artika TRK4SUB-N-ON

Artika Subway Bathroom Vanity Light (Model TRK4SUB-N-ON) Instruction Manual

ബ്രാൻഡ്: ആർട്ടിക

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your Artika Subway Bathroom Vanity Light, Model TRK4SUB-N-ON. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Artika Subway Vanity Light features a modern design with premium bubble glass and a brushed nickel finish, providing optimal luminosity for your bathroom. It is designed for wall installation and is dimmable with most LED dimmers.

Artika Subway Bathroom Vanity Light, front view

ചിത്രം 1: മുൻഭാഗം view of the Artika Subway Bathroom Vanity Light.

2. ഉൽപ്പന്ന സവിശേഷതകൾ

  • Premium bubble glass
  • ബ്രഷ് ചെയ്ത നിക്കൽ ഫിനിഷ്
  • Dimmable (Compatible with most LED Dimmers)
  • 2-way installation (Up or Down) - Wall installation only
  • ഹാർഡ്‌വെയർ ഉൾപ്പെടുത്തിയിട്ടുണ്ട്
  • സംയോജിത LED പ്രകാശ സ്രോതസ്സ്

3 സുരക്ഷാ വിവരങ്ങൾ

Always turn off the electrical power at the main circuit breaker or fuse box before beginning installation. Ensure all electrical connections are made in accordance with local codes, ordinances, and the National Electric Code (NEC). If you are unfamiliar with electrical wiring, consult a qualified electrician.

This fixture is designed for indoor use only. Do not install in wet locations. Ensure the mounting surface can support the weight of the fixture.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

4.1. പാക്കേജ് ഉള്ളടക്കം

  • Artika Subway Bathroom Vanity Light Fixture
  • മൗണ്ടിംഗ് ഹാർഡ്‌വെയർ (സ്ക്രൂകൾ, വയർ നട്ടുകൾ, മൗണ്ടിംഗ് പ്ലേറ്റ്)
  • ഇൻസ്ട്രക്ഷൻ മാനുവൽ

4.2. ആവശ്യമായ ഉപകരണങ്ങൾ (ഉൾപ്പെടുത്തിയിട്ടില്ല)

  • സ്ക്രൂഡ്രൈവർ
  • വയർ സ്ട്രിപ്പറുകൾ
  • പ്ലയർ
  • ഇലക്ട്രിക്കൽ ടേപ്പ്
  • സുരക്ഷാ ഗ്ലാസുകൾ

4.3. ഫിക്സ്ചർ മൌണ്ട് ചെയ്യുന്നു

  1. സർക്യൂട്ട് ബ്രേക്കറിൽ പവർ ഓഫ് ചെയ്യുക.
  2. Remove the old fixture (if applicable) and disconnect wiring.
  3. നൽകിയിരിക്കുന്ന സ്ക്രൂകൾ ഉപയോഗിച്ച് മൗണ്ടിംഗ് പ്ലേറ്റ് ജംഗ്ഷൻ ബോക്സിൽ ഘടിപ്പിക്കുക.
  4. Connect the fixture wires to the house wires: black to black (live), white to white (neutral), and bare copper/green to bare copper/green (ground). Secure connections with wire nuts.
  5. എല്ലാ വയറുകളും ജംഗ്ഷൻ ബോക്സിലേക്ക് ശ്രദ്ധാപൂർവ്വം തിരുകുക.
  6. Align the fixture with the mounting plate and secure it with the provided screws. The fixture can be installed for upward or downward light direction.
Artika Subway Bathroom Vanity Light dimensions

Figure 2: Dimensions of the Artika Subway Bathroom Vanity Light, showing length, width, and height.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1. ഓൺ/ഓഫ് ചെയ്യുന്നു

Once installed, the light fixture can be turned on or off using your standard wall switch.

