is sticky
- Items larger than 0.75 inches (1.9 cm)
- ലോഹ വസ്തുക്കൾ
Figure 3: Guide for suitable and unsuitable items.
മെയിൻ്റനൻസ്
വൃത്തിയാക്കൽ
- To clean the dispenser, first ensure it is empty of all treats and batteries are removed.
- ഒരു മൃദുവായ, ഡി ഉപയോഗിച്ച് ബാഹ്യ പ്രതലങ്ങൾ തുടയ്ക്കുകamp തുണി.
- The transparent container can be detached and washed with mild soap and water. Ensure it is completely dry before reassembling and refilling.
- Do not immerse the base unit in water or place it in a dishwasher.
സംഭരണം
When not in use, store the dispenser in a cool, dry place away from direct sunlight and moisture. Remove batteries if storing for an extended period.
ട്രബിൾഷൂട്ടിംഗ്
Dispenser Not Activating or Dispensing
- ബാറ്ററികൾ പരിശോധിക്കുക: Ensure batteries are correctly installed and have sufficient charge. Replace with fresh "AA" batteries if necessary.
- സെൻസർ തടസ്സം: Verify that the motion sensor area is clean and free from obstructions.
- കൈ സ്ഥാപിക്കൽ: Ensure your hand is placed directly under the sensor and held steady for a moment.
- Hidden Button: Check if the hidden button on the back of the dispenser has been pressed, disabling the dispensing function. Press it again to re-enable.
Treats Not Dispensing Properly or Getting Stuck
- Item Suitability: Confirm that the items being dispensed are suitable for the dispenser (refer to "Recommended Items" section). Avoid sticky, wrapped, or oversized items.
- ഓവർഫില്ലിംഗ്: Do not overfill the dispenser, as this can impede the dispensing mechanism.
- തടസ്സം: Gently shake the dispenser or use a soft, non-abrasive tool to clear any blockages in the chute.
ഹ്രസ്വ ബാറ്ററി ലൈഫ്
- ബാറ്ററി ഗുണനിലവാരം: Use high-quality alkaline batteries for best performance and longevity.
- ഉപയോഗ ആവൃത്തി: Frequent use will naturally deplete batteries faster. Consider using an optional AC adapter for continuous power if available.
സ്പെസിഫിക്കേഷനുകൾ
| ബ്രാൻഡ്: | മൂർച്ചയുള്ള ചിത്രം |
| മോഡൽ: | B07KGMDK96 |
| മെറ്റീരിയൽ: | പ്ലാസ്റ്റിക് |
| നിറം: | കറുപ്പ് |
| അളവുകൾ (H x W x D): | Approximately 13.125 in. x 6.00 in. x 6.75 in. (33.3 cm x 15.2 cm x 17.1 cm) |
| ഊർജ്ജ സ്രോതസ്സ്: | 4 "AA" batteries (not included) or optional 6V DC 0.5A (300mA) AC adapter (not included) |
| Max Item Size: | Up to 0.5 inches (1.27 cm) in size (for optimal dispensing) |
ചിത്രം 4: ഉൽപ്പന്ന അളവുകൾ.
വാറൻ്റിയും പിന്തുണയും
വാറന്റി വിവരങ്ങൾക്കോ സാങ്കേതിക പിന്തുണയ്ക്കോ, നിങ്ങളുടെ ഉൽപ്പന്ന പാക്കേജിംഗിനൊപ്പം നൽകിയിരിക്കുന്ന കോൺടാക്റ്റ് വിശദാംശങ്ങൾ പരിശോധിക്കുകയോ ഔദ്യോഗിക ഷാർപ്പർ ഇമേജ് സന്ദർശിക്കുകയോ ചെയ്യുക. webസൈറ്റ്. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.