5.2. മങ്ങിയ പ്രവർത്തനം

This Artika Subway Vanity Light is designed to be dimmable. For optimal performance, ensure you use an LED-compatible dimmer switch. Using a non-LED compatible dimmer may result in flickering or improper dimming functionality.

Video: Official Artika video showcasing the product development and design philosophy behind their lighting fixtures, including the Subway Vanity Light.

6. പരിപാലനം

To maintain the appearance and functionality of your light fixture, follow these guidelines:

  • വൃത്തിയാക്കൽ: Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
  • LED കെയർ: This fixture uses integrated LED components, which are designed for long-lasting performance. There are no bulbs to replace.
  • പരിശോധന: എല്ലാ ഇലക്ട്രിക്കൽ കണക്ഷനുകളും മൗണ്ടിംഗ് ഹാർഡ്‌വെയറും ഇറുകിയതാണോ എന്ന് ഇടയ്ക്കിടെ പരിശോധിക്കുക.

7. പ്രശ്‌നപരിഹാരം

If you experience issues with your Artika Subway Bathroom Vanity Light, refer to the following common troubleshooting steps:

  • ലൈറ്റ് ഓണാക്കുന്നില്ല:
    • Ensure the power is on at the circuit breaker.
    • Check all wire connections to ensure they are secure.
    • Verify the wall switch is in the 'ON' position.
  • പ്രകാശം തെറ്റായി മിന്നിമറയുകയോ മങ്ങുകയോ ചെയ്യുന്നു:
    • Confirm that an LED-compatible dimmer switch is being used.
    • അയഞ്ഞ വയർ കണക്ഷനുകൾ പരിശോധിക്കുക.
    • Ensure the dimmer switch is properly installed and rated for LED lighting.
  • അസാധാരണമായ ശബ്ദം:
    • Turn off power and re-check all connections. If the noise persists, consult a qualified electrician.

ഈ ഘട്ടങ്ങൾ പ്രശ്നം പരിഹരിക്കുന്നില്ലെങ്കിൽ, ദയവായി ആർട്ടിക ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

8 സ്പെസിഫിക്കേഷനുകൾ

സ്പെസിഫിക്കേഷൻവിശദാംശങ്ങൾ
ബ്രാൻഡ്ആർട്ടിക്ക
മോഡൽ നമ്പർTRK4SUB-N-ON
മെറ്റീരിയൽഅലോയ് സ്റ്റീൽ, ഗ്ലാസ്
നിറംBrushed Nickel (fixture), Clear (shade)
ശൈലിആധുനികം
ലൈറ്റ് ഫിക്‌ചർ ഫോംമായ
മുറിയുടെ തരംകുളിമുറി
പവർ ഉറവിടംഹാർഡ് വയർഡ്
പ്രകാശ സ്രോതസ്സ്എൽഇഡി
പ്രകാശ സ്രോതസ്സുകളുടെ എണ്ണം1 (integrated LED strip)
വാല്യംtage120 വോൾട്ട്
വാട്ട്tage27 വാട്ട്സ്
തെളിച്ചം1750 ലുമൺ
ഇനത്തിന്റെ അളവുകൾ (L x W x H)35"L x 3"W x 5"H
ഇനത്തിൻ്റെ ഭാരം8 പൗണ്ട്
മങ്ങിയത്അതെ (മിക്ക LED ഡിമ്മറുകളുമായും പൊരുത്തപ്പെടുന്നു)

9. വാറൻ്റിയും പിന്തുണയും

9.1. നിർമ്മാതാവിന്റെ വാറന്റി

This Artika Subway Bathroom Vanity Light comes with a 3-year limited warranty from the manufacturer, Artika for Living Inc. Please refer to the warranty documentation included with your product for full terms and conditions.

9.2. ഉപഭോക്തൃ പിന്തുണ

For technical assistance, replacement parts, or warranty claims, please contact Artika for Living Inc. customer support. You can find more information and contact details on their official webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ആമസോൺ സ്റ്റോർ പേജ് വഴി: Artika Amazon Store.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